Hi,
I am sending ARM zynq changes. This series is based on FPGA changes I have sent http://lists.denx.de/pipermail/u-boot/2014-April/178204.html (There is small dependency on some patches). My expectation is that fpga series will go to Tom's tree first.
Thanks, Michal
Michal Simek (12): ARM: zynq: Fix sparse warnings in slcr.c ARM: zynq: Fix sparse warning in ddrc.c ARM: zynq: Remove sparse warnings ARM: zynq: Do not use half memory size for ECC case ARM: zynq: Call zynq board_init() in SPL ARM: zynq: slcr: Fix incorrect commentary ARM: zynq: Setup correct slcr_lock value ARM: zynq: Fix building SPL without FPGA support ARM: zynq: Extend kernel image size to 60MB ARM: zynq: Add MIO detection code ARM: zynq: ehci: Added USB host driver support ARM: zynq: Extend maximum number of command arguments
Mike Looijmans (1): ARM: zynq: Fix bootmode mask
Siva Durga Prasad Paladugu (5): ARM: zynq: Added efuse status register base address ARM: zynq: Added USB host support for zynq boards ARM: zynq: Enable the FAT write capability ARM: zynq: Move USB/SD/MMC common FAT configs ARM: zynq: Enable EXT4 configs
arch/arm/cpu/armv7/zynq/cpu.c | 13 ++++ arch/arm/cpu/armv7/zynq/ddrc.c | 5 +- arch/arm/cpu/armv7/zynq/slcr.c | 87 ++++++++++++++++++++++-- arch/arm/cpu/armv7/zynq/spl.c | 7 ++ arch/arm/include/asm/arch-zynq/hardware.h | 13 +++- arch/arm/include/asm/arch-zynq/sys_proto.h | 2 + board/xilinx/zynq/board.c | 25 ++++--- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-zynq.c | 104 +++++++++++++++++++++++++++++ include/configs/zynq-common.h | 32 +++++++-- include/configs/zynq_zc70x.h | 1 + include/configs/zynq_zed.h | 1 + 12 files changed, 268 insertions(+), 23 deletions(-) create mode 100644 drivers/usb/host/ehci-zynq.c
-- 1.8.2.3