-----Original Message----- From: York Sun Sent: Tuesday, January 09, 2018 1:10 AM To: Bhaskar Upadhaya bhaskar.upadhaya@nxp.com; u-boot@lists.denx.de Subject: Re: [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support
On 11/29/2017 09:13 PM, Bhaskar Upadhaya wrote:
LS1012A-2G5RDB belongs to LS1012A family with features 2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART
Signed-off-by: Bhaskar Upadhaya Bhaskar.Upadhaya@nxp.com
changes for v3:
- remove pfe driver changes from this patch 2. remove PCIe, DSPI
from ls1012a2g5rdb_qspi_defconfig
<snip>
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c index 41283db..9675335 100644 --- a/board/freescale/ls1012ardb/ls1012ardb.c +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR;
int checkboard(void) { +#ifdef CONFIG_TARGET_LS1012ARDB u8 in1;
puts("Board: LS1012ARDB "); @@ -57,6 +58,9 @@ int checkboard(void) puts(": bank2\n"); else puts("unknown\n"); +#else
- puts("Board: LS1012A2G5RDB ");
+#endif
return 0; } @@ -148,10 +152,12 @@ int esdhc_status_fixup(void *blob, const char
*compat)
* 10 - eMMC Memory * 11 - SPI */+#ifdef CONFIG_TARGET_LS1012ARDB if (i2c_read(I2C_MUX_IO1_ADDR, 0, 1, &io, 1) < 0) { printf("Error reading i2c boot information!\n"); return 0; /* Don't want to hang() on this error */ } +#endif
mux_sdhc2 = (io & 0x0c) >> 2; /* Enable SDHC2 only when use SDIO wifi and eMMC */
Bhaskar,
Please double check changes to this file. I am seeing compiling errors related to I2C_MUX_IO_ADDR, I2C_MUX_IO_1, SW_REV_MASK, SW_REV_D for ls1012a2g5rdb_qspi on top of master branch.
York
York, This patch needs to be re spin because it modifies file " board/freescale/ls1012ardb/eth.c " which is introduced by PFE patch set which are still under discussion. So will send another rev of this patch which will remove the file "board/freescale/ls1012ardb/eth.c "