On 17:21 Wed 06 May , Dirk Behme wrote:

Some OMAP3 boards need control for external power companion chips. Introduce a CONFIG option for this, to avoid Makefile changes for each board.

please also move it to cpu/arm_cortexa8/omap3/

omap3 and davinci is not a vendor so common code will need to go to drivers or cpu/<arch>/<soc> for the davinci it's already start to move to it

Best Regards, J.

Signed-off-by: Dirk Behme dirk.behme@googlemail.com

Compile tested with ./MAKEALL ARM_CORTEX_A8, boot tested on OMAP3 based BeagleBoard.

Note: This patch trys to fix the first comment of

http://lists.denx.de/pipermail/u-boot/2009-April/051383.html

board/omap3/common/Makefile | 5 +---- doc/README.omap3 | 11 +++++++++++ include/configs/omap3_beagle.h | 1 + include/configs/omap3_overo.h | 1 + include/configs/omap3_pandora.h | 1 + include/configs/omap3_zoom1.h | 1 + 6 files changed, 16 insertions(+), 4 deletions(-)

Index: u-boot-main/doc/README.omap3

--- u-boot-main.orig/doc/README.omap3 +++ u-boot-main/doc/README.omap3 @@ -77,6 +77,17 @@ For all other commands see

help

+Custom configs +==============

+CONFIG_OMAP3_POWER

+Some OMAP3 boards use external power companion chips to be configured. Enable +this CONFIG option in your board specific configuration file if your board +uses such a companion chip.

could you name it ine the config and the file name

Best Regards, J.