CONFIG_SPL_NET_VCI_STRING is available only with BOOTP. So if CMD_DHCP is enabled for SPL in usb ether boot, it will not pass the right vendor name and failing to download the right file. Also all the net CMD_* are not required in SPL builds. So defining these only for non-SPL builds.
Reported-by: Yan Liu yan-liu@ti.com Signed-off-by: Lokesh Vutla lokeshvutla@ti.com Reviewed-by: Sekhar Nori nsekhar@ti.com --- include/configs/ti_am335x_common.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index edbd820..4535b8c 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -28,6 +28,7 @@ #endif #define CONFIG_SYS_NS16550_CLK 48000000
+#ifndef CONFIG_SPL_BUILD /* Network defines. */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII @@ -38,9 +39,10 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_CMD_PING -#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ +#endif
+#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ /* * RTC related defines. To use bootcount you must set bootlimit in the * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT