Some Armada 8K boards like Macchiatobin and Clearfog GT-8K use RAM from external DIMM. Hard coding the RAM size in the device-tree is not convenient. Fortunately, the ATF that initializes the RAM knows the size of RAM, and U-Boot can query the ATF using a SMC call.
The ATF maps the lower 3G of RAM starting at address 0. Higher RAM is mapped at 4G. This leaves a 1G hole between 3G and 4G for IO peripherals. Use a second bi_dram[] entry to describe the higher RAM area. As a result, CONFIG_NR_DRAM_BANKS must be set to 2 to use more than 3GB RAM.
This code in this commit is mostly taken from downstream Marvell U-Boot code by Grzegorz Jaszczyk.
Cc: Grzegorz Jaszczyk jaz@semihalf.com Signed-off-by: Baruch Siach baruch@tkos.co.il --- v4: No change
v3: No change
v2: Expand memory layout description in code comment and the commit log (Stefan) --- arch/arm/mach-mvebu/arm64-common.c | 50 +++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-mvebu/arm64-common.c b/arch/arm/mach-mvebu/arm64-common.c index f47273fde9c6..47bbf69944ec 100644 --- a/arch/arm/mach-mvebu/arm64-common.c +++ b/arch/arm/mach-mvebu/arm64-common.c @@ -7,6 +7,7 @@ #include <dm.h> #include <fdtdec.h> #include <linux/libfdt.h> +#include <linux/sizes.h> #include <pci.h> #include <asm/io.h> #include <asm/system.h> @@ -45,15 +46,62 @@ const struct mbus_dram_target_info *mvebu_mbus_dram_info(void)
/* DRAM init code ... */
+#define MV_SIP_DRAM_SIZE 0x82000010 + +static u64 a8k_dram_scan_ap_sz(void) +{ + struct pt_regs pregs; + + pregs.regs[0] = MV_SIP_DRAM_SIZE; + pregs.regs[1] = SOC_REGS_PHY_BASE; + smc_call(&pregs); + + return pregs.regs[0]; +} + +static void a8k_dram_init_banksize(void) +{ + /* + * The firmware (ATF) leaves a 1G whole above the 3G mark for IO + * devices. Higher RAM is mapped at 4G. + * + * Config 2 DRAM banks: + * Bank 0 - max size 4G - 1G + * Bank 1 - ram size - 4G + 1G + */ + phys_size_t max_bank0_size = SZ_4G - SZ_1G; + + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + if (gd->ram_size <= max_bank0_size) { + gd->bd->bi_dram[0].size = gd->ram_size; + return; + } + + gd->bd->bi_dram[0].size = max_bank0_size; + if (CONFIG_NR_DRAM_BANKS > 1) { + gd->bd->bi_dram[1].start = SZ_4G; + gd->bd->bi_dram[1].size = gd->ram_size - max_bank0_size; + } +} + int dram_init_banksize(void) { - fdtdec_setup_memory_banksize(); + if (CONFIG_IS_ENABLED(ARMADA_8K)) + a8k_dram_init_banksize(); + else + fdtdec_setup_memory_banksize();
return 0; }
int dram_init(void) { + if (CONFIG_IS_ENABLED(ARMADA_8K)) { + gd->ram_size = a8k_dram_scan_ap_sz(); + if (gd->ram_size != 0) + return 0; + } + if (fdtdec_setup_mem_size_base() != 0) return -EINVAL;