From: Marcel Ziswiler marcel.ziswiler@toradex.com
Add support for distro boot. This is especially helpful for external devices. There is a global boot command which scans a predefined list of boot targets: run distro_bootcmd
As well as direct boot commands such as: run bootcmd_mmc1 run bootcmd_mmc2 run bootcmd_usb run bootcmd_dhcp ...
Refer to doc/README.distro for details.
While at it, remove the CONFIG_DRIVE_TYPES define which has not been used and was meant to be used for multi device boot support which is now provided by distroboot.
Signed-off-by: Stefan Agner stefan.agner@toradex.com Acked-by: Max Krummenacher max.krummenacher@toradex.com Acked-by: Marcel Ziswiler marcel.ziswiler@toradex.com
---
include/configs/apalis_imx6.h | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 382048d2ef..5f865e1f08 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -109,20 +109,19 @@
#define CONFIG_LOADADDR 0x12000000
-#ifdef CONFIG_CMD_SATA -#define CONFIG_DRIVE_SATA "sata " +#ifndef CONFIG_SPL_BUILD +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 2) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> +#undef BOOTENV_RUN_NET_USB_START +#define BOOTENV_RUN_NET_USB_START "" #else -#define CONFIG_DRIVE_SATA +#define BOOTENV #endif
-#ifdef CONFIG_CMD_MMC -#define CONFIG_DRIVE_MMC "mmc " -#else -#define CONFIG_DRIVE_MMC -#endif - -#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC - #define DFU_ALT_EMMC_INFO \ "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ "boot part 0 1;" \ @@ -149,7 +148,9 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x11000000\0" \ - "ramdisk_addr_r=0x12100000\0" + "pxefile_addr_r=0x17100000\0" \ + "ramdisk_addr_r=0x12100000\0" \ + "scriptaddr=0x17000000\0"
#define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ @@ -191,9 +192,10 @@ #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ + BOOTENV \ "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "run nfsboot ; echo ; echo nfsboot failed ; " \ - "usb start ;" \ + "run distro_bootcmd ; " \ + "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=uImage\0" \ "console=ttymxc0\0" \