On Fri, 24 Mar 2023 at 06:10, Konrad Dybcio konrad.dybcio@linaro.org wrote:
The name "se" is used in upstream Linux device trees and has been for ages, long before this U-Boot-ism was introduced. Same goes for the existing compatible. Get rid of that.
Signed-off-by: Konrad Dybcio konrad.dybcio@linaro.org
arch/arm/dts/sdm845.dtsi | 4 ++-- drivers/serial/serial_msm_geni.c | 6 ++++-- 2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi index 607af277f8be..92bdc82177d6 100644 --- a/arch/arm/dts/sdm845.dtsi +++ b/arch/arm/dts/sdm845.dtsi @@ -52,10 +52,10 @@ };
debug_uart: serial@a84000 {
compatible = "qcom,msm-geni-uart";
compatible = "qcom,geni-debug-uart";
With this the custom u-boot DT bindings [1] becomes redundant, we should remove that as well.
[1] doc/device-tree-bindings/serial/msm-geni-serial.txt
-Sumit
reg = <0xa84000 0x4000>; reg-names = "se_phys";
clock-names = "se-clk";
clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_uart9>;diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c index 3943ca43e49e..6c9371c4e69d 100644 --- a/drivers/serial/serial_msm_geni.c +++ b/drivers/serial/serial_msm_geni.c @@ -189,7 +189,7 @@ static int geni_serial_set_clock_rate(struct udevice *dev, u64 rate) struct clk *clk; int ret;
clk = devm_clk_get(dev, "se-clk");
clk = devm_clk_get(dev, "se"); if (!clk) return -EINVAL;@@ -554,7 +554,9 @@ static int msm_serial_ofdata_to_platdata(struct udevice *dev) }
static const struct udevice_id msm_serial_ids[] = {
{.compatible = "qcom,msm-geni-uart"}, {}};
{ .compatible = "qcom,geni-debug-uart" },{ }+};
U_BOOT_DRIVER(serial_msm_geni) = { .name = "serial_msm_geni", -- 2.40.0