From: Michal Simek michal.simek@xilinx.com
doc/uImage.FIT/overlay-fdt-boot.txt is describing how to create FIT image with DT overlays in it. Add support for this feature to SPL.
Here is the ZynqMP fragment where dtb points to full DT and dtbo is overlay which should be applied on the top of dtb. config { description = "ATF with full u-boot overlay"; firmware = "atf"; loadables = "uboot"; fdt = "dtb", "dtbo"; };
The whole feature depends on OF_LIBFDT_OVERLAY which is adding +4kB code and 0 for platforms which are not enabling this feature.
Signed-off-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com Reviewed-by: Simon Glass sjg@chromium.org
---
Changes in v5: None Changes in v4: - use CONFIG_IS_ENABLED() instead of #idef
Changes in v3: - Add a new config option: SPL_LOAD_FIT_APPLY_OVERLAY. By default, it is not selected.
Changes in v2: None
Kconfig | 9 +++++++++ common/spl/spl_fit.c | 30 +++++++++++++++++++++++++++--- 2 files changed, 36 insertions(+), 3 deletions(-)
diff --git a/Kconfig b/Kconfig index 1f0904f704..825f096807 100644 --- a/Kconfig +++ b/Kconfig @@ -428,6 +428,15 @@ config SPL_LOAD_FIT particular it can handle selecting from multiple device tree and passing the correct one to U-Boot.
+config SPL_LOAD_FIT_APPLY_OVERLAY + bool "Enable SPL applying DT overlays from FIT" + depends on SPL_LOAD_FIT + select OF_LIBFDT_OVERLAY + help + The device tree is loaded from the FIT image. Allow the SPL is to + also load device-tree overlays from the FIT image an apply them + over the device tree. + config SPL_LOAD_FIT_FULL bool "Enable SPL loading U-Boot as a FIT (full fitImage features)" select SPL_FIT diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index ee037134a8..569110f3ac 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -281,7 +281,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, void *fit, int images, ulong base_offset) { struct spl_image_info image_info; - int node, ret = 0; + int node, ret = 0, index = 0;
/* * Use the address following the image as target address for the @@ -290,7 +290,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, image_info.load_addr = spl_image->load_addr + spl_image->size;
/* Figure out which device tree the board wants to use */ - node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0); + node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, index++); if (node < 0) { debug("%s: cannot find FDT node\n", __func__);
@@ -315,8 +315,32 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, #if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY) /* Try to make space, so we can inject details on the loadables */ ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192); + if (ret < 0) + return ret; #endif - + if (CONFIG_IS_ENABLED(LOAD_FIT_APPLY_OVERLAY)) { + for (; ; index++) { + node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, + index); + if (node < 0) { + debug("%s: No additional FDT node\n", __func__); + return 0; + } + + ret = spl_load_fit_image(info, sector, fit, base_offset, + node, &image_info); + if (ret < 0) + return ret; + + ret = fdt_overlay_apply_verbose(spl_image->fdt_addr, + (void *)image_info.load_addr); + if (ret) + return ret; + + debug("%s: DT overlay %s applied\n", __func__, + fit_get_name(fit, node, NULL)); + } + } return ret; }