On 04/10/2018 08:56 PM, Dinh Nguyen wrote:
On 04/10/2018 01:29 PM, Marek Vasut wrote:
On 04/10/2018 08:28 PM, Dinh Nguyen wrote:
Hi,
I'm seeking advice with an observation that I'm seeing on the Cyclone5 devkit/sockit.
I'm working with U-Boot version v2018.05-rc1. Building the u-boot-with-spl.sfp, then writing the sfp file to the 0xa2 partition on the SD card, does not boot, all I get is this:
U-Boot SPL 2018.05-rc1 (Apr 10 2018 - 13:03:48 -0500)
U-Boot SPL 2018.05-rc1 (Apr 10 2018 - 13:03:48 -0500)
U-Boot SPL 2018.05-rc1 (Apr 10 2018 - 13:03:48 -0500)
This issue doesn't happen at all on the DE0 Nano SoC board. I compared the defconfig and came across this. If I remove these config options in the socfpga_sockit_defconfig, then SPL -> U-Boot works fine.
-CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y
I'll continue to debug of course, but was wondering if anyone might have a better idea as to what could be happening, I'd appreciate the insight.
Check the size of the SPL , could it be too big ?
That's a good thought...it could be. The size of the default u-boot-spl-dtb.bin is 58048, removing the SPI, brings that down to 55616, that's smaller than the 64k of OCRAM for SPL?
Right, I think there's something about those last few kiB OR it's the stack that's overwriting piece of U-Boot or malloc area or something. How did it grow so big anyway ?