Add the clock support.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
drivers/serial/atmel_usart.c | 37 +++++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 8b1e0d55a4..ab213c13fa 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -7,6 +7,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <clk.h> #include <dm.h> #include <errno.h> #include <watchdog.h> @@ -136,6 +137,7 @@ __weak struct serial_device *default_serial_console(void)
struct atmel_serial_priv { atmel_usart3_t *usart; + ulong usart_clk_rate; };
static void _atmel_serial_set_brg(atmel_usart3_t *usart, @@ -168,7 +170,7 @@ int atmel_serial_setbrg(struct udevice *dev, int baudrate) { struct atmel_serial_priv *priv = dev_get_priv(dev);
- _atmel_serial_set_brg(priv->usart, get_usart_clk_rate(0), baudrate); + _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate);
return 0; } @@ -213,10 +215,37 @@ static const struct dm_serial_ops atmel_serial_ops = { .setbrg = atmel_serial_setbrg, };
+static int atmel_serial_enable_clk(struct udevice *dev) +{ + struct atmel_serial_priv *priv = dev_get_priv(dev); + struct clk clk; + ulong clk_rate; + int ret; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret) + return -EINVAL; + + ret = clk_enable(&clk); + if (ret) + return ret; + + clk_rate = clk_get_rate(&clk); + if (!clk_rate) + return -EINVAL; + + priv->usart_clk_rate = clk_rate; + + clk_free(&clk); + + return 0; +} + static int atmel_serial_probe(struct udevice *dev) { struct atmel_serial_platdata *plat = dev->platdata; struct atmel_serial_priv *priv = dev_get_priv(dev); + int ret; #if CONFIG_IS_ENABLED(OF_CONTROL) fdt_addr_t addr_base;
@@ -228,7 +257,11 @@ static int atmel_serial_probe(struct udevice *dev) #endif priv->usart = (atmel_usart3_t *)plat->base_addr;
- _atmel_serial_init(priv->usart, get_usart_clk_rate(0), gd->baudrate); + ret = atmel_serial_enable_clk(dev); + if (ret) + return ret; + + _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate);
return 0; }