Re: [U-Boot] [PATCH v4 1/2] usb: zynqmp: Add XHCI driver support

Hi,

On 4 September 2015 at 00:31, Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com wrote:

Added USB XHCI driver support for zynqmp.

Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com

Changes for v4:

• Added sanity check for index as per review comment

Changes for v3:

• Decreased the phy reset delay to 10 micro secs
• Defined base addresses in board config file as per review comment.

Changes for v2:

• Moved all from xhci-zynqmp.h to .c file as per review comment
• Removed ad-hoc function zynqmp_xhci_core_exit() as per review comment

---

drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-zynqmp.c | 148 ++++++++++++++++++++++++++++++++++++ include/configs/xilinx_zynqmp_ep.h | 2 + 3 files changed, 151 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/host/xhci-zynqmp.c

Can you convert this to use driver model? See xhci-exynos5.c for an example.

Regards, Simon