On 04/08/13 15:44, Dani Krishna Mohan wrote:
This patch makes required changes to make use of I2S0 channel instead of I2S1 channel on exynos5250.
Signed-off-by: Dani Krishna Mohan krishna.md@samsung.com
changes in V2:
- None
arch/arm/include/asm/arch-exynos/i2s-regs.h | 6 ++++++ drivers/sound/samsung-i2s.c | 16 ++++++++++------ 2 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/i2s-regs.h b/arch/arm/include/asm/arch-exynos/i2s-regs.h index 613b9b7..4a4a7a0 100644 --- a/arch/arm/include/asm/arch-exynos/i2s-regs.h +++ b/arch/arm/include/asm/arch-exynos/i2s-regs.h @@ -8,10 +8,12 @@ #ifndef __I2S_REGS_H__ #define __I2S_REGS_H__
+#define CON_RESET (1 << 31) #define CON_TXFIFO_FULL (1 << 8) #define CON_TXCH_PAUSE (1 << 4) #define CON_ACTIVE (1 << 0)
+#define MOD_OP_CLK (3 << 30) #define MOD_BLCP_SHIFT 24 #define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT) #define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT) @@ -24,6 +26,7 @@ #define MOD_BLC_MASK (3 << 13)
#define MOD_SLAVE (1 << 11) +#define MOD_RCLKSRC (0 << 10) #define MOD_MASK (3 << 8) #define MOD_LR_LLOW (0 << 7) #define MOD_LR_RLOW (1 << 7) @@ -47,4 +50,7 @@ #define FIC_TXFLUSH (1 << 15) #define FIC_RXFLUSH (1 << 7)
+#define PSREN (1 << 15) +#define PSVAL (3 << 8)
#endif /* __I2S_REGS_H__ */ diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c index 49921e5..8e8a2bc 100644 --- a/drivers/sound/samsung-i2s.c +++ b/drivers/sound/samsung-i2s.c @@ -303,21 +303,25 @@ int i2s_tx_init(struct i2stx_info *pi2s_tx) (struct i2s_reg *)pi2s_tx->base_address;
/* Initialize GPIO for I2s */
- exynos_pinmux_config(PERIPH_ID_I2S1, 0);
- exynos_pinmux_config(PERIPH_ID_I2S0, 0);
please don't replacing. please adds support i2c0.
/* Set EPLL Clock */
- ret = set_epll_clk(pi2s_tx->audio_pll_clk);
- ret = set_epll_clk(pi2s_tx->samplingrate * pi2s_tx->rfs * 4); if (ret != 0) { debug("%s: epll clock set rate falied\n", __func__); return -1; }
- /* Select Clk Source for Audio1 */
- /* Select Clk Source for Audio0 */ set_i2s_clk_source();
- /* Set Prescaler to get MCLK */
- set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
(pi2s_tx->samplingrate * (pi2s_tx->rfs)));
/*Reset the i2s module */
writel(CON_RESET, &i2s_reg->con);
writel(MOD_OP_CLK | MOD_RCLKSRC, &i2s_reg->mod);
/* set i2s prescaler */
writel(PSREN | PSVAL, &i2s_reg->psr);
/* Configure I2s format */ ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
Thanks, Minkyu Kang.