Due to introducing the PMC_PLLICPR init function, use this function to clean up the code.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
arch/arm/mach-at91/spl_at91.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c index b19f95b..cc3341a 100644 --- a/arch/arm/mach-at91/spl_at91.c +++ b/arch/arm/mach-at91/spl_at91.c @@ -14,7 +14,6 @@ #include <asm/arch/at91_common.h> #include <asm/arch/at91sam9_matrix.h> #include <asm/arch/at91_pit.h> -#include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/at91_wdt.h> #include <asm/arch/clk.h> @@ -77,8 +76,6 @@ void __weak spl_board_init(void)
void board_init_f(ulong dummy) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - lowlevel_clock_init(); at91_disable_wdt();
@@ -86,7 +83,7 @@ void board_init_f(ulong dummy) * At this stage the main oscillator is supposed to be enabled * PCK = MCK = MOSC */ - writel(0x00, &pmc->pllicpr); + at91_pllicpr_init(0x00);
/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */ at91_plla_init(CONFIG_SYS_AT91_PLLA);