On Mon, May 14, 2012 at 09:45:58AM -0700, Tom Rini wrote:
On Sat, May 05, 2012 at 08:32:50AM +0200, Heiko Schocher wrote:
change gpio pin settings:
- gpio pin 6[13] (PLC reset) default value low
- gpio pin 6[0] (TPM reset) default value low
- 4 new GPIO pins pin i/o name
- 3[9] input Board Type
- 2[7] input HW-ID0
- 2[6] input HW-ID1
- 2[3] input HW-ID2
read board type and hw id from gpio pins on the enbw_cmc board, and use board type for setting up different gpio pin settings.
do not pass "davinci_mmc.use_dma=0" to linux, as MMC now works with DMA.
update logbuf support: store post word in RTC scratch register
add support for configuring KSZ8864RMN switch through a config file on u-boot startup. For more infos see: doc/README.switch_config
Signed-off-by: Heiko Schocher hs@denx.de Cc: Wolfgang Denk wd@denx.de Cc: Tom Rini tom.rini@gmail.com Cc: Christian Riesch christian.riesch@omicron.at Cc: Sandeep Paulraj s-paulraj@ti.com
Applied to u-boot-ti/master, thanks.
I take that back, sorry. With ELDK4.1 toolchain: Configuring for enbw_cmc board... enbw_cmc.c: In function 'enbw_cmc_getvalue': enbw_cmc.c:447: warning: dereferencing type-punned pointer will break strict-aliasing rules text data bss dec hex filename 429329 8436 262084 699849 aadc9 eldk42/u-boot