Add a driver for setting up and modifying the various PLLs and peripheral clocks on the RK3288.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
arch/arm/include/asm/arch-rockchip/cru_rk3288.h | 185 +++++++ drivers/clk/Makefile | 1 + drivers/clk/clk_rk3288.c | 618 ++++++++++++++++++++++++ 3 files changed, 804 insertions(+) create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3288.h create mode 100644 drivers/clk/clk_rk3288.c
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h new file mode 100644 index 0000000..7ebcc40 --- /dev/null +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h @@ -0,0 +1,185 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * (C) Copyright 2008-2014 Rockchip Electronics + * Peter, Software Engineering, superpeter.cai@gmail.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _ASM_ARCH_CRU_RK3288_H +#define _ASM_ARCH_CRU_RK3288_H + +#define OSC_HZ (24 * 1000 * 1000) + +#define APLL_HZ (1800 * 1000000) +#define GPLL_HZ (594 * 1000000) +#define CPLL_HZ (384 * 1000000) +#define NPLL_HZ (384 * 1000000) + +/* The SRAM is clocked off aclk_bus, so we want to max it out for boot speed */ +#define PD_BUS_ACLK_HZ 297000000 +#define PD_BUS_HCLK_HZ 148500000 +#define PD_BUS_PCLK_HZ 74250000 + +#define PERI_ACLK_HZ 148500000 +#define PERI_HCLK_HZ 148500000 +#define PERI_PCLK_HZ 74250000 + +struct rk3288_cru { + struct rk3288_pll { + u32 con0; + u32 con1; + u32 con2; + u32 con3; + } pll[5]; + u32 cru_mode_con; + u32 reserved0[3]; + u32 cru_clksel_con[43]; + u32 reserved1[21]; + u32 cru_clkgate_con[19]; + u32 reserved2; + u32 cru_glb_srst_fst_value; + u32 cru_glb_srst_snd_value; + u32 cru_softrst_con[12]; + u32 cru_misc_con; + u32 cru_glb_cnt_th; + u32 cru_glb_rst_con; + u32 reserved3; + u32 cru_glb_rst_st; + u32 reserved4; + u32 cru_sdmmc_con[2]; + u32 cru_sdio0_con[2]; + u32 cru_sdio1_con[2]; + u32 cru_emmc_con[2]; +}; +check_member(rk3288_cru, cru_emmc_con[1], 0x021c); + +/* CRU_CLKSEL11_CON */ +enum { + HSICPHY_DIV_SHIFT = 8, + HSICPHY_DIV_MASK = 0x3f, + + MMC0_PLL_SHIFT = 6, + MMC0_PLL_MASK = 3, + MMC0_PLL_SELECT_CODEC = 0, + MMC0_PLL_SELECT_GENERAL, + MMC0_PLL_SELECT_24MHZ, + + MMC0_DIV_SHIFT = 0, + MMC0_DIV_MASK = 0x3f, +}; + +/* CRU_CLKSEL12_CON */ +enum { + EMMC_PLL_SHIFT = 0xe, + EMMC_PLL_MASK = 3, + EMMC_PLL_SELECT_CODEC = 0, + EMMC_PLL_SELECT_GENERAL, + EMMC_PLL_SELECT_24MHZ, + + EMMC_DIV_SHIFT = 8, + EMMC_DIV_MASK = 0x3f, + + SDIO0_PLL_SHIFT = 6, + SDIO0_PLL_MASK = 3, + SDIO0_PLL_SELECT_CODEC = 0, + SDIO0_PLL_SELECT_GENERAL, + SDIO0_PLL_SELECT_24MHZ, + + SDIO0_DIV_SHIFT = 0, + SDIO0_DIV_MASK = 0x3f, +}; + +/* CRU_CLKSEL25_CON */ +enum { + SPI1_PLL_SHIFT = 0xf, + SPI1_PLL_MASK = 1, + SPI1_PLL_SELECT_CODEC = 0, + SPI1_PLL_SELECT_GENERAL, + + SPI1_DIV_SHIFT = 8, + SPI1_DIV_MASK = 0x7f, + + SPI0_PLL_SHIFT = 7, + SPI0_PLL_MASK = 1, + SPI0_PLL_SELECT_CODEC = 0, + SPI0_PLL_SELECT_GENERAL, + + SPI0_DIV_SHIFT = 0, + SPI0_DIV_MASK = 0x7f, +}; + +/* CRU_CLKSEL39_CON */ +enum { + ACLK_HEVC_PLL_SHIFT = 0xe, + ACLK_HEVC_PLL_MASK = 3, + ACLK_HEVC_PLL_SELECT_CODEC = 0, + ACLK_HEVC_PLL_SELECT_GENERAL, + ACLK_HEVC_PLL_SELECT_NEW, + + ACLK_HEVC_DIV_SHIFT = 8, + ACLK_HEVC_DIV_MASK = 0x1f, + + SPI2_PLL_SHIFT = 7, + SPI2_PLL_MASK = 1, + SPI2_PLL_SELECT_CODEC = 0, + SPI2_PLL_SELECT_GENERAL, + + SPI2_DIV_SHIFT = 0, + SPI2_DIV_MASK = 0x7f, +}; + +/* CRU_MODE_CON */ +enum { + NPLL_WORK_SHIFT = 0xe, + NPLL_WORK_MASK = 3, + NPLL_WORK_SLOW = 0, + NPLL_WORK_NORMAL, + NPLL_WORK_DEEP, + + GPLL_WORK_SHIFT = 0xc, + GPLL_WORK_MASK = 3, + GPLL_WORK_SLOW = 0, + GPLL_WORK_NORMAL, + GPLL_WORK_DEEP, + + CPLL_WORK_SHIFT = 8, + CPLL_WORK_MASK = 3, + CPLL_WORK_SLOW = 0, + CPLL_WORK_NORMAL, + CPLL_WORK_DEEP, + + DPLL_WORK_SHIFT = 4, + DPLL_WORK_MASK = 3, + DPLL_WORK_SLOW = 0, + DPLL_WORK_NORMAL, + DPLL_WORK_DEEP, + + APLL_WORK_SHIFT = 0, + APLL_WORK_MASK = 3, + APLL_WORK_SLOW = 0, + APLL_WORK_NORMAL, + APLL_WORK_DEEP, +}; + +/* CRU_APLL_CON0 */ +enum { + CLKR_SHIFT = 8, + CLKR_MASK = 0x3f, + + CLKOD_SHIFT = 0, + CLKOD_MASK = 0xf, +}; + +/* CRU_APLL_CON1 */ +enum { + LOCK_SHIFT = 0x1f, + LOCK_MASK = 1, + LOCK_UNLOCK = 0, + LOCK_LOCK, + + CLKF_SHIFT = 0, + CLKF_MASK = 0x1fff, +}; + +#endif diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index b51cf23..f65bdb2 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -6,3 +6,4 @@ #
obj-$(CONFIG_CLK) += clk-uclass.o +obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o diff --git a/drivers/clk/clk_rk3288.c b/drivers/clk/clk_rk3288.c new file mode 100644 index 0000000..54d4930 --- /dev/null +++ b/drivers/clk/clk_rk3288.c @@ -0,0 +1,618 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <errno.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/cru_rk3288.h> +#include <asm/arch/grf_rk3288.h> +#include <asm/arch/hardware.h> +#include <asm/arch/periph.h> +#include <dm/lists.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct rk3288_clk_plat { + enum rk_clk_id clk_id; +}; + +struct rk3288_clk_priv { + struct rk3288_grf *grf; + struct rk3288_cru *cru; + ulong rate; +}; + +struct pll_div { + u32 nr; + u32 nf; + u32 no; +}; + +enum { + VCO_MAX_HZ = 2200U * 1000000, + VCO_MIN_HZ = 440 * 1000000, + OUTPUT_MAX_HZ = 2200U * 1000000, + OUTPUT_MIN_HZ = 27500000, + FREF_MAX_HZ = 2200U * 1000000, + FREF_MIN_HZ = 269 * 1000000, +}; + +enum { + /* PLL CON0 */ + PLL_OD_MASK = 0x0f, + + /* PLL CON1 */ + PLL_NF_MASK = 0x1fff, + + /* PLL CON2 */ + PLL_BWADJ_MASK = 0x0fff, + + /* PLL CON3 */ + PLL_RESET_SHIFT = 5, + + /* CLKSEL1: pd bus clk pll sel: codec or general */ + PD_BUS_SEL_PLL_MASK = 15, + PD_BUS_SEL_CPLL = 0, + PD_BUS_SEL_GPLL, + + /* pd bus pclk div: pclk = pd_bus_aclk /(div + 1) */ + PD_BUS_PCLK_DIV_SHIFT = 12, + PD_BUS_PCLK_DIV_MASK = 7, + + /* pd bus hclk div: aclk_bus: hclk_bus = 1:1 or 2:1 or 4:1 */ + PD_BUS_HCLK_DIV_SHIFT = 8, + PD_BUS_HCLK_DIV_MASK = 3, + + /* pd bus aclk div: pd_bus_aclk = pd_bus_src_clk /(div0 * div1) */ + PD_BUS_ACLK_DIV0_SHIFT = 3, + PD_BUS_ACLK_DIV0_MASK = 0x1f, + PD_BUS_ACLK_DIV1_SHIFT = 0, + PD_BUS_ACLK_DIV1_MASK = 0x7, + + /* + * CLKSEL10 + * peripheral bus pclk div: + * aclk_bus: pclk_bus = 1:1 or 2:1 or 4:1 or 8:1 + */ + PERI_PCLK_DIV_SHIFT = 12, + PERI_PCLK_DIV_MASK = 7, + + /* peripheral bus hclk div: aclk_bus: hclk_bus = 1:1 or 2:1 or 4:1 */ + PERI_HCLK_DIV_SHIFT = 8, + PERI_HCLK_DIV_MASK = 3, + + /* + * peripheral bus aclk div: + * aclk_periph = periph_clk_src / (peri_aclk_div_con + 1) + */ + PERI_ACLK_DIV_SHIFT = 0, + PERI_ACLK_DIV_MASK = 0x1f, + + /* CLKSEL37 */ + DPLL_MODE_MASK = 0x3, + DPLL_MODE_SHIFT = 4, + DPLL_MODE_SLOW = 0, + DPLL_MODE_NORM, + + CPLL_MODE_MASK = 3, + CPLL_MODE_SHIFT = 8, + CPLL_MODE_SLOW = 0, + CPLL_MODE_NORM, + + GPLL_MODE_MASK = 3, + GPLL_MODE_SHIFT = 12, + GPLL_MODE_SLOW = 0, + GPLL_MODE_NORM, + + NPLL_MODE_MASK = 3, + NPLL_MODE_SHIFT = 14, + NPLL_MODE_SLOW = 0, + NPLL_MODE_NORM, + + SOCSTS_DPLL_LOCK = 1 << 5, + SOCSTS_APLL_LOCK = 1 << 6, + SOCSTS_CPLL_LOCK = 1 << 7, + SOCSTS_GPLL_LOCK = 1 << 8, + SOCSTS_NPLL_LOCK = 1 << 9, +}; + +#define RATE_TO_DIV(input_rate, output_rate) \ + ((input_rate) / (output_rate) - 1); + +#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) + +#define PLL_DIVISORS(hz, _nr, _no) {\ + .nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no};\ + _Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\ + (_nr * _no) == hz, #hz "Hz cannot be hit with PLL "\ + "divisors on line " __stringify(__LINE__)); + +/* Keep divisors as low as possible to reduce jitter and power usage */ +static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 1); +static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2); +static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2); + +static int rkclk_set_pll(struct rk3288_cru *cru, enum rk_clk_id clk_id, + const struct pll_div *div) +{ + int pll_id = rk_pll_id(clk_id); + struct rk3288_pll *pll = &cru->pll[pll_id]; + /* All PLLs have same VCO and output frequency range restrictions. */ + uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000; + uint output_hz = vco_hz / div->no; + + debug("PLL at %p: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n", + pll, div->nf, div->nr, div->no, vco_hz, output_hz); + assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ && + output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ && + (div->no == 1 || !(div->no % 2))); + + /* enter rest */ + rk_setreg(&pll->con3, 1 << PLL_RESET_SHIFT); + + rk_clrsetreg(&pll->con0, + CLKR_MASK << CLKR_SHIFT | PLL_OD_MASK, + ((div->nr - 1) << CLKR_SHIFT) | (div->no - 1)); + rk_clrsetreg(&pll->con1, CLKF_MASK, div->nf - 1); + rk_clrsetreg(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1); + + udelay(10); + + /* return form rest */ + rk_clrreg(&pll->con3, 1 << PLL_RESET_SHIFT); + + return 0; +} + +static inline unsigned int log2(unsigned int value) +{ + return fls(value) - 1; +} + +static int rkclk_configure_ddr(struct rk3288_cru *cru, struct rk3288_grf *grf, + unsigned int hz) +{ + static const struct pll_div dpll_cfg[] = { + {.nf = 25, .nr = 2, .no = 1}, + {.nf = 400, .nr = 9, .no = 2}, + {.nf = 500, .nr = 9, .no = 2}, + {.nf = 100, .nr = 3, .no = 1}, + }; + int cfg; + + debug("%s: cru=%p, grf=%p, hz=%u\n", __func__, cru, grf, hz); + switch (hz) { + case 300000000: + cfg = 0; + break; + case 533000000: /* actually 533.3P MHz */ + cfg = 1; + break; + case 666000000: /* actually 666.6P MHz */ + cfg = 2; + break; + case 800000000: + cfg = 3; + break; + default: + debug("Unsupported SDRAM frequency, add to clock.c!"); + return -EINVAL; + } + + /* pll enter slow-mode */ + rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT, + DPLL_MODE_SLOW << DPLL_MODE_SHIFT); + + rkclk_set_pll(cru, CLK_DDR, &dpll_cfg[cfg]); + + /* wait for pll lock */ + while (!(readl(&grf->soc_status[1]) & SOCSTS_DPLL_LOCK)) + udelay(1); + + /* PLL enter normal-mode */ + rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT, + DPLL_MODE_NORM << DPLL_MODE_SHIFT); + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +static void rkclk_init(struct rk3288_cru *cru, struct rk3288_grf *grf) +{ + u32 aclk_div; + u32 hclk_div; + u32 pclk_div; + + /* pll enter slow-mode */ + rk_clrsetreg(&cru->cru_mode_con, + GPLL_MODE_MASK << GPLL_MODE_SHIFT | + CPLL_MODE_MASK << CPLL_MODE_SHIFT, + GPLL_MODE_SLOW << GPLL_MODE_SHIFT | + CPLL_MODE_SLOW << CPLL_MODE_SHIFT); + + /* init pll */ + rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg); + rkclk_set_pll(cru, CLK_CODEC, &cpll_init_cfg); + + /* waiting for pll lock */ + while ((readl(&grf->soc_status[1]) & + (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) != + (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) + udelay(1); + + /* + * pd_bus clock pll source selection and + * set up dependent divisors for PCLK/HCLK and ACLK clocks. + */ + aclk_div = GPLL_HZ / PD_BUS_ACLK_HZ - 1; + assert((aclk_div + 1) * PD_BUS_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); + hclk_div = PD_BUS_ACLK_HZ / PD_BUS_HCLK_HZ - 1; + assert((hclk_div + 1) * PD_BUS_HCLK_HZ == + PD_BUS_ACLK_HZ && (hclk_div < 0x4) && (hclk_div != 0x2)); + + pclk_div = PD_BUS_ACLK_HZ / PD_BUS_PCLK_HZ - 1; + assert((pclk_div + 1) * PD_BUS_PCLK_HZ == + PD_BUS_ACLK_HZ && pclk_div < 0x7); + + rk_clrsetreg(&cru->cru_clksel_con[1], + PD_BUS_PCLK_DIV_MASK << PD_BUS_PCLK_DIV_SHIFT | + PD_BUS_HCLK_DIV_MASK << PD_BUS_HCLK_DIV_SHIFT | + PD_BUS_ACLK_DIV0_MASK << PD_BUS_ACLK_DIV0_SHIFT | + PD_BUS_ACLK_DIV1_MASK << PD_BUS_ACLK_DIV1_SHIFT, + pclk_div << PD_BUS_PCLK_DIV_SHIFT | + hclk_div << PD_BUS_HCLK_DIV_SHIFT | + aclk_div << PD_BUS_ACLK_DIV0_SHIFT | + 0 << 0); + + /* + * peri clock pll source selection and + * set up dependent divisors for PCLK/HCLK and ACLK clocks. + */ + aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1; + assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); + + hclk_div = log2(PERI_ACLK_HZ / PERI_HCLK_HZ); + assert((1 << hclk_div) * PERI_HCLK_HZ == + PERI_ACLK_HZ && (hclk_div < 0x4)); + + pclk_div = log2(PERI_ACLK_HZ / PERI_PCLK_HZ); + assert((1 << pclk_div) * PERI_PCLK_HZ == + PERI_ACLK_HZ && (pclk_div < 0x4)); + + rk_clrsetreg(&cru->cru_clksel_con[10], + PERI_PCLK_DIV_MASK << PERI_PCLK_DIV_SHIFT | + PERI_HCLK_DIV_MASK << PERI_HCLK_DIV_SHIFT | + PERI_ACLK_DIV_MASK << PERI_ACLK_DIV_SHIFT, + pclk_div << PERI_PCLK_DIV_SHIFT | + hclk_div << PERI_HCLK_DIV_SHIFT | + aclk_div << PERI_ACLK_DIV_SHIFT); + + /* PLL enter normal-mode */ + rk_clrsetreg(&cru->cru_mode_con, + GPLL_MODE_MASK << GPLL_MODE_SHIFT | + CPLL_MODE_MASK << CPLL_MODE_SHIFT, + GPLL_MODE_NORM << GPLL_MODE_SHIFT | + GPLL_MODE_NORM << CPLL_MODE_SHIFT); +} +#endif + +/* Get pll rate by id */ +static uint32_t rkclk_pll_get_rate(struct rk3288_cru *cru, + enum rk_clk_id clk_id) +{ + uint32_t nr, no, nf; + uint32_t con; + int pll_id = rk_pll_id(clk_id); + struct rk3288_pll *pll = &cru->pll[pll_id]; + static u8 clk_shift[CLK_COUNT] = { + 0xff, APLL_WORK_SHIFT, DPLL_WORK_SHIFT, CPLL_WORK_SHIFT, + GPLL_WORK_SHIFT, NPLL_WORK_SHIFT + }; + uint shift; + + con = readl(&cru->cru_mode_con); + shift = clk_shift[clk_id]; + switch ((con >> shift) & APLL_WORK_MASK) { + case APLL_WORK_SLOW: + return OSC_HZ; + case APLL_WORK_NORMAL: + /* normal mode */ + con = readl(&pll->con0); + no = ((con >> CLKOD_SHIFT) & CLKOD_MASK) + 1; + nr = ((con >> CLKR_SHIFT) & CLKR_MASK) + 1; + con = readl(&pll->con1); + nf = ((con >> CLKF_SHIFT) & CLKF_MASK) + 1; + + return (24 * nf / (nr * no)) * 1000000; + case APLL_WORK_DEEP: + default: + return 32768; + } +} + +static ulong rk3288_clk_get_rate(struct udevice *dev) +{ + struct rk3288_clk_plat *plat = dev_get_platdata(dev); + struct rk3288_clk_priv *priv = dev_get_priv(dev); + + debug("%s\n", dev->name); + return rkclk_pll_get_rate(priv->cru, plat->clk_id); +} + +static ulong rk3288_clk_set_rate(struct udevice *dev, ulong rate) +{ + struct rk3288_clk_plat *plat = dev_get_platdata(dev); + struct rk3288_clk_priv *priv = dev_get_priv(dev); + + debug("%s\n", dev->name); + switch (plat->clk_id) { + case CLK_DDR: + rkclk_configure_ddr(priv->cru, priv->grf, rate); + break; + default: + return -ENOENT; + } + + return 0; +} + +static ulong rockchip_mmc_get_clk(struct rk3288_cru *cru, uint clk_general_rate, + enum periph_id periph) +{ + uint src_rate; + uint div, mux; + u32 con; + + switch (periph) { + case PERIPH_ID_EMMC: + con = readl(&cru->cru_clksel_con[12]); + mux = (con >> EMMC_PLL_SHIFT) & EMMC_PLL_MASK; + div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK; + break; + case PERIPH_ID_SDCARD: + con = readl(&cru->cru_clksel_con[12]); + mux = (con >> MMC0_PLL_SHIFT) & MMC0_PLL_MASK; + div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK; + break; + case PERIPH_ID_SDMMC2: + con = readl(&cru->cru_clksel_con[12]); + mux = (con >> SDIO0_PLL_SHIFT) & SDIO0_PLL_MASK; + div = (con >> SDIO0_DIV_SHIFT) & SDIO0_DIV_MASK; + break; + default: + return -EINVAL; + } + + src_rate = mux == EMMC_PLL_SELECT_24MHZ ? OSC_HZ : clk_general_rate; + return DIV_TO_RATE(src_rate, div); +} + +static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint clk_general_rate, + enum periph_id periph, uint freq) +{ + int src_clk_div; + int mux; + + debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate); + src_clk_div = RATE_TO_DIV(clk_general_rate, freq); + + if (src_clk_div > 0x3f) { + src_clk_div = RATE_TO_DIV(OSC_HZ, freq); + mux = EMMC_PLL_SELECT_24MHZ; + assert((int)EMMC_PLL_SELECT_24MHZ == + (int)MMC0_PLL_SELECT_24MHZ); + } else { + mux = EMMC_PLL_SELECT_GENERAL; + assert((int)EMMC_PLL_SELECT_GENERAL == + (int)MMC0_PLL_SELECT_GENERAL); + } + switch (periph) { + case PERIPH_ID_EMMC: + rk_clrsetreg(&cru->cru_clksel_con[12], + EMMC_PLL_MASK << EMMC_PLL_SHIFT | + EMMC_DIV_MASK << EMMC_DIV_SHIFT, + mux << EMMC_PLL_SHIFT | + (src_clk_div - 1) << EMMC_DIV_SHIFT); + break; + case PERIPH_ID_SDCARD: + rk_clrsetreg(&cru->cru_clksel_con[11], + MMC0_PLL_MASK << MMC0_PLL_SHIFT | + MMC0_DIV_MASK << MMC0_DIV_SHIFT, + mux << MMC0_PLL_SHIFT | + (src_clk_div - 1) << MMC0_DIV_SHIFT); + break; + case PERIPH_ID_SDMMC2: + rk_clrsetreg(&cru->cru_clksel_con[12], + SDIO0_PLL_MASK << SDIO0_PLL_SHIFT | + SDIO0_DIV_MASK << SDIO0_DIV_SHIFT, + mux << SDIO0_PLL_SHIFT | + (src_clk_div - 1) << SDIO0_DIV_SHIFT); + break; + default: + return -EINVAL; + } + + return rockchip_mmc_get_clk(cru, clk_general_rate, periph); +} + +static ulong rockchip_spi_get_clk(struct rk3288_cru *cru, uint clk_general_rate, + enum periph_id periph) +{ + uint div, mux; + u32 con; + + switch (periph) { + case PERIPH_ID_SPI0: + con = readl(&cru->cru_clksel_con[25]); + mux = (con >> SPI0_PLL_SHIFT) & SPI0_PLL_MASK; + div = (con >> SPI0_DIV_SHIFT) & SPI0_DIV_MASK; + break; + case PERIPH_ID_SPI1: + con = readl(&cru->cru_clksel_con[25]); + mux = (con >> SPI1_PLL_SHIFT) & SPI1_PLL_MASK; + div = (con >> SPI1_DIV_SHIFT) & SPI1_DIV_MASK; + break; + case PERIPH_ID_SPI2: + con = readl(&cru->cru_clksel_con[39]); + mux = (con >> SPI2_PLL_SHIFT) & SPI2_PLL_MASK; + div = (con >> SPI2_DIV_SHIFT) & SPI2_DIV_MASK; + break; + default: + return -EINVAL; + } + assert(mux == SPI0_PLL_SELECT_GENERAL); + + return DIV_TO_RATE(clk_general_rate, div); +} + +static ulong rockchip_spi_set_clk(struct rk3288_cru *cru, uint clk_general_rate, + enum periph_id periph, uint freq) +{ + int src_clk_div; + + debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate); + src_clk_div = RATE_TO_DIV(clk_general_rate, freq); + switch (periph) { + case PERIPH_ID_SPI0: + rk_clrsetreg(&cru->cru_clksel_con[25], + SPI0_PLL_MASK << SPI0_PLL_SHIFT | + SPI0_DIV_MASK << SPI0_DIV_SHIFT, + SPI0_PLL_SELECT_GENERAL << SPI0_PLL_SHIFT | + src_clk_div << SPI0_DIV_SHIFT); + break; + case PERIPH_ID_SPI1: + rk_clrsetreg(&cru->cru_clksel_con[25], + SPI1_PLL_MASK << SPI1_PLL_SHIFT | + SPI1_DIV_MASK << SPI1_DIV_SHIFT, + SPI1_PLL_SELECT_GENERAL << SPI1_PLL_SHIFT | + src_clk_div << SPI1_DIV_SHIFT); + break; + case PERIPH_ID_SPI2: + rk_clrsetreg(&cru->cru_clksel_con[39], + SPI2_PLL_MASK << SPI2_PLL_SHIFT | + SPI2_DIV_MASK << SPI2_DIV_SHIFT, + SPI2_PLL_SELECT_GENERAL << SPI2_PLL_SHIFT | + src_clk_div << SPI2_DIV_SHIFT); + break; + default: + return -EINVAL; + } + + return rockchip_spi_get_clk(cru, clk_general_rate, periph); +} + +ulong rk3288_set_periph_rate(struct udevice *dev, int periph, ulong rate) +{ + struct rk3288_clk_priv *priv = dev_get_priv(dev); + ulong new_rate; + + switch (periph) { + case PERIPH_ID_EMMC: + case PERIPH_ID_SDCARD: + new_rate = rockchip_mmc_set_clk(priv->cru, clk_get_rate(dev), + periph, rate); + break; + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + case PERIPH_ID_SPI2: + new_rate = rockchip_spi_set_clk(priv->cru, clk_get_rate(dev), + periph, rate); + break; + default: + return -ENOENT; + } + + return new_rate; +} + +static struct clk_ops rk3288_clk_ops = { + .get_rate = rk3288_clk_get_rate, + .set_rate = rk3288_clk_set_rate, + .set_periph_rate = rk3288_set_periph_rate, +}; + +static int rk3288_clk_probe(struct udevice *dev) +{ + struct rk3288_clk_plat *plat = dev_get_platdata(dev); + struct rk3288_clk_priv *priv = dev_get_priv(dev); + + if (plat->clk_id != CLK_OSC) { + struct rk3288_clk_priv *parent_priv = dev_get_priv(dev->parent); + + priv->cru = parent_priv->cru; + priv->grf = parent_priv->grf; + return 0; + } + priv->cru = (struct rk3288_cru *)dev_get_addr(dev); + priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); +#ifdef CONFIG_SPL_BUILD + rkclk_init(priv->cru, priv->grf); +#endif + + return 0; +} + +static const char *const clk_name[CLK_COUNT] = { + "osc", + "apll", + "dpll", + "cpll", + "gpll", + "mpll", +}; + +static int rk3288_clk_bind(struct udevice *dev) +{ + struct rk3288_clk_plat *plat = dev_get_platdata(dev); + int pll, ret; + + /* We only need to set up the root clock */ + if (dev->of_offset == -1) { + plat->clk_id = CLK_OSC; + return 0; + } + + /* Create devices for P main clocks */ + for (pll = 1; pll < CLK_COUNT; pll++) { + struct udevice *child; + struct rk3288_clk_plat *cplat; + + debug("%s %s\n", __func__, clk_name[pll]); + ret = device_bind_driver(dev, "clk_rk3288", clk_name[pll], + &child); + if (ret) + return ret; + cplat = dev_get_platdata(child); + cplat->clk_id = pll; + } + + /* The reset driver does not have a device node, so bind it here */ + ret = device_bind_driver(gd->dm_root, "rk3288_reset", "reset", &dev); + if (ret) + debug("Warning: No RK3288 reset driver: ret=%d\n", ret); + + return 0; +} + +static const struct udevice_id rk3288_clk_ids[] = { + { .compatible = "rockchip,rk3288-cru" }, + { } +}; + +U_BOOT_DRIVER(clk_rk3288) = { + .name = "clk_rk3288", + .id = UCLASS_CLK, + .of_match = rk3288_clk_ids, + .priv_auto_alloc_size = sizeof(struct rk3288_clk_priv), + .platdata_auto_alloc_size = sizeof(struct rk3288_clk_plat), + .ops = &rk3288_clk_ops, + .bind = rk3288_clk_bind, + .probe = rk3288_clk_probe, +};