+cc Paul
Am 18.04.20 um 05:15 schrieb Marek Vasut:
Replace the PCI IO access with PCI memory access, the card supports both, but the former does not work with QEMU SH4.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Daniel Schwierzeck daniel.schwierzeck@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com
Note: It would be good to test this on the mips malta
I can only test with Qemu. Maybe Paul could ack or test?
drivers/net/pcnet.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c index e7d6c8d714..34a5a16cfe 100644 --- a/drivers/net/pcnet.c +++ b/drivers/net/pcnet.c @@ -179,14 +179,14 @@ int pcnet_initialize(bd_t *bis) /* * Setup the PCI device. */
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &bar);dev->iobase = pci_io_to_phys(devbusfn, bar);
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &bar);dev->iobase = pci_mem_to_phys(devbusfn, bar);dev->iobase &= ~0xf;
PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%lx: ", dev->name, devbusfn, (unsigned long)dev->iobase);
command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;