Hi,
Trying to run the u-boot for taihu board within qemu. but i get some error.
I am using u-boot-latest and qemu-1.6.1.
Command: make distclean make mrproper make ARCH=powerpc CROSS_COMPILE=/tools/bin/powerpc-linux- taihu_defconfig make ARCH=powerpc CROSS_COMPILE=/tools/bin/powerpc-linux- dd if=/dev/zero of=flash.img bs=1M count=512 dd if=u-boot.bin of=flash.img conv=notrunc qemu-system-ppc -M taihu -m 200 -nographic -pflash flash.img
then i get taihu_405ep_init: register cpu ppc4xx_opba_init: offset 00000000ef600600 ppc405_gpio_init: offset 00000000ef600700 ppc4xx_gpt_init: offset 00000000ef600000 taihu_405ep_init: register BIOS Load BIOS from file taihu_405ep_init: register CPLD taihu_405ep_init: Done OCM update ISA 00000000 00000000 (00000000 00000000) DSA 00000000 00000000 (00000000 00000000) Setup PPC405EP clocks - sysclk 33333333 VCO 0 PLL out 33333333 Hz CPU 33333333 PLB 16666666 OPB 8333333 EBC 8333333 MAL 8333333 PCI 16666666 UART0 260416 UART1 260416 qemu: fatal: Trying to execute code outside RAM or ROM at 0x00000700
How can I solve the error? Your feedback would help me a lot.
Thanks in advance, Yours sincerely, Yanzhao Feng
fengyanzhao@tju.edu.cn