4 Feb
2014
4 Feb
'14
12:24 a.m.
On Fri, 2014-01-31 at 10:05 -0800, York Sun wrote:
On 01/31/2014 03:16 AM, Alexander Graf wrote:
+/*
- DDR Setup
- */
+#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_CHIP_SELECTS_PER_CTRL 0
I don't know if the qemu has PCI, DDR, etc. Setting the above line to 0 will actually disable DDR controllers. Is that what you want?
QEMU does not emulate the DDR controller.
+/* Get RAM size from device tree */ +#define CONFIG_DDR_SPD
You enabled SPD but I don't see the I2C address. Did you miss something, or you don't really use SPD?
This should be removed.
-Scott