This change adds a basic support for Embest/Timll DevKit3250 board, NOR and UART are the only supported peripherals for a moment. The board doesn't require low-level init, because the initial SDRAM and GPIO configuration is performed during kickstart bootloader execution.
Signed-off-by: Vladimir Zapolskiy vz@mleia.com Cc: Albert ARIBAUD albert.u.boot@aribaud.net Cc: Wolfgang Denk wd@denx.de
Acked-by: Marek Vasut marek.vasut@gmail.com
Changes from v4 to v5:
- fixed bi_boot_params initialization
- cosmetic changes in board configuration
Changes from v3 to v4:
- removed dcache flushing from board_init()
- tabs instead of spaces in board config file
Changes from v2 to v3:
- updated a relocation address
- combined a record in maintainers file into the patch
- use high speed UART2 by default
Changes from v1 to v2:
- corrected address in GPLv2+ licence header in files
- removed clean and distclean targets from board makefile
- do not set machine id explicitly, if CONFIG_MACH_TYPE is defined
- minor indentation cleanups
MAINTAINERS | 4 + board/timll/devkit3250/Makefile | 44 +++++++++++++ board/timll/devkit3250/devkit3250.c | 65 +++++++++++++++++++ boards.cfg | 1 + include/configs/devkit3250.h | 117 +++++++++++++++++++++++++++++++++++ 5 files changed, 231 insertions(+), 0 deletions(-) create mode 100644 board/timll/devkit3250/Makefile create mode 100644 board/timll/devkit3250/devkit3250.c create mode 100644 include/configs/devkit3250.h
diff --git a/MAINTAINERS b/MAINTAINERS index 4bf12b5..68dedae 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -914,6 +914,10 @@ Sughosh Ganu urwithsughosh@gmail.com
hawkboard ARM926EJS (OMAP-L138)
+Vladimir Zapolskiy vz@mleia.com
- devkit3250 lpc32xx
Unknown / orphaned boards: diff --git a/board/timll/devkit3250/Makefile b/board/timll/devkit3250/Makefile new file mode 100644 index 0000000..ea7827c --- /dev/null +++ b/board/timll/devkit3250/Makefile @@ -0,0 +1,44 @@ +# +# Copyright (C) 2011 by Vladimir Zapolskiy vz@mleia.com +# Copyright (C) 2008, Guennadi Liakhovetski lg@denx.de +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301, USA. +#
+include $(TOPDIR)/config.mk
+LIB = $(obj)lib$(BOARD).o
+COBJS := devkit3250.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS))
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+#########################################################################
+# defines $(obj).depend target +include $(SRCTREE)/rules.mk
+sinclude $(obj).depend
+######################################################################### diff --git a/board/timll/devkit3250/devkit3250.c b/board/timll/devkit3250/devkit3250.c new file mode 100644 index 0000000..6b0ec80 --- /dev/null +++ b/board/timll/devkit3250/devkit3250.c @@ -0,0 +1,65 @@ +/*
- Embest/Timll DevKit3250 board support
- Copyright (C) 2011 Vladimir Zapolskiy vz@mleia.com
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301, USA.
- */
+#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/cpu.h> +#include <asm/arch/emc.h>
+DECLARE_GLOBAL_DATA_PTR;
+static struct emc_regs *emc = (struct emc_regs *)EMC_BASE;
+int board_early_init_f(void) +{
- lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
- return 0;
+}
+int board_init(void) +{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+#ifdef CONFIG_SYS_FLASH_CFI
- /* Use 16-bit memory interface for NOR Flash */
- emc->stat[0].config = EMC_STAT_CONFIG_PB | EMC_STAT_CONFIG_16BIT;
- /* Change the NOR timings to optimum value to get maximum bandwidth */
- emc->stat[0].waitwen = EMC_STAT_WAITWEN(1);
- emc->stat[0].waitoen = EMC_STAT_WAITOEN(1);
- emc->stat[0].waitrd = EMC_STAT_WAITRD(12);
- emc->stat[0].waitpage = EMC_STAT_WAITPAGE(12);
- emc->stat[0].waitwr = EMC_STAT_WAITWR(5);
- emc->stat[0].waitturn = EMC_STAT_WAITTURN(2);
+#endif
- return 0;
+}
+int dram_init(void) +{
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);- return 0;
+} diff --git a/boards.cfg b/boards.cfg index 0b32532..24a98fe 100644 --- a/boards.cfg +++ b/boards.cfg @@ -176,6 +176,7 @@ omap730p2_cs0boot arm arm926ejs omap730p2 ti omap omap730p2_cs3boot arm arm926ejs omap730p2 ti omap omap730p2:CS3_BOOT edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon +devkit3250 arm arm926ejs devkit3250 timll lpc32xx versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h new file mode 100644 index 0000000..9f15ffb --- /dev/null +++ b/include/configs/devkit3250.h @@ -0,0 +1,117 @@ +/*
- Embest/Timll DevKit3250 board configuration file
- Copyright (C) 2011 Vladimir Zapolskiy vz@mleia.com
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- as published by the Free Software Foundation; either version 2
- of the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301, USA.
- */
+#ifndef __CONFIG_DEVKIT3250_H__ +#define __CONFIG_DEVKIT3250_H__
+/* SoC and board defines */ +#include <asm/sizes.h> +#include <asm/arch/cpu.h>
+/*
- Define DevKit3250 machine type by hand until it lands in mach-types
- */
+#define MACH_TYPE_DEVKIT3250 3697 +#define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT3250
+#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F
+/*
- Memory configurations
- */
+#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_STACKSIZE SZ_32K +#define CONFIG_SYS_MALLOC_LEN SZ_1M +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE +#define CONFIG_SYS_SDRAM_SIZE SZ_64M +#define CONFIG_SYS_TEXT_BASE 0x83FA0000 +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + SZ_32K) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - SZ_1M)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \
- GENERATED_GBL_DATA_SIZE)+/*
- Serial Driver
- */
+#define CONFIG_SYS_LPC32XX_UART 2 /* UART2 */ +#define CONFIG_BAUDRATE 115200
+/*
- NOR Flash
- */
+#define CONFIG_CMD_FLASH +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_BASE EMC_CS0_BASE +#define CONFIG_SYS_FLASH_SIZE SZ_4M +#define CONFIG_SYS_FLASH_CFI
+/*
- U-Boot General Configurations
- */
+#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION
+#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE SZ_128K
+/*
- U-Boot Commands
- */
+#include <config_cmd_default.h> +#define CONFIG_CMD_CACHE
+/*
- Boot Linux
- */
+#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyS2,115200n8" +#define CONFIG_LOADADDR 0x80008000
+/*
- Include SoC specific configuration
- */
+#include <asm/arch/config.h>
+#endif /* __CONFIG_DEVKIT3250_H__*/