On 7/9/20 9:35 AM, Patrick DELAUNAY wrote:
Hi Marcin,
From: Marcin Sloniewski marcin.sloniewski@gmail.com Sent: mercredi 8 juillet 2020 19:56
This commit adds device tree files supporting SBC from Seeed Studio based on STM32MP157C.
This works with generic stm32mp1 config. Right now only booting from SD card is supported.
Signed-off-by: Marcin Sloniewski marcin.sloniewski@gmail.com
Changes in v6:
- forgot to add changes in v5 ;(
Changes in v5:
- removed description of PLL1 which is now handled by OPP info
- removed cd-gpio for sdmmc1 since it is not yet supported
Changes in v4:
- removed unnecessary pull up on uart4 rx
Changes in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical order
Changes in v2:
- removed `st,adc_usb_pd` from config since that adc connection is non-existent which caused warning or hang during boot
arch/arm/dts/Makefile | 1 + .../dts/stm32mp157c-odyssey-som-u-boot.dtsi | 125 ++++++ arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 364 ++++++++++++++++++ arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi | 58 +++ arch/arm/dts/stm32mp157c-odyssey.dts | 161 ++++++++ 5 files changed, 709 insertions(+) create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
Reviewed-by: Patrick Delaunay patrick.delaunay@st.com
Thanks
Patrick
Applied to u-boot-stm/master
Thanks
Patrice