On Wed, 17 Jan 2024 12:15:25 +0100 Nam Cao namcao@linutronix.de wrote:
Add the axp15060 regulator device. OpenSBI uses this device to perform board reset and shutdown.
Signed-off-by: Nam Cao namcao@linutronix.de
arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi index e94f9fe826..388d29727f 100644 --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi @@ -127,6 +127,11 @@ pinctrl-0 = <&i2c5_pins>; status = "okay";
- pmic@36 {
compatible = "stf,axp15060-regulator";
I should mention that Linux is using the string "x-powers,axp15060" for the same device, but OpenSBI is using this one. So I'm not entirely sure which one should I use here in U-Boot. If we use Linux's string, then OpenSBI needs to be changed.
reg = <0x36>;- };
- eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>;