From: Fabio Estevam fabio.estevam@freescale.com
MX28 can boot from SSP0 or SSP1, so it is better not to hardcode the SSP port in the instructions.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- doc/README.mx28_common | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/doc/README.mx28_common b/doc/README.mx28_common index 6618908..bd12cab 100644 --- a/doc/README.mx28_common +++ b/doc/README.mx28_common @@ -100,9 +100,7 @@ discussed in the following chapters. -----------------------------------------------------------
To boot a MX28 based board from SD, set the boot mode DIP switches according -to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=SSP0, SD/MMC master on -SSP0, 3.3V. - +to i.MX28 manual chapter 12.2.1 (Table 12-2).
An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition table, which in turn carries a partition of special type and which contains a