Add USB0 nodes and set them to host mode to support USB host and peripheral boot modes
Signed-off-by: Faiz Abbas faiz_abbas@ti.com --- arch/arm/dts/k3-am654-r5-base-board.dts | 35 +++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index e6b78643c1..d43a4edc71 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -278,3 +278,38 @@ #size-cells = <1>; }; }; + +&main_pmx0 { + u-boot,dm-spl; + usb0_pins_default: usb0_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ + >; + u-boot,dm-spl; + }; +}; + +&dwc3_0 { + status = "okay"; + u-boot,dm-spl; + /delete-property/ power-domains; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; +}; + +&usb0_phy { + status = "okay"; + u-boot,dm-spl; + /delete-property/ clocks; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_default>; + dr_mode = "peripheral"; + u-boot,dm-spl; +}; + +&scm_conf { + u-boot,dm-spl; +};