On Saturday, October 25, 2014 at 11:43:05 PM, Fabio Estevam wrote:
Hi Michael,
On Thu, Oct 23, 2014 at 5:07 AM, Michael Thalmeier
michael.thalmeier@hale.at wrote:
Hi Marek, and Fabio
Shouldn't this be conditional?
#if defined CONFIG_MXS_ENABLE_4P2 mxs_power_enable_4p2(); #endif
Then the boards that need this power supply enable CONFIG_MXS_ENABLE_4P2 in its config file.
No, we want to start the DCDC converter unconditionally when running on
battery
power to increase efficiency.
I just stumbled upon this, because our board does not boot reliably any more with this change. Perhaps we have a special situation in that our board is powered via DCDC_BATT only by an external power source (no battery).
I am currently working on creating a patch to only conditionally enabling this feature, or to enable it by default and have it conditionally be disabled for boards that are known to have problems with this.
Which approach seems to be more feasible to you?
Initially I proposed something like:
#if defined CONFIG_MXS_ENABLE_4P2 mxs_power_enable_4p2(); #endif
,but Marek was not happy about it, so let's wait for his thoughts. Marek?
Can you share the schematic of your power distribution network ? I would like to check a couple of things in there. I suspect there is a common problem with MX23 and MX28 based designs discovered by Juha and I'd like to make sure you don't suffer from it.
It's OK to send the schematic off-list.
Thanks!
Best regards, Marek Vasut