-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot- bounces@lists.denx.de] On Behalf Of Luka Perkov Sent: 18 April 2012 00:52 To: u-boot@lists.denx.de Cc: dreagle@doukki.net Subject: [U-Boot] [PATCH v8] kirkwood: add NAS62x0 board support
Add support for new boards RaidSonic ICY BOX NAS6210 and NAS6220.
NAS6210 has 1 SATA and 1 eSATA port while NAS6220 has 2 SATA ports.
More information about the boards can be found here:
http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7036 http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7515
Signed-off-by: Luka Perkov uboot@lukaperkov.net Signed-off-by: Gerald Kerma dreagle@doukki.net Signed-off-by: Simon Baatz gmbnomis@gmail.com
Changes from version v1:
- use tools/checkpatch.pl to locate patch errors and fix them
- add two entries in boards.cfg, one for each board
- fixed CONFIG_RESET_PHY_R
- don't define values for macros that enable features only
- remove static RAM configuration
- fix comments
- use only CONFIG_ENV_OFFSET and remove CONFIG_ENV_ADDR
- clean coding style
- add entry in MAINTAINERS file
Changes from version v2:
- use defined() in macros for board selection for robustness
Changes from version v3:
- don't use utf8 for Geralds name
- don't mix upper/lower case in kwbimage.cfg
- fix prompt
Changes from version v4:
- fix board Makefile (clean and distclean)
- use generic way to handle arch number of the board
- fix MAINTAINERS file
- move code from Marvell to raidsonic folder
- use CONFIG_MACH_TYPE
- set only necessary GPIOs
- use link instead of address for license
- add few links about board being supported for quick reference
- add previous change logs
- multiple updates to kwbimage.cfg, thank you Simon
Changes from version v5:
- remove typo from kwbimage.cfg (duplicated lines), thank you David
- clean up comments in kwbimage.cfg
Changes from version v6:
- replace KW_SATA_PORT0_OFFSET with MV_SATA_PORT0_OFFSET
- change commit message
Changes from version v7:
- use same config for both boards, because fix for second SATA or
eSATA port is here:
http://lists.denx.de/pipermail/u-boot/2012-April/122594.html
Without that patch uboot *will* work.
- change some files because of the above
MAINTAINERS | 4 + board/raidsonic/ib62x0/Makefile | 43 +++++++++ board/raidsonic/ib62x0/ib62x0.c | 79 ++++++++++++++++ board/raidsonic/ib62x0/ib62x0.h | 40 +++++++++ board/raidsonic/ib62x0/kwbimage.cfg | 169 +++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/ib62x0.h | 152 +++++++++++++++++++++++++++++++ 8 files changed, 489 insertions(+), 1 deletion(-)
Applied to u-boot-marvell.git master branch
Regards.. Prafulla . . .