Dear Ryan Mallon,
Add support for Bluewater Systems Snapper9260/9G20 modules. The modules are based on the AT91SAM9260 and AT91SAM9G20 processors respectively and support NAND flash and Ethernet.
Ryan Mallon (3): Add AT91SAM9G20 to list of AT91 processors in soft_i2c driver. Add support for Bluewater Systems Snapper 9260 and 9G20 modules Added Bluewater Systems Snapper 9260 and 9G20 module config to top-level Makefile
Makefile | 13 ++
No additions to Makefile. New board defines go into boards.cfg
board/bluewater/snapper9260/Makefile | 55 +++++++++ board/bluewater/snapper9260/config.mk | 1 +
This file is not required. CONFIG_SYS_TEXT_BASE belongs into your board configuration file in include/configs/. By the way, where is this file?
board/bluewater/snapper9260/snapper9260.c | 177 +++++++++++++++++++++++++++++
Seems to be based on very old Code. See comments there.
drivers/i2c/soft_i2c.c | 2 +-
#if defined(CONFIG_AT91FAMILY) should be used for all AT91, individual AT91 SoCs don't need to be checked anymore. See comment there.
5 files changed, 247 insertions(+), 1 deletions(-) create mode 100644 board/bluewater/snapper9260/Makefile create mode 100644 board/bluewater/snapper9260/config.mk create mode 100644 board/bluewater/snapper9260/snapper9260.c
MAINTAINERS entry missing.
Best Regards, Reinhard