On Tue, Dec 12, 2017 at 02:43:38PM +0530, Jagan Teki wrote:
On Tue, Dec 12, 2017 at 1:34 PM, Maxime Ripard maxime.ripard@free-electrons.com wrote:
On Tue, Dec 12, 2017 at 12:28:26PM +0530, Jagan Teki wrote:
USB-OTG require MUSB driver along with PHY#0 id(PH9) and/or vbus pin through AXP_GPIO driver.
This patch add support for it.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com
configs/bananapi_m64_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig index 461567f..55feafe 100644 --- a/configs/bananapi_m64_defconfig +++ b/configs/bananapi_m64_defconfig @@ -4,6 +4,8 @@ CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_USB0_ID_DET="PH9" +CONFIG_AXP_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y @@ -14,4 +16,5 @@ CONFIG_SPL=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_GADGET=y
Did you test the host mode as well?
No, I've not tried host mode yet.
Then you didn't test that at least the ID pin and the VBUS control was working :)
Maxime