
Remove outdated macros and comments (not used any more, outdated due to DM conversion) from socfpga_common.h.
Signed-off-by: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com ---
Changes in v3: - changed commit message: s/defines/macros and comments/
Changes in v2: - remove even more outdated things
include/configs/socfpga_common.h | 40 -------------------------------- 1 file changed, 40 deletions(-)
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index a65fc804e3..5b5e5f5d43 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -72,29 +72,12 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot argument buffer size */
-#ifndef CONFIG_SYS_HOSTNAME -#define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD -#endif - /* * Cache */ #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
-/* - * EPCS/EPCQx1 Serial Flash Controller - */ -#ifdef CONFIG_ALTERA_SPI -/* - * The base address is configurable in QSys, each board must specify the - * base address based on it's particular FPGA configuration. Please note - * that the address here is incremented by 0x400 from the Base address - * selected in QSys, since the SPI registers are at offset +0x400. - * #define CONFIG_SYS_SPI_BASE 0xff240400 - */ -#endif - /* * Ethernet on SoC (EMAC) */ @@ -162,15 +145,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() #endif
-/* - * Designware SPI support - */ - -/* - * Serial Driver - */ -#define CONFIG_SYS_NS16550_SERIAL - /* * USB */ @@ -206,20 +180,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_ENV_SECT_SIZE (64 * 1024) #endif
-/* - * mtd partitioning for serial NOR flash - * - * device nor0 <ff705000.spi.0>, # parts = 6 - * #: name size offset mask_flags - * 0: u-boot 0x00100000 0x00000000 0 - * 1: env1 0x00040000 0x00100000 0 - * 2: env2 0x00040000 0x00140000 0 - * 3: UBI 0x03e80000 0x00180000 0 - * 4: boot 0x00e80000 0x00180000 0 - * 5: rootfs 0x01000000 0x01000000 0 - * - */ - /* * SPL *