Re: [PATCH 2/3] cmd: mvebu/bubt: move eMMC data-partition uboot from LBA-0 to 4096

On 10/8/23 14:46, Josua Mayer wrote:

A38x bootrom only searches 2 sectors when booting from eMMC, irregardless of data or boot partition: 0 & 4096.

For eMMC boot partitions sector 0 is fine, but on data partition it conflicts with MBR.

Change bubt command default to 4096 for eMMC data partition only, to allow using an MBR partition table on the eMMC data partition while also booting from it.

Signed-off-by: Josua Mayer josua@solid-run.com

Reviewed-by: Stefan Roese sr@denx.de

Thanks, Stefan

---

cmd/mvebu/bubt.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c index ca24a5c1c4b..eb1fef9243d 100644 --- a/cmd/mvebu/bubt.c +++ b/cmd/mvebu/bubt.c @@ -240,9 +240,14 @@ static int mmc_burn_image(size_t image_size) #endif

/* SD reserves LBA-0 for MBR and boots from LBA-1,

• * MMC/eMMC boots from LBA-0
  

• * MMC/eMMC boots from LBA-0 and LBA-4096
  

  */

• start_lba = IS_SD(mmc) ? 1 : 0;

• if (IS_SD(mmc))

• start_lba = 1;
  

• else if (!part)

• start_lba = 4096;
  

• else

• start_lba = 0;
  

  #ifdef CONFIG_BLK blk_count = image_size / mmc->write_bl_len; if (image_size % mmc->write_bl_len)

Viele Grüße, Stefan Roese