Wolfgang Denk <wd <at> denx.de> writes:
In message <7febb0a1050706134762dfe45e <at> mail.gmail.com> you wrote:
I complie new u-boot for Flash SST39VF3201. It complete and can boot with u-boot. Follow that. boot 1.0 (Nov 25 2003 - 23:08:05)
Uncompressing image... U-Boot 1.1.2 (Jun 25 2005 - 22:30:04)
And which board is this exactly, and which board configuration did you use?
U-Boot> saveenv Saving Environment to Flash... Error: start address not on sector boundary
and Flash Organizations follow this code.
OrgDef OrgSST39VF3201[] = { { 1,16*1024 }, /* 1 * 16 kBytes sectors */ { 2,8*1024 }, /* 2 * 8 kBytes sectors */ { 1,32*1024 }, /* 1 * 32 kBytes sectors */ { 63,64*1024 }, /* 31 * 64 kBytes sectors */ };
Why it show error.?
Because your flash driver was misconfigured.
How to resolve this error.?
Fix your flash driver configuration.
[I cannot give any better help without even knowing which board you are talking about.]
Best regards,
Wolfgang Denk
Hi,
I am also getting the same error like below, but i dont know why it is coming!
i am using Versatile PB by ARM and i am using U-boot-1.1.3, and i am using the flash of size 64M
Versatile # saveenv Saving Environment to Flash... Error: start address not on sector boundary
can any body give a hint to solve this problem,
Thanks in advance, Saikrishna Gajula