On Fri, Oct 4, 2013 at 4:06 PM, Jagan Teki jagannadh.teki@gmail.com wrote:
Hi,
Try to fix the above issues. Use u-boot-spi.git repo with master-probe branch. Please test the same on your hw and let me know for any issues.
On Tue, Aug 27, 2013 at 6:54 PM, Jagan Teki jagannadh.teki@gmail.com wrote:
On Tue, Aug 27, 2013 at 2:40 PM, Jagan Teki jagannadh.teki@gmail.com wrote:
Hi,
On Tue, Aug 27, 2013 at 4:11 AM, Asok Subramanian asok@vyassoft.com wrote:
Fix problems in chip select selection in imx23,28 spi code
The spi function code for imx23,28 currently does not work for chip select other than 0. This is because the register HW_SSP_CTRL0 is first reset and the code does not load the CS bits again into HW_SSP_CTRL0 after the reset. The proposed fix reloads the CS bits after the reset.
Signed-off-by: Asok Subramanian <asok at vyassoft.com>
drivers/spi/mxs_spi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index 3cf7142..15681dc 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -32,6 +32,7 @@ struct mxs_spi_slave { uint32_t max_khz; uint32_t mode; struct mxs_ssp_regs *regs;
- unsigned int cs;
};
static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave) @@ -74,6 +75,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, mxs_slave->max_khz = max_hz / 1000; mxs_slave->mode = mode; mxs_slave->regs = mxs_ssp_regs_by_bus(bus);
mxs_slave->cs = cs; ssp_regs = mxs_slave->regs;
reg = readl(&ssp_regs->hw_ssp_ctrl0);
@@ -102,7 +104,7 @@ int spi_claim_bus(struct spi_slave *slave)
mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
- writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0);
- writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT | (mxs_slave->cs) <<
MXS_SSP_CHIPSELECT_SHIFT, &ssp_regs->hw_ssp_ctrl0);
reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS; reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;-- 1.7.9.5
Please use the proper commit head. Fix problems in chip select selection in imx23,28 spi code spi: mxs_spi: <EDIT THE TEXT>
And also please fix the check-patch errors:
ERROR: Unrecognized email address: 'Asok Subramanian <asok at vyassoft.com>' #18: Signed-off-by: Asok Subramanian <asok at vyassoft.com>
ERROR: patch seems to be corrupt (line wrapped?) #29: FILE: drivers/spi/mxs_spi.c:31: uint32_t max_khz;
WARNING: line over 80 characters #49: FILE: drivers/spi/mxs_spi.c:104:
- writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT | (mxs_slave->cs) <<
MXS_SSP_CHIPSELECT_SHIFT, &ssp_regs->hw_ssp_ctrl0);
total: 2 errors, 1 warnings, 22 lines checked
Ping.