Hi Ladislav,
On 14/05/2018 09:17, Ladislav Michl wrote:
MMC is not initialized in SPL, so it cannot load u-boot.img preventing boot from MMC.
Also driver specific functions are guarded with generic configuration options which leads to build failures when device driver is not enabled in config. Fix that by using driver specific defines.
Signed-off-by: Ladislav Michl ladis@linux-mips.org
Stefano,
if want this patch to be splitted, just let me know. I didn't want to make it two fewliners...
Patch is fine IMHO. It will be pushed by Tom's TI tree.
board/technexion/twister/twister.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index 1166886e1d..0590e5f8af 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -18,10 +18,8 @@ #include <spl.h> #include <mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_USB_EHCI_HCD #include <usb.h> #include <asm/ehci-omap.h> -#endif #include "twister.h"
DECLARE_GLOBAL_DATA_PTR; @@ -45,7 +43,7 @@ static const u32 gpmc_XR16L2751[] = { XR16L2751_GPMC_CONFIG6, };
-#ifdef CONFIG_USB_EHCI_HCD +#ifdef CONFIG_USB_EHCI_OMAP static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, @@ -118,19 +116,20 @@ void set_muxconf_regs(void)
int board_eth_init(bd_t *bis) { +#ifdef CONFIG_DRIVER_TI_EMAC davinci_emac_initialize();
+#endif /* init cs for extern lan */ enable_gpmc_cs_config(gpmc_smc911, &gpmc_cfg->cs[5], CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
- if (smc911x_initialize(0, CONFIG_SMC911X_BASE) <= 0)
printf("\nError initializing SMC911x controlleri\n");+#ifdef CONFIG_SMC911X
- return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#else return 0; +#endif }
-#if defined(CONFIG_MMC_OMAP_HS) && \
- !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_MMC_OMAP_HS) int board_mmc_init(bd_t *bis) { return omap_mmc_init(0, 0, 0, -1, -1);
Acked-by: Stefano Babic sbabic@denx.de
Best regards, Stefano Babic