On 22/02/2017 16:43, Fabio Estevam wrote:
According to the MX7D fuse map the speed grade of the parts, which return '1' is 500MHz instead of 850MHz, so fix it accordingly.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com
arch/arm/cpu/armv7/mx7/soc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c index dead1d3..b9fb97b 100644 --- a/arch/arm/cpu/armv7/mx7/soc.c +++ b/arch/arm/cpu/armv7/mx7/soc.c @@ -103,7 +103,7 @@ struct imx_sec_config_fuse_t const imx_sec_config_fuse = { */ #define OCOTP_TESTER3_SPEED_SHIFT 8 #define OCOTP_TESTER3_SPEED_800MHZ 0 -#define OCOTP_TESTER3_SPEED_850MHZ 1 +#define OCOTP_TESTER3_SPEED_500MHZ 1 #define OCOTP_TESTER3_SPEED_1GHZ 2
u32 get_cpu_speed_grade_hz(void) @@ -121,8 +121,8 @@ u32 get_cpu_speed_grade_hz(void) switch(val) { case OCOTP_TESTER3_SPEED_800MHZ: return 792000000;
- case OCOTP_TESTER3_SPEED_850MHZ:
return 852000000;
- case OCOTP_TESTER3_SPEED_500MHZ:
return 500000000;
Applied to u-boot-imx, thanks !
Best regards, Stefano Babic