OK, thanks for the feedback. I'll check out netconsole.
Best regards,
Tony.
--
-----Original Message----- From: Wolfgang Denk [mailto:wd@denx.de] Sent: 01 August 2005 15:40 To: Tony Ford Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] MPC852T ethernet
In message 30062B7EA51A9045B9F605FAAC1B4F62511CBC@exch01.quadrics.com you wrote:
Given that u-boot can handle ethernet comms. I was looking
at how I could
enable telnet as an alternative to a serial connection.
You cannot. Ther eis netconsole, though. Please read the documentation.
The first step would seem to be to respond to interrupts on receipt of an ethernet packet. It was this first step I was asking
for feedback
on.
No such thing is needed for netconsole.
Also, processing an interrupt is not enough. Some U-Boot drivers already use interrupts. That's not the problem. But U-Boot is inherently single-threaded. This is a much harder restriction.
Best regards,
Wolfgang Denk
-- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de "We learn from history that we learn nothing from history."
- George Bernard Shaw