Please ignore this series. I missed "PATCH" string. I will resend the correct patch set. --Marri
-----Original Message----- From: tmarri@apm.com [mailto:tmarri@apm.com] Sent: Tuesday, September 07, 2010 5:19 PM To: u-boot@lists.denx.de Cc: sr@denx.de; Tirumala Marri Subject: [v3 0/2] Add support for new SoC APM82XXX
From: Tirumala Marri tmarri@apm.com
APM8XXXX is Applied Micro Circuits Corporations naming convention for new line of SoCs.
V1:
- Squash some of the patches.
- add space between "||" and "".
- Add spaces around operators.
- Unsigned int to u32.
- Add empty line which was removed.
- remove warning "unused variable" in cpu_init.c
- Remove "All rights reserved" phrase from headers.
- Add empty line which was removed.
- Move EBC definititions to bluestone_config.h file
- Remove reconfigure_EBC() function.
- Remove unused CONFIG_SDRAM16BIT_OFFSET.
- Remove unused CONFIG_SDRAM_INFO_EEPROM_ADDR.
- Add empty lines in bluestone.c file.
- Replacing AC_R | AC_W | AC_X with AC_RWX.
- Remove changes to main Makefile
- Remove NAND references from config file.
- Squash some of the patches.
- Remove top Makefile change.
V2:
- Missing space before "<".
- SDR_AHB_CFG not used, remove.
- boot device dfinitions are board specific ? removed.
- APM82161_MASK not used, remove
- set_mcsr() is already called in ddr init, no need to call here.
- removed finding bootdevice function which is not used.
- Add spaces in tlbentry() function.
- Board early init function is empty remove.
- Remove CONFIG_SYS_EXTSRAM_BASE.
- Set CONFIG_SYS_FLASH_SIZE to 4MB
- Remove CONFIG_SIZE_REDUCE & CONFIG_SECTOR_REDUCE.
- Spaces around " >> " .
- Correct the phy name CONFIG_M88E1111_PHY to CONFIG_RTL8211CL_PHY.
- Removed Defines added to 405ex.
V3:
- Missing TLB entry for CONFIG_SYS_BOOT_BASE_ADDR.
- Correct multiline comment.
- Move CONFIG_SYS_EBC_PB0AP etc to EBC area in the config file.
- remove unused CONFIG_RTL8211CL_PHY.
- Replace hard coded valued for CONFIG_SYS_EBC_CFG with macro definitions.
- board.cfg add the entry in sorted.
- use puts() if there is no formating needed.
- Change APM82XXX to APM821XX
- Modify the way cpu id is printed.
- Correct inadvertent change.
- Sort define list.
- Remove comment for get_sys_info().
- Define a symbolic constat ISRAM1_OCM_SIZE.
- Create apm821xx.h instead of using ppc440.h
Tirumala Marri (2): APM821xx: Add CPU support APM821xx: Add bluestone board support
MAINTAINERS | 3 + MAKEALL | 1 + arch/powerpc/cpu/ppc4xx/cpu.c | 36 ++- arch/powerpc/cpu/ppc4xx/cpu_init.c | 5 +- arch/powerpc/cpu/ppc4xx/speed.c | 76 +++++- arch/powerpc/cpu/ppc4xx/start.S | 11 +- arch/powerpc/cpu/ppc4xx/tlb.c | 2 + arch/powerpc/include/asm/ppc4xx-ebc.h | 4 + arch/powerpc/include/asm/ppc4xx-isram.h | 14 +- arch/powerpc/include/asm/ppc4xx-sdram.h | 12 +- arch/powerpc/include/asm/ppc4xx-uic.h | 5 +- arch/powerpc/include/asm/processor.h | 1 + board/amcc/bluestone/Makefile | 52 ++++ board/amcc/bluestone/bluestone.c | 111 +++++++ board/amcc/bluestone/config.mk | 40 +++ board/amcc/bluestone/init.S | 59 ++++ boards.cfg | 1 + include/apm821xx.h | 493 +++++++++++++++++++++++++++++++ include/configs/bluestone.h | 175 +++++++++++ include/ppc4xx.h | 11 +- 20 files changed, 1087 insertions(+), 25 deletions(-) create mode 100644 board/amcc/bluestone/Makefile create mode 100644 board/amcc/bluestone/bluestone.c create mode 100644 board/amcc/bluestone/config.mk create mode 100644 board/amcc/bluestone/init.S create mode 100644 include/apm821xx.h create mode 100644 include/configs/bluestone.h