Hi Rajeshwari,
On Wed, Jan 23, 2013 at 11:05 PM, Rajeshwari Birje rajeshwari.birje@gmail.com wrote:
Hi Simon,
Thank you for comments.
On Tue, Jan 22, 2013 at 8:25 PM, Simon Glass sjg@chromium.org wrote:
Hi Rajeshwari,
On Mon, Jan 21, 2013 at 2:52 AM, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
This patch sets high a GPIO to enable the codec MAX98095
Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
board/samsung/smdk5250/smdk5250.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 12cc03e..6f2e067 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -56,6 +56,18 @@ int board_usb_vbus_init(void) } #endif
+#ifdef CONFIG_SOUND_MAX98095 +static void board_enable_audio_codec(void) +{
struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();/* Enable MAX98095 Codec */s5p_gpio_direction_output(&gpio1->x1, 7, 1);s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);This GPIO is hard-coded - does the FDT version of this file do this differently?
For FDT support of same we need gpio numbering feature which is still not merged in the mainline code. Hence currently the same has been hard coded for MAX98095 on Snow.
Yes I see, thank you.
Acked-by: Simon Glass sjg@chromium.org
+} +#endif
int board_init(void) { gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); @@ -65,6 +77,9 @@ int board_init(void) #ifdef CONFIG_USB_EHCI_EXYNOS board_usb_vbus_init(); #endif +#ifdef CONFIG_SOUND_MAX98095
board_enable_audio_codec();+#endif return 0; }
-- 1.7.4.4
Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- Regards, Rajeshwari Shinde