On 05/07/2019 11:43 AM, Kever Yang wrote:
On 04/16/2019 09:50 PM, David Wu wrote:
RK3288 pmu_gpio0 iomux setting have no higher 16 writing corresponding bits, need to read before write the register.
Signed-off-by: David Wu david.wu@rock-chips.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Applied to u-boot-rockchip, thanks!
Thanks,
- Kever
Change in v3:
- Add some comment
drivers/pinctrl/rockchip/pinctrl-rk3288.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3288.c b/drivers/pinctrl/rockchip/pinctrl-rk3288.c index 1fa601d954..5040cd8f48 100644 --- a/drivers/pinctrl/rockchip/pinctrl-rk3288.c +++ b/drivers/pinctrl/rockchip/pinctrl-rk3288.c @@ -54,7 +54,15 @@ static int rk3288_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) } }
- data = (mask << (bit + 16));
- /* bank0 is special, there are no higher 16 bit writing bits. */
- if (bank->bank_num == 0) {
regmap_read(regmap, reg, &data);data &= ~(mask << bit);- } else {
/* enable the write to the equivalent lower bits */data = (mask << (bit + 16));- }
- data |= (mux & mask) << bit; ret = regmap_write(regmap, reg, data);
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot