[U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c

Current code looks strange because no matter the value argument is 0 or 1 it always calls writel(1 << gpio, &regs->gpiodata[DATA_REG_ADDR(gpio)]);

And then gpio_get_value() always return 1.

I'm wondering if it needs to be fixed, something like below change:

diff --git a/drivers/gpio/spear_gpio.c b/drivers/gpio/spear_gpio.c index d3c728e..8878608 100644 --- a/drivers/gpio/spear_gpio.c +++ b/drivers/gpio/spear_gpio.c @@ -52,7 +52,10 @@ int gpio_set_value(unsigned gpio, int value) { struct gpio_regs *regs = (struct gpio_regs *)CONFIG_GPIO_BASE;

- writel(1 << gpio, &regs->gpiodata[DATA_REG_ADDR(gpio)]); + if (value) + writel(1 << gpio, &regs->gpiodata[DATA_REG_ADDR(gpio)]); + else + writel(0, &regs->gpiodata[DATA_REG_ADDR(gpio)]);

return 0; }