10 Jun
2014
10 Jun
'14
9:58 p.m.
Hi,
On Tue, Jun 10, 2014 at 12:39:08PM -0700, Vaibhav Bedia wrote:
Hi Felipe,
On Jun 10, 2014 11:45 AM, "Felipe Balbi" balbi@ti.com wrote:
pass correct PHY Address when running on SK so that we have working ethernet with this board too.
Signed-off-by: Felipe Balbi balbi@ti.com
board/ti/am43xx/board.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index b184c20..054a452 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -227,16 +227,16 @@ static const struct emif_regs
ddr3_sk_emif_regs_400Mhz = {
.read_idle_ctrl = 0x00050000, .zq_config = 0x50074be4, .temp_alert_config = 0x0,
.emif_ddr_phy_ctlr_1 = 0x0e084007,
.emif_ddr_phy_ctlr_1 = 0x0e084008, .emif_ddr_ext_phy_ctrl_1 = 0x08020080,
.emif_ddr_ext_phy_ctrl_2 = 0x00700070,.emif_ddr_ext_phy_ctrl_3 = 0x00700070,.emif_ddr_ext_phy_ctrl_4 = 0x00700070,.emif_ddr_ext_phy_ctrl_5 = 0x00700070,
.emif_ddr_ext_phy_ctrl_2 = 0x89,.emif_ddr_ext_phy_ctrl_3 = 0x90,.emif_ddr_ext_phy_ctrl_4 = 0x8e,.emif_ddr_ext_phy_ctrl_5 = 0x8d, .emif_rd_wr_lvl_rmp_win = 0x0,
.emif_rd_wr_lvl_rmp_ctl = 0x0,.emif_rd_wr_lvl_ctl = 0x0,.emif_rd_wr_exec_thresh = 0x00000405
.emif_rd_wr_lvl_rmp_ctl = 0x00000000,.emif_rd_wr_lvl_ctl = 0x00000000,.emif_rd_wr_exec_thresh = 0x00000000,};
Merge this hunk with the previous patch in the series?
oops :-) bad rebase, I guess.
--
balbi