On 12/23/22 13:33, Sergiu Moga wrote:
Add the OHCI and EHCI DT nodes for the sam9x60 boards.
Signed-off-by: Sergiu Moga sergiu.moga@microchip.com
arch/arm/dts/at91-sam9x60_curiosity.dts | 21 +++++++++++++++++++++ arch/arm/dts/sam9x60.dtsi | 18 ++++++++++++++++++
Board and SoC DT changes should be in separate patches.
arch/arm/dts/sam9x60ek.dts | 21 +++++++++++++++++++++ 3 files changed, 60 insertions(+)
[...]
diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi index 17224ef771..e36a540f78 100644 --- a/arch/arm/dts/sam9x60.dtsi +++ b/arch/arm/dts/sam9x60.dtsi @@ -69,6 +69,24 @@ #size-cells = <1>; ranges;
usb1: ohci@600000 {
This should be usb@ instead of ohci@ , if you run "make dtbs_check" on this DT in Linux (please do), you would likely get a warning , see Linux Documentation/devicetree/bindings/usb/usb.yaml .
compatible = "atmel,at91rm9200-ohci", "usb-ohci";reg = <0x00600000 0x100000>;clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 21>;clock-names = "ohci_clk", "hclk", "uhpck";status = "disabled";};
[...]