On 2023/6/7 01:09, Jagan Teki wrote:
rk3328-xhci has been added due to the fact that the upstream dwc3 is unsupported. Moreover, the driver for rk3328-xhci is not added to the code tree.
By considering these facts and unsupported rk3328-xhci this patch is dropping all related code from DT. However, the DWC3 is fixed now in dwc3-generic and RK3328 USB 3.0 is functional in upcoming patches.
Let's drop it.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
Changes for v2:
none
arch/arm/dts/rk3328-evb-u-boot.dtsi | 5 ----- arch/arm/dts/rk3328-roc-cc-u-boot.dtsi | 14 -------------- arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi | 5 ----- arch/arm/dts/rk3328-rock64-u-boot.dtsi | 15 --------------- arch/arm/dts/rk3328-u-boot.dtsi | 11 ----------- 5 files changed, 50 deletions(-)
diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi index 4bfa0c2330..f9c729d3bd 100644 --- a/arch/arm/dts/rk3328-evb-u-boot.dtsi +++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi @@ -44,8 +44,3 @@ /* Integrated PHY unsupported by U-boot */ status = "broken"; };
-&usb_host0_xhci {
- vbus-supply = <&vcc5v0_host_xhci>;
- status = "okay";
-}; diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi index 27a454f017..2062f34bf8 100644 --- a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi +++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi @@ -48,20 +48,6 @@ bootph-pre-ram; };
-&usb_host0_xhci {
- vbus-supply = <&vcc_host1_5v>;
- status = "okay";
-};
-/*
- This makes XHCI responsible for toggling VBUS. This is needed to work
- around an issue where either XHCI only works with USB 2.0 or OTG doesn't
- work, depending on how VBUS is configured. Having USB 3.0 seems better.
- */
-&vcc_host1_5v {
- /delete-property/ regulator-always-on;
-};
- /* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram;
diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi index 088e21c76a..1f220c6dcd 100644 --- a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi +++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi @@ -45,11 +45,6 @@ bootph-pre-ram; };
-&usb_host0_xhci {
- vbus-supply = <&vcc_host_5v>;
- status = "okay";
-};
- /* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram;
diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi index c20a99a620..849854302e 100644 --- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi +++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi @@ -48,21 +48,6 @@ bootph-pre-ram; };
-&usb_host0_xhci {
- vbus-supply = <&vcc_host_5v>;
- status = "okay";
-};
-/*
- This makes XHCI responsible for toggling VBUS. This is needed to work
- around an issue where either XHCI only works with USB 2.0 or OTG doesn't
- work, depending on how VBUS is configured. Having USB 3.0 seems better.
- */
-&vcc_host_5v {
- /delete-property/ regulator-always-on;
- /delete-property/ regulator-boot-on;
-};
- /* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram;
diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi index 668f8ca29d..ce96ce40a7 100644 --- a/arch/arm/dts/rk3328-u-boot.dtsi +++ b/arch/arm/dts/rk3328-u-boot.dtsi @@ -26,17 +26,6 @@ 0x0 0xff720000 0x0 0x1000 0x0 0xff798000 0x0 0x1000>; };
usb_host0_xhci: usb@ff600000 {
compatible = "rockchip,rk3328-xhci";reg = <0x0 0xff600000 0x0 0x100000>;interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;snps,dis-enblslpm-quirk;snps,phyif-utmi-bits = <16>;snps,dis-u2-freeclk-exists-quirk;snps,dis-u2-susphy-quirk;status = "disabled";}; };
&cru {