Haavard Skinnemoen schrieb:
Use the MMU hardware to set up 1:1 mappings between physical and virtual addresses. This allows us to bypass the cache when accessing the flash without having to do any physical-to-virtual address mapping in the CFI driver.
The virtual memory mappings are defined at compile time through a sorted array of virtual memory range objects. When a TLB miss exception happens, the exception handler does a binary search through the array until it finds a matching entry and loads it into the TLB. The u-boot image itself is covered by a fixed TLB entry which is never replaced.
This makes the 'saveenv' command work again on ATNGW100 and other boards using the CFI driver, hopefully without breaking any rules.
Signed-off-by: Haavard Skinnemoen haavard.skinnemoen@atmel.com
arch/avr32/cpu/at32ap700x/Makefile | 2 +- arch/avr32/cpu/at32ap700x/mmu.c | 78 ++++++++++++++++++++ arch/avr32/cpu/start.S | 19 +++-- arch/avr32/include/asm/arch-at32ap700x/addrspace.h | 5 +- arch/avr32/include/asm/arch-at32ap700x/mmu.h | 66 +++++++++++++++++ arch/avr32/lib/board.c | 4 + board/atmel/atngw100/atngw100.c | 15 ++++ board/atmel/atstk1000/atstk1000.c | 15 ++++ board/earthlcd/favr-32-ezkit/favr-32-ezkit.c | 15 ++++ board/mimc/mimc200/mimc200.c | 20 +++++ board/miromico/hammerhead/hammerhead.c | 15 ++++ include/configs/atngw100.h | 3 + include/configs/atstk1002.h | 3 + include/configs/atstk1003.h | 3 + include/configs/atstk1004.h | 3 + include/configs/atstk1006.h | 3 + include/configs/favr-32-ezkit.h | 3 + include/configs/hammerhead.h | 3 + include/configs/mimc200.h | 3 + 19 files changed, 267 insertions(+), 11 deletions(-) create mode 100644 arch/avr32/cpu/at32ap700x/mmu.c create mode 100644 arch/avr32/include/asm/arch-at32ap700x/mmu.h
Applied to u-boot-atmel/avr32 Thanks, Reinhard