With HDMI output for the RK3399 working, this update the RK3399-Q7 (Puma) defconfig for the new functionality: 1. enables PMIC command (to check if the HDMI voltages are correct) +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y 2. enables video-output (via HDMI) +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y 3. turns on the 'dcache'-command (for a dcache flush) for our QA to fill the framebuffer using 'mw.l' +CONFIG_CMD_CACHE=y 4. turns on the 'bmp'-command +CONFIG_CMD_BMP=y
Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com Reviewed-by: Simon Glass sjg@chromium.org
---
Changes in v3: None Changes in v2: - enable CMD_BMP in the puma-rk3399_defconfig (following a rebase to the upstream master after CMD_BMP was migrate to Kconfig)
configs/puma-rk3399_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 577aa02..52fec39 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -26,7 +26,11 @@ CONFIG_CMD_SPI=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_BMP=y +CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_REGMAP=y @@ -74,4 +78,8 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_STORAGE=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y CONFIG_ERRNO_STR=y