On Tue, Dec 13, 2011 at 01:06:10PM -0200, Fabio Estevam wrote:
Jason/Dirk,
On Tue, Dec 13, 2011 at 11:30 AM, Jason Liu jason.hui@linaro.org wrote:
Add the initial support for Freescale i.MX6Q Sabre Lite board
Signed-off-by: Dirk Behme dirk.behme@de.bosch.com Signed-off-by: Jason Liu jason.hui@linaro.org
V2: change the default script to let linaro image boot, and also change the default env to dev 0, which is normal SD slot, not the Micro-SD slot
This is what I get on my sabrelite:
U-Boot 2011.12-rc1-00004-g06e42c6-dirty (Dec 13 2011 - 12:58:29)
CPU: Freescale i.MX61 family rev1.0 at 792 MHz Reset cause: unknown reset Board: MX6Q-Sabre Lite DRAM: 1 GiB WARNING: Caches not enabled MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
(and then U-boot prompt never shows up).
The FSL version of U-boot boots fine on my board,
I got the same problem on arm2 board, and just figured it out. The cause seems a little absurd to me. The following patch got missed from the beginning when the imx6q series got applied.
[PATCH V3 4/5] i.mx: fsl_esdhc: add the i.mx6q support
Applying the patch solves the problem for me.