16 Jan
2004
16 Jan
'04
9:01 a.m.
In message 20040116065725.3643.qmail@web10601.mail.yahoo.com you wrote:
I am using AMD 29F160 2MB on board flash on a custom board. I am using the sbc8260/flash.c as the driver
Are you sure this was a good choice? Why?
/* Reset and Write auto select command: read Manufacturer ID */ addr[0] = 0xf0f0f0f0; addr[0x0555] = 0xAAAAAAAA; addr[0x02AA] = 0x55555555; addr[0x0555] = 0x90909090; udelay (1000);
Is your flash really 4 chips in 8 bit mode?
the flash base. Any solutions?
Check if the flash driver matches your hardware.
Best regards,
Wolfgang Denk
--
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
"...this does not mean that some of us should not want, in a rather
dispassionate sort of way, to put a bullet through csh's head."
- Larry Wall in 1992Aug6.221512.5963@netlabs.com