When a USB Ethernet device is detected and registered there is no way to know the device-name in order to use it with the ethact env variable.
Add a print to display the device name that is registered.
Example using an AX88x72A USB Ethernet device:
GW6404-B> usb start starting USB... Bus xhci_pci: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 Bus xhci_pci: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus xhci_pci for devices... found ethernet device: asix_eth
GW6404-B> setenv ethact asix_eth # select usb ethernet
Signed-off-by: Tim Harvey tharvey@gateworks.com --- drivers/usb/eth/usb_ether.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c index e368ecda0d..916c4e1c85 100644 --- a/drivers/usb/eth/usb_ether.c +++ b/drivers/usb/eth/usb_ether.c @@ -86,6 +86,7 @@ int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize) return ret; } ueth->pusb_dev = udev; + printf("\n found ethernet device: %s\n", dev->name);
return 0; }