There was for long time no activity in the 8260 area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8260, so remove it.
Signed-off-by: Heiko Schocher hs@denx.de
---
.travis.yml | 2 - README | 73 +- api/api_platform-powerpc.c | 2 +- arch/powerpc/Kconfig | 6 - arch/powerpc/cpu/mpc8260/Kconfig | 20 - arch/powerpc/cpu/mpc8260/Makefile | 13 - arch/powerpc/cpu/mpc8260/bedbug_603e.c | 236 ------ arch/powerpc/cpu/mpc8260/commproc.c | 174 ----- arch/powerpc/cpu/mpc8260/config.mk | 9 - arch/powerpc/cpu/mpc8260/cpu.c | 323 -------- arch/powerpc/cpu/mpc8260/cpu_init.c | 272 ------- arch/powerpc/cpu/mpc8260/ether_fcc.c | 1155 ---------------------------- arch/powerpc/cpu/mpc8260/ether_scc.c | 367 --------- arch/powerpc/cpu/mpc8260/interrupts.c | 255 ------ arch/powerpc/cpu/mpc8260/kgdb.S | 52 -- arch/powerpc/cpu/mpc8260/pci.c | 382 --------- arch/powerpc/cpu/mpc8260/serial_scc.c | 492 ------------ arch/powerpc/cpu/mpc8260/serial_smc.c | 461 ----------- arch/powerpc/cpu/mpc8260/speed.c | 228 ------ arch/powerpc/cpu/mpc8260/spi.c | 408 ---------- arch/powerpc/cpu/mpc8260/start.S | 901 ---------------------- arch/powerpc/cpu/mpc8260/traps.c | 248 ------ arch/powerpc/cpu/mpc8260/u-boot.lds | 74 -- arch/powerpc/cpu/mpc83xx/start.S | 2 +- arch/powerpc/include/asm/cpm_8260.h | 795 ------------------- arch/powerpc/include/asm/immap_8260.h | 604 --------------- arch/powerpc/include/asm/iopin_8260.h | 168 ---- arch/powerpc/include/asm/m8260_pci.h | 165 ---- arch/powerpc/include/asm/ppc.h | 5 - arch/powerpc/include/asm/processor.h | 3 - arch/powerpc/include/asm/status_led.h | 4 +- arch/powerpc/lib/Kconfig | 8 - arch/powerpc/lib/Makefile | 1 - arch/powerpc/lib/immap.c | 629 --------------- arch/powerpc/lib/kgdb.c | 52 -- board/keymile/km82xx/Kconfig | 12 - board/keymile/km82xx/MAINTAINERS | 7 - board/keymile/km82xx/Makefile | 8 - board/keymile/km82xx/km82xx.c | 463 ----------- cmd/bdinfo.c | 2 +- cmd/bedbug.c | 7 - common/board_f.c | 2 +- common/lynxkdi.c | 2 +- configs/mgcoge3ne_defconfig | 25 - configs/mgcoge_defconfig | 25 - doc/README.idma2intr | 10 - drivers/bootcount/bootcount.c | 5 - drivers/i2c/soft_i2c.c | 9 - drivers/pci/pci_indirect.c | 17 +- drivers/usb/gadget/gadget_chips.h | 9 - examples/standalone/Makefile | 1 - examples/standalone/mem_to_mem_idma2intr.c | 379 --------- include/asm-generic/u-boot.h | 2 +- include/configs/km82xx.h | 427 ---------- include/i2c.h | 4 +- include/mpc8260.h | 903 ---------------------- include/mpc8260_irq.h | 48 -- include/post.h | 4 - include/ppc_asm.tmpl | 26 +- post/drivers/memory.c | 7 - scripts/config_whitelist.txt | 75 -- 61 files changed, 17 insertions(+), 11051 deletions(-) delete mode 100644 arch/powerpc/cpu/mpc8260/Kconfig delete mode 100644 arch/powerpc/cpu/mpc8260/Makefile delete mode 100644 arch/powerpc/cpu/mpc8260/bedbug_603e.c delete mode 100644 arch/powerpc/cpu/mpc8260/commproc.c delete mode 100644 arch/powerpc/cpu/mpc8260/config.mk delete mode 100644 arch/powerpc/cpu/mpc8260/cpu.c delete mode 100644 arch/powerpc/cpu/mpc8260/cpu_init.c delete mode 100644 arch/powerpc/cpu/mpc8260/ether_fcc.c delete mode 100644 arch/powerpc/cpu/mpc8260/ether_scc.c delete mode 100644 arch/powerpc/cpu/mpc8260/interrupts.c delete mode 100644 arch/powerpc/cpu/mpc8260/kgdb.S delete mode 100644 arch/powerpc/cpu/mpc8260/pci.c delete mode 100644 arch/powerpc/cpu/mpc8260/serial_scc.c delete mode 100644 arch/powerpc/cpu/mpc8260/serial_smc.c delete mode 100644 arch/powerpc/cpu/mpc8260/speed.c delete mode 100644 arch/powerpc/cpu/mpc8260/spi.c delete mode 100644 arch/powerpc/cpu/mpc8260/start.S delete mode 100644 arch/powerpc/cpu/mpc8260/traps.c delete mode 100644 arch/powerpc/cpu/mpc8260/u-boot.lds delete mode 100644 arch/powerpc/include/asm/cpm_8260.h delete mode 100644 arch/powerpc/include/asm/immap_8260.h delete mode 100644 arch/powerpc/include/asm/iopin_8260.h delete mode 100644 arch/powerpc/include/asm/m8260_pci.h delete mode 100644 arch/powerpc/lib/Kconfig delete mode 100644 arch/powerpc/lib/immap.c delete mode 100644 board/keymile/km82xx/Kconfig delete mode 100644 board/keymile/km82xx/MAINTAINERS delete mode 100644 board/keymile/km82xx/Makefile delete mode 100644 board/keymile/km82xx/km82xx.c delete mode 100644 configs/mgcoge3ne_defconfig delete mode 100644 configs/mgcoge_defconfig delete mode 100644 doc/README.idma2intr delete mode 100644 examples/standalone/mem_to_mem_idma2intr.c delete mode 100644 include/configs/km82xx.h delete mode 100644 include/mpc8260.h delete mode 100644 include/mpc8260_irq.h
diff --git a/.travis.yml b/.travis.yml index 8915284..3105a6f 100644 --- a/.travis.yml +++ b/.travis.yml @@ -200,8 +200,6 @@ matrix: - env: - BUILDMAN="mpc5xxx" - env: - - BUILDMAN="mpc8260" - - env: - BUILDMAN="mpc83xx" - env: - BUILDMAN="mpc85xx -x freescale" diff --git a/README b/README index 6355c79..6f2c0a2 100644 --- a/README +++ b/README @@ -700,14 +700,6 @@ The following options need to be configured: Select one of the baudrates listed in CONFIG_SYS_BAUDRATE_TABLE, see below.
-- Console Rx buffer length - With CONFIG_SYS_SMC_RXBUFLEN it is possible to define - the maximum receive buffer length for the SMC. - This option is actual only for 82xx possible. - If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE - must be defined, to setup the maximum idle timeout for - the SMC. - - Autoboot Command: CONFIG_BOOTCOMMAND Only needed when CONFIG_BOOTDELAY is enabled; @@ -937,11 +929,9 @@ The following options need to be configured: CONFIG_WATCHDOG If this variable is defined, it enables watchdog support for the SoC. There must be support in the SoC - specific code for a watchdog. For the 8260 - CPUs, the SIU Watchdog feature is enabled in the SYPCR - register. When supported for a specific SoC is - available, then no further board specific code should - be needed to use it. + specific code for a watchdog. When supported for a + specific SoC is available, then no further board specific + code should be needed to use it.
CONFIG_HW_WATCHDOG When using a watchdog circuitry external to the used @@ -2108,12 +2098,6 @@ The following options need to be configured:
eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
- I2C_PORT - - (Only for MPC8260 CPU). The I/O port to use (the code - assumes both bits are on the same port). Valid values - are 0..3 for ports A..D. - I2C_ACTIVE
The code necessary to make the I2C data line active @@ -2402,7 +2386,7 @@ The following options need to be configured:
IVMS8, IVML24, SPD8xx, HERMES, IP860, RPXlite, LWMON, - FLAGADM, TQM8260 + FLAGADM
- Access to physical memory region (> 4GB) Some basic support is provided for operations on memory not @@ -3860,16 +3844,6 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface. set. If this value is set, it must be set to the same value as CONFIG_ENV_SIZE.
-- CONFIG_SYS_SPI_INIT_OFFSET - - Defines offset to the initial SPI buffer area in DPRAM. The - area is used at an early stage (ROM part) if the environment - is configured to reside in the SPI EEPROM: We need a 520 byte - scratch DPRAM area. It is used between the two initialization - calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems - to be a good choice since it makes it far enough from the - start of the data area as well as from the stack pointer. - Please note that the environment is read-only until the monitor has been relocated to RAM and a RAM copy of the environment has been created; also, when using EEPROM you will have to use getenv_f() @@ -3923,13 +3897,6 @@ Low Level (hardware related) configuration options: - CONFIG_SYS_CACHELINE_SIZE: Cache Line Size of the CPU.
-- CONFIG_SYS_DEFAULT_IMMR: - Default address of the IMMR after system reset. - - Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, - and RPXsuper) to be able to adjust the position of - the IMMR register after a reset. - - CONFIG_SYS_CCSRBAR_DEFAULT: Default (power-on reset) physical address of CCSR on Freescale PowerPC SOCs. @@ -3938,9 +3905,6 @@ Low Level (hardware related) configuration options: Virtual address of CCSR. On a 32-bit build, this is typically the same value as CONFIG_SYS_CCSRBAR_DEFAULT.
- CONFIG_SYS_DEFAULT_IMMR must also be set to this value, - for cross-platform code that uses that macro instead. - - CONFIG_SYS_CCSRBAR_PHYS: Physical address of CCSR. CCSR can be relocated to a new physical address, if desired. In this case, this macro should @@ -4016,8 +3980,6 @@ Low Level (hardware related) configuration options: sequences.
U-Boot uses the following memory types: - - MPC8260: IMMR (internal memory of the CPU) - - MPC824X: data cache - PPC4xx: data cache
- CONFIG_SYS_GBL_DATA_OFFSET: @@ -4069,27 +4031,6 @@ Low Level (hardware related) configuration options: CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM: Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM)
-- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K, - CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL: - Machine Mode Register and Memory Periodic Timer - Prescaler definitions (SDRAM timing) - -- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8260 only) - Offset of the bootmode word in DPRAM used by post - (Power On Self Tests). This definition overrides - #define'd default value in commproc.h resp. - cpm_8260.h. - -- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB, - CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL, - CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS, - CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB, - CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, - CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL, - CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE, - CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only) - Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set. - - CONFIG_PCI_DISABLE_PCIE: Disable PCI-Express on systems where it is supported but not required. @@ -5710,9 +5651,9 @@ configuration for CS0# this is a mirror of the on board Flash memory. To be able to re-map memory U-Boot then jumps to its link address. To be able to implement the initialization code in C, a (small!) initial stack is set up in the internal Dual Ported RAM (in case CPUs -which provide such a feature like MPC8xx or MPC8260), or in a locked -part of the data cache. After that, U-Boot initializes the CPU core, -the caches and the SIU. +which provide such a feature like), or in a locked part of the data +cache. After that, U-Boot initializes the CPU core, the caches and +the SIU.
Next, all (potentially) available memory banks are mapped using a preliminary mapping. For example, we put them on 512 MB boundaries diff --git a/api/api_platform-powerpc.c b/api/api_platform-powerpc.c index 71fea5a..307a5f5 100644 --- a/api/api_platform-powerpc.c +++ b/api/api_platform-powerpc.c @@ -30,7 +30,7 @@ int platform_sys_info(struct sys_info *si) si->clk_bus = gd->bus_clk; si->clk_cpu = gd->cpu_clk;
-#if defined(CONFIG_5xx) || defined(CONFIG_MPC8260) || \ +#if defined(CONFIG_5xx) || \ defined(CONFIG_E500) || defined(CONFIG_MPC86xx) #define bi_bar bi_immr_base #elif defined(CONFIG_MPC5xxx) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 671d2cc..75594c6 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -17,9 +17,6 @@ config 5xx config MPC5xxx bool "MPC5xxx"
-config MPC8260 - bool "MPC8260" - config MPC83xx bool "MPC83xx" select CREATE_ARCH_SYMLINK @@ -48,12 +45,9 @@ config 4xx
endchoice
-source "arch/powerpc/lib/Kconfig" - source "arch/powerpc/cpu/mpc512x/Kconfig" source "arch/powerpc/cpu/mpc5xx/Kconfig" source "arch/powerpc/cpu/mpc5xxx/Kconfig" -source "arch/powerpc/cpu/mpc8260/Kconfig" source "arch/powerpc/cpu/mpc83xx/Kconfig" source "arch/powerpc/cpu/mpc85xx/Kconfig" source "arch/powerpc/cpu/mpc86xx/Kconfig" diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig deleted file mode 100644 index 47bae55..0000000 --- a/arch/powerpc/cpu/mpc8260/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -menu "mpc8260 CPU" - depends on MPC8260 - -config SYS_CPU - default "mpc8260" - -choice - prompt "Target select" - optional - -config TARGET_KM82XX - bool "Support km82xx" - imply CMD_CRAMFS - imply FS_CRAMFS - -endchoice - -source "board/keymile/km82xx/Kconfig" - -endmenu diff --git a/arch/powerpc/cpu/mpc8260/Makefile b/arch/powerpc/cpu/mpc8260/Makefile deleted file mode 100644 index 72dd8ab..0000000 --- a/arch/powerpc/cpu/mpc8260/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2000-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -extra-y = start.o -obj-y = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \ - interrupts.o ether_fcc.o commproc.o \ - bedbug_603e.o pci.o spi.o kgdb.o - -obj-$(CONFIG_ETHER_ON_SCC) += ether_scc.o diff --git a/arch/powerpc/cpu/mpc8260/bedbug_603e.c b/arch/powerpc/cpu/mpc8260/bedbug_603e.c deleted file mode 100644 index 92f8957..0000000 --- a/arch/powerpc/cpu/mpc8260/bedbug_603e.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Bedbug Functions specific to the MPC603e core - */ - -#include <common.h> -#include <command.h> -#include <linux/ctype.h> -#include <bedbug/type.h> -#include <bedbug/bedbug.h> -#include <bedbug/regs.h> -#include <bedbug/ppc.h> - -#if defined(CONFIG_CMD_BEDBUG) \ - && (defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260)) - -#define MAX_BREAK_POINTS 1 - -extern CPU_DEBUG_CTX bug_ctx; - -void bedbug603e_init __P((void)); -void bedbug603e_do_break __P((cmd_tbl_t*,int,int,char*const[])); -void bedbug603e_break_isr __P((struct pt_regs*)); -int bedbug603e_find_empty __P((void)); -int bedbug603e_set __P((int,unsigned long)); -int bedbug603e_clear __P((int)); - - -/* ====================================================================== - * Initialize the global bug_ctx structure for the processor. Clear all - * of the breakpoints. - * ====================================================================== */ - -void bedbug603e_init( void ) -{ - int i; - /* -------------------------------------------------- */ - - bug_ctx.hw_debug_enabled = 0; - bug_ctx.stopped = 0; - bug_ctx.current_bp = 0; - bug_ctx.regs = NULL; - - bug_ctx.do_break = bedbug603e_do_break; - bug_ctx.break_isr = bedbug603e_break_isr; - bug_ctx.find_empty = bedbug603e_find_empty; - bug_ctx.set = bedbug603e_set; - bug_ctx.clear = bedbug603e_clear; - - for( i = 1; i <= MAX_BREAK_POINTS; ++i ) - (*bug_ctx.clear)( i ); - - puts ("BEDBUG:ready\n"); - return; -} /* bedbug_init_breakpoints */ - - - -/* ====================================================================== - * Set/clear/show the hardware breakpoint for the 603e. The "off" - * string will disable a specific breakpoint. The "show" string will - * display the current breakpoints. Otherwise an address will set a - * breakpoint at that address. Setting a breakpoint uses the CPU-specific - * set routine which will assign a breakpoint number. - * ====================================================================== */ - -void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) -{ - long addr; /* Address to break at */ - int which_bp; /* Breakpoint number */ - /* -------------------------------------------------- */ - - if (argc < 2) { - cmd_usage(cmdtp); - return; - } - - /* Turn off a breakpoint */ - - if( strcmp( argv[ 1 ], "off" ) == 0 ) - { - if( bug_ctx.hw_debug_enabled == 0 ) - { - puts ( "No breakpoints enabled\n" ); - return; - } - - which_bp = simple_strtoul( argv[ 2 ], NULL, 10 ); - - if( bug_ctx.clear ) - (*bug_ctx.clear)( which_bp ); - - printf( "Breakpoint %d removed\n", which_bp ); - return; - } - - /* Show a list of breakpoints */ - - if( strcmp( argv[ 1 ], "show" ) == 0 ) - { - for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp ) - { - - addr = GET_IABR(); - - printf( "Breakpoint [%d]: ", which_bp ); - if( (addr & 0x00000002) == 0 ) - puts ( "NOT SET\n" ); - else - disppc( (unsigned char *)(addr & 0xFFFFFFFC), 0, 1, bedbug_puts, F_RADHEX ); - } - return; - } - - /* Set a breakpoint at the address */ - - if(!(( isdigit( argv[ 1 ][ 0 ] )) || - (( argv[ 1 ][ 0 ] >= 'a' ) && ( argv[ 1 ][ 0 ] <= 'f' )) || - (( argv[ 1 ][ 0 ] >= 'A' ) && ( argv[ 1 ][ 0 ] <= 'F' )))) { - cmd_usage(cmdtp); - return; - } - - addr = simple_strtoul( argv[ 1 ], NULL, 16 ); - - if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 ) - { - printf( "Breakpoint [%d]: ", which_bp ); - disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX ); - } - - return; -} /* bedbug603e_do_break */ - - - -/* ====================================================================== - * Handle a breakpoint. Enter a mini main loop. Stay in the loop until - * the stopped flag in the debug context is cleared. - * ====================================================================== */ - -void bedbug603e_break_isr( struct pt_regs *regs ) -{ - unsigned long addr; /* Address stopped at */ - /* -------------------------------------------------- */ - - bug_ctx.current_bp = 1; - addr = GET_IABR() & 0xFFFFFFFC; - - bedbug_main_loop( addr, regs ); - return; -} /* bedbug603e_break_isr */ - - - -/* ====================================================================== - * See if the hardware breakpoint is available. - * ====================================================================== */ - -int bedbug603e_find_empty( void ) -{ - /* -------------------------------------------------- */ - - if( (GET_IABR() && 0x00000002) == 0 ) - return 1; - - return 0; -} /* bedbug603e_find_empty */ - - - -/* ====================================================================== - * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint - * number, otherwise reassign the given breakpoint. If hardware debugging - * is not enabled, then turn it on via the MSR and DBCR0. Set the break - * address in the IABR register. - * ====================================================================== */ - -int bedbug603e_set( int which_bp, unsigned long addr ) -{ - /* -------------------------------------------------- */ - - if(( addr & 0x00000003 ) != 0 ) - { - puts ( "Breakpoints must be on a 32 bit boundary\n" ); - return 0; - } - - /* Only look if which_bp == 0, else use which_bp */ - if(( bug_ctx.find_empty ) && ( !which_bp ) && - ( which_bp = (*bug_ctx.find_empty)()) == 0 ) - { - puts ( "All breakpoints in use\n" ); - return 0; - } - - if( which_bp < 1 || which_bp > MAX_BREAK_POINTS ) - { - printf( "Invalid break point # %d\n", which_bp ); - return 0; - } - - if( ! bug_ctx.hw_debug_enabled ) - { - bug_ctx.hw_debug_enabled = 1; - } - - SET_IABR( addr | 0x00000002 ); - - return which_bp; -} /* bedbug603e_set */ - - - -/* ====================================================================== - * Disable a specific breakoint by setting the IABR register to zero. - * ====================================================================== */ - -int bedbug603e_clear( int which_bp ) -{ - /* -------------------------------------------------- */ - - if( which_bp < 1 || which_bp > MAX_BREAK_POINTS ) - { - printf( "Invalid break point # (%d)\n", which_bp ); - return -1; - } - - SET_IABR( 0 ); - - return 0; -} /* bedbug603e_clear */ - - -/* ====================================================================== */ -#endif diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c deleted file mode 100644 index ff69881..0000000 --- a/arch/powerpc/cpu/mpc8260/commproc.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's - * copyright notice: - * - * General Purpose functions for the global management of the - * 8260 Communication Processor Module. - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com) - * 2.3.99 Updates - * - * In addition to the individual control of the communication - * channels, there are a few functions that globally affect the - * communication processor. - * - * Buffer descriptors must be allocated from the dual ported memory - * space. The allocator for that is here. When the communication - * process is reset, we reclaim the memory available. There is - * currently no deallocator for this memory. - */ -#include <common.h> -#include <asm/cpm_8260.h> - -DECLARE_GLOBAL_DATA_PTR; - -void -m8260_cpm_reset(void) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - volatile ulong count; - - /* Reclaim the DP memory for our use. - */ - gd->arch.dp_alloc_base = CPM_DATAONLY_BASE; - gd->arch.dp_alloc_top = gd->arch.dp_alloc_base + CPM_DATAONLY_SIZE; - - /* - * Reset CPM - */ - immr->im_cpm.cp_cpcr = CPM_CR_RST; - count = 0; - do { /* Spin until command processed */ - __asm__ __volatile__ ("eieio"); - } while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000); -} - -/* Allocate some memory from the dual ported ram. - * To help protocols with object alignment restrictions, we do that - * if they ask. - */ -uint -m8260_cpm_dpalloc(uint size, uint align) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - uint retloc; - uint align_mask, off; - uint savebase; - - align_mask = align - 1; - savebase = gd->arch.dp_alloc_base; - - off = gd->arch.dp_alloc_base & align_mask; - if (off != 0) - gd->arch.dp_alloc_base += (align - off); - - if ((off = size & align_mask) != 0) - size += align - off; - - if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top) { - gd->arch.dp_alloc_base = savebase; - panic("m8260_cpm_dpalloc: ran out of dual port ram!"); - } - - retloc = gd->arch.dp_alloc_base; - gd->arch.dp_alloc_base += size; - - memset((void *)&immr->im_dprambase[retloc], 0, size); - - return(retloc); -} - -/* We also own one page of host buffer space for the allocation of - * UART "fifos" and the like. - */ -uint -m8260_cpm_hostalloc(uint size, uint align) -{ - /* the host might not even have RAM yet - just use dual port RAM */ - return (m8260_cpm_dpalloc(size, align)); -} - -/* Set a baud rate generator. This needs lots of work. There are - * eight BRGs, which can be connected to the CPM channels or output - * as clocks. The BRGs are in two different block of internal - * memory mapped space. - * The baud rate clock is the system clock divided by something. - * It was set up long ago during the initial boot phase and is - * is given to us. - * Baud rate clocks are zero-based in the driver code (as that maps - * to port numbers). Documentation uses 1-based numbering. - */ -#define BRG_INT_CLK gd->arch.brg_clk -#define BRG_UART_CLK (BRG_INT_CLK / 16) - -/* This function is used by UARTs, or anything else that uses a 16x - * oversampled clock. - */ -void -m8260_cpm_setbrg(uint brg, uint rate) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - volatile uint *bp; - uint cd = BRG_UART_CLK / rate; - - if ((BRG_UART_CLK % rate) < (rate / 2)) - cd--; - if (brg < 4) { - bp = (uint *)&immr->im_brgc1; - } - else { - bp = (uint *)&immr->im_brgc5; - brg -= 4; - } - bp += brg; - *bp = (cd << 1) | CPM_BRG_EN; -} - -/* This function is used to set high speed synchronous baud rate - * clocks. - */ -void -m8260_cpm_fastbrg(uint brg, uint rate, int div16) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - volatile uint *bp; - - /* This is good enough to get SMCs running..... - */ - if (brg < 4) { - bp = (uint *)&immr->im_brgc1; - } - else { - bp = (uint *)&immr->im_brgc5; - brg -= 4; - } - bp += brg; - *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN; - if (div16) - *bp |= CPM_BRG_DIV16; -} - -/* This function is used to set baud rate generators using an external - * clock source and 16x oversampling. - */ - -void -m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - volatile uint *bp; - - if (brg < 4) { - bp = (uint *)&immr->im_brgc1; - } - else { - bp = (uint *)&immr->im_brgc5; - brg -= 4; - } - bp += brg; - *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN; - if (pinsel == 0) - *bp |= CPM_BRG_EXTC_CLK3_9; - else - *bp |= CPM_BRG_EXTC_CLK5_15; -} diff --git a/arch/powerpc/cpu/mpc8260/config.mk b/arch/powerpc/cpu/mpc8260/config.mk deleted file mode 100644 index 6a1b6e3..0000000 --- a/arch/powerpc/cpu/mpc8260/config.mk +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_CPM2 \ - -mstring -mcpu=603e -mmultiple diff --git a/arch/powerpc/cpu/mpc8260/cpu.c b/arch/powerpc/cpu/mpc8260/cpu.c deleted file mode 100644 index 7302b37..0000000 --- a/arch/powerpc/cpu/mpc8260/cpu.c +++ /dev/null @@ -1,323 +0,0 @@ -/* - * (C) Copyright 2000-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x - * - * written or collected and sometimes rewritten by - * Magnus Damm damm@bitsmart.com - * - * modified by - * Wolfgang Denk wd@denx.de - * - * modified for 8260 by - * Murray Jensen Murray.Jensen@cmst.csiro.au - * - * added 8260 masks by - * Marius Groeger mag@sysgo.de - * - * added HiP7 (824x/827x/8280) processors support by - * Yuli Barcohen yuli@arabellasw.com - */ - -#include <common.h> -#include <watchdog.h> -#include <command.h> -#include <mpc8260.h> -#include <netdev.h> -#include <asm/processor.h> -#include <asm/cpm_8260.h> - -#if defined(CONFIG_OF_LIBFDT) -#include <libfdt.h> -#include <fdt_support.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_GET_CPU_STR_F) -extern int get_cpu_str_f (char *buf); -#endif - -int checkcpu (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - ulong clock = gd->cpu_clk; - uint pvr = get_pvr (); - uint immr, rev, m, k; - char buf[32]; - int ret; - - ret = prt_8260_rsr(); - if (ret) - return ret; - ret = prt_8260_clks(); - if (ret) - return ret; - puts ("CPU: "); - - switch (pvr) { - case PVR_8260: - case PVR_8260_HIP3: - k = 3; - break; - case PVR_8260_HIP4: - k = 4; - break; - case PVR_8260_HIP7R1: - case PVR_8260_HIP7RA: - case PVR_8260_HIP7: - k = 7; - break; - default: - return -1; /* whoops! not an MPC8260 */ - } - rev = pvr & 0xff; - - immr = immap->im_memctl.memc_immr; - if ((immr & IMMR_ISB_MSK) != CONFIG_SYS_IMMR) - return -1; /* whoops! someone moved the IMMR */ - -#if defined(CONFIG_GET_CPU_STR_F) - get_cpu_str_f (buf); - printf ("%s (HiP%d Rev %02x, Mask ", buf, k, rev); -#else - printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev); -#endif - - /* - * the bottom 16 bits of the immr are the Part Number and Mask Number - * (4-34); the 16 bits at PROFF_REVNUM (0x8af0) in dual port ram is the - * RISC Microcode Revision Number (13-10). - * For the 8260, Motorola doesn't include the Microcode Revision - * in the mask. - */ - m = immr & (IMMR_PARTNUM_MSK | IMMR_MASKNUM_MSK); - k = immap->im_dprambase16[PROFF_REVNUM / sizeof(u16)]; - - switch (m) { - case 0x0000: - puts ("0.2 2J24M"); - break; - case 0x0010: - puts ("A.0 K22A"); - break; - case 0x0011: - puts ("A.1 1K22A-XC"); - break; - case 0x0001: - puts ("B.1 1K23A"); - break; - case 0x0021: - puts ("B.2 2K23A-XC"); - break; - case 0x0023: - puts ("B.3 3K23A"); - break; - case 0x0024: - puts ("C.2 6K23A"); - break; - case 0x0060: - puts ("A.0(A) 2K25A"); - break; - case 0x0062: - puts ("B.1 4K25A"); - break; - case 0x0064: - puts ("C.0 5K25A"); - break; - case 0x0A00: - puts ("0.0 0K49M"); - break; - case 0x0A01: - puts ("0.1 1K49M"); - break; - case 0x0A10: - puts ("1.0 1K49M"); - break; - case 0x0C00: - puts ("0.0 0K50M"); - break; - case 0x0C10: - puts ("1.0 1K50M"); - break; - case 0x0D00: - puts ("0.0 0K50M"); - break; - case 0x0D10: - puts ("1.0 1K50M"); - break; - default: - printf ("unknown [immr=0x%04x,k=0x%04x]", m, k); - break; - } - - printf (") at %s MHz\n", strmhz (buf, clock)); - - return 0; -} - -/* ------------------------------------------------------------------------- */ -/* configures a UPM by writing into the UPM RAM array */ -/* uses bank 11 and a dummy physical address (=BRx_BA_MSK) */ -/* NOTE: the physical address chosen must not overlap into any other area */ -/* mapped by the memory controller because bank 11 has the lowest priority */ - -void upmconfig (uint upm, uint * table, uint size) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - volatile uchar *dummy = (uchar *) BRx_BA_MSK; /* set all BA bits */ - uint i; - - /* first set up bank 11 to reference the correct UPM at a dummy address */ - - memctl->memc_or11 = ORxU_AM_MSK; /* set all AM bits */ - - switch (upm) { - - case UPMA: - memctl->memc_br11 = - ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMA | - BRx_V; - memctl->memc_mamr = MxMR_OP_WARR; - break; - - case UPMB: - memctl->memc_br11 = - ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMB | - BRx_V; - memctl->memc_mbmr = MxMR_OP_WARR; - break; - - case UPMC: - memctl->memc_br11 = - ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMC | - BRx_V; - memctl->memc_mcmr = MxMR_OP_WARR; - break; - - default: - panic ("upmconfig passed invalid UPM number (%u)\n", upm); - break; - - } - - /* - * at this point, the dummy address is set up to access the selected UPM, - * the MAD pointer is zero, and the MxMR OP is set for writing to RAM - * - * now we simply load the mdr with each word and poke the dummy address. - * the MAD is incremented on each access. - */ - - for (i = 0; i < size; i++) { - memctl->memc_mdr = table[i]; - *dummy = 0; - } - - /* now kill bank 11 */ - memctl->memc_br11 = 0; -} - -/* ------------------------------------------------------------------------- */ - -#if !defined(CONFIG_HAVE_OWN_RESET) -int -do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - ulong msr, addr; - - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - immap->im_clkrst.car_rmr = RMR_CSRE; /* Checkstop Reset enable */ - - /* Interrupts and MMU off */ - __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); - - msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR); - __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); - - /* - * Trying to execute the next instruction at a non-existing address - * should cause a machine check, resulting in reset - */ -#ifdef CONFIG_SYS_RESET_ADDRESS - addr = CONFIG_SYS_RESET_ADDRESS; -#else - /* - * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE - * - sizeof (ulong) is usually a valid address. Better pick an address - * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS. - */ - addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong); -#endif - ((void (*)(void)) addr) (); - return 1; - -} -#endif /* CONFIG_HAVE_OWN_RESET */ - -/* ------------------------------------------------------------------------- */ - -/* - * Get timebase clock frequency (like cpu_clk in Hz) - * - */ -unsigned long get_tbclk (void) -{ - ulong tbclk; - - tbclk = (gd->bus_clk + 3L) / 4L; - - return (tbclk); -} - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_WATCHDOG) -void watchdog_reset (void) -{ - int re_enable = disable_interrupts (); - - reset_8260_watchdog ((immap_t *) CONFIG_SYS_IMMR); - if (re_enable) - enable_interrupts (); -} -#endif /* CONFIG_WATCHDOG */ - -/* ------------------------------------------------------------------------- */ -#ifdef CONFIG_OF_BOARD_SETUP -void ft_cpu_setup (void *blob, bd_t *bd) -{ - do_fixup_by_compat_u32(blob, "fsl,cpm2-brg", - "clock-frequency", bd->bi_brgfreq, 1); - - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "bus-frequency", bd->bi_busfreq, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "timebase-frequency", OF_TBCLK, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "clock-frequency", bd->bi_intfreq, 1); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); -} -#endif /* CONFIG_OF_BOARD_SETUP */ - -/* - * Initializes on-chip ethernet controllers. - * to override, implement board_eth_init() - */ -int cpu_eth_init(bd_t *bis) -{ -#if defined(CONFIG_ETHER_ON_FCC) - fec_initialize(bis); -#endif -#if defined(CONFIG_ETHER_ON_SCC) - mpc82xx_scc_enet_initialize(bis); -#endif - return 0; -} diff --git a/arch/powerpc/cpu/mpc8260/cpu_init.c b/arch/powerpc/cpu/mpc8260/cpu_init.c deleted file mode 100644 index 55130f7..0000000 --- a/arch/powerpc/cpu/mpc8260/cpu_init.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8260.h> -#include <asm/cpm_8260.h> -#include <ioports.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_BOARD_GET_CPU_CLK_F) -extern unsigned long board_get_cpu_clk_f (void); -#endif - -static void config_8260_ioports (volatile immap_t * immr) -{ - int portnum; - - for (portnum = 0; portnum < 4; portnum++) { - uint pmsk = 0, - ppar = 0, - psor = 0, - pdir = 0, - podr = 0, - pdat = 0; - iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0]; - iop_conf_t *eiopc = iopc + 32; - uint msk = 1; - - /* - * NOTE: - * index 0 refers to pin 31, - * index 31 refers to pin 0 - */ - while (iopc < eiopc) { - if (iopc->conf) { - pmsk |= msk; - if (iopc->ppar) - ppar |= msk; - if (iopc->psor) - psor |= msk; - if (iopc->pdir) - pdir |= msk; - if (iopc->podr) - podr |= msk; - if (iopc->pdat) - pdat |= msk; - } - - msk <<= 1; - iopc++; - } - - if (pmsk != 0) { - volatile ioport_t *iop = ioport_addr (immr, portnum); - uint tpmsk = ~pmsk; - - /* - * the (somewhat confused) paragraph at the - * bottom of page 35-5 warns that there might - * be "unknown behaviour" when programming - * PSORx and PDIRx, if PPARx = 1, so I - * decided this meant I had to disable the - * dedicated function first, and enable it - * last. - */ - iop->ppar &= tpmsk; - iop->psor = (iop->psor & tpmsk) | psor; - iop->podr = (iop->podr & tpmsk) | podr; - iop->pdat = (iop->pdat & tpmsk) | pdat; - iop->pdir = (iop->pdir & tpmsk) | pdir; - iop->ppar |= ppar; - } - } -} - -#define SET_VAL_MASK(a, b, mask) ((a & mask) | (b & ~mask)) -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers, - * initialize the UPM's - */ -void cpu_init_f (volatile immap_t * immr) -{ - uint sccr; -#if defined(CONFIG_BOARD_GET_CPU_CLK_F) - unsigned long cpu_clk; -#endif - volatile memctl8260_t *memctl = &immr->im_memctl; - extern void m8260_cpm_reset (void); - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - - /* RSR - Reset Status Register - clear all status (5-4) */ - gd->arch.reset_status = immr->im_clkrst.car_rsr; - immr->im_clkrst.car_rsr = RSR_ALLBITS; - - /* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */ - immr->im_clkrst.car_rmr = CONFIG_SYS_RMR; - - /* BCR - Bus Configuration Register (4-25) */ -#if defined(CONFIG_SYS_BCR_60x) && (CONFIG_SYS_BCR_SINGLE) - if (immr->im_siu_conf.sc_bcr & BCR_EBM) { - immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_60x, 0x80000010); - } else { - immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_SINGLE, 0x80000010); - } -#else - immr->im_siu_conf.sc_bcr = CONFIG_SYS_BCR; -#endif - - /* SIUMCR - contains debug pin configuration (4-31) */ -#if defined(CONFIG_SYS_SIUMCR_LOW) && (CONFIG_SYS_SIUMCR_HIGH) - cpu_clk = board_get_cpu_clk_f (); - if (cpu_clk >= 100000000) { - immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_HIGH, 0x9f3cc000); - } else { - immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_LOW, 0x9f3cc000); - } -#else - immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR; -#endif - - config_8260_ioports (immr); - - /* initialize time counter status and control register (4-40) */ - immr->im_sit.sit_tmcntsc = CONFIG_SYS_TMCNTSC; - - /* initialize the PIT (4-42) */ - immr->im_sit.sit_piscr = CONFIG_SYS_PISCR; - - /* System clock control register (9-8) */ - sccr = immr->im_clkrst.car_sccr & - (SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK); - immr->im_clkrst.car_sccr = sccr | - (CONFIG_SYS_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) ); - - /* - * Memory Controller: - */ - - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_OR0_REMAP) - memctl->memc_or0 = CONFIG_SYS_OR0_REMAP; -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - memctl->memc_or1 = CONFIG_SYS_OR1_REMAP; -#endif - - /* now restrict to preliminary range */ - /* the PS came from the HRCW, don't change it */ - memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK); - memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM; - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM; - memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM; - memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM; - memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM; - memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR8_PRELIM) && defined(CONFIG_SYS_OR8_PRELIM) - memctl->memc_or8 = CONFIG_SYS_OR8_PRELIM; - memctl->memc_br8 = CONFIG_SYS_BR8_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR9_PRELIM) && defined(CONFIG_SYS_OR9_PRELIM) - memctl->memc_or9 = CONFIG_SYS_OR9_PRELIM; - memctl->memc_br9 = CONFIG_SYS_BR9_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR10_PRELIM) && defined(CONFIG_SYS_OR10_PRELIM) - memctl->memc_or10 = CONFIG_SYS_OR10_PRELIM; - memctl->memc_br10 = CONFIG_SYS_BR10_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR11_PRELIM) && defined(CONFIG_SYS_OR11_PRELIM) - memctl->memc_or11 = CONFIG_SYS_OR11_PRELIM; - memctl->memc_br11 = CONFIG_SYS_BR11_PRELIM; -#endif - - m8260_cpm_reset (); -} - -/* - * initialize higher level parts of CPU like time base and timers - */ -int cpu_init_r (void) -{ - volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base; - - immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR; - - return (0); -} - -/* - * print out the reason for the reset - */ -int prt_8260_rsr (void) -{ - static struct { - ulong mask; - char *desc; - } bits[] = { - { - RSR_JTRS, "JTAG"}, { - RSR_CSRS, "Check Stop"}, { - RSR_SWRS, "Software Watchdog"}, { - RSR_BMRS, "Bus Monitor"}, { - RSR_ESRS, "External Soft"}, { - RSR_EHRS, "External Hard"} - }; - static int n = ARRAY_SIZE(bits); - ulong rsr = gd->arch.reset_status; - int i; - char *sep; - - puts (CPU_ID_STR " Reset Status:"); - - sep = " "; - for (i = 0; i < n; i++) - if (rsr & bits[i].mask) { - printf ("%s%s", sep, bits[i].desc); - sep = ", "; - } - - puts ("\n\n"); - return (0); -} diff --git a/arch/powerpc/cpu/mpc8260/ether_fcc.c b/arch/powerpc/cpu/mpc8260/ether_fcc.c deleted file mode 100644 index 072eb76..0000000 --- a/arch/powerpc/cpu/mpc8260/ether_fcc.c +++ /dev/null @@ -1,1155 +0,0 @@ -/* - * MPC8260 FCC Fast Ethernet - * - * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net) - * - * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * MPC8260 FCC Fast Ethernet - * Basic ET HW initialization and packet RX/TX routines - * - * This code will not perform the IO port configuration. This should be - * done in the iop_conf_t structure specific for the board. - * - * TODO: - * add a PHY driver to do the negotiation - * reflect negotiation results in FPSMR - * look for ways to configure the board specific stuff elsewhere, eg. - * config_xxx.h or the board directory - */ - -#include <common.h> -#include <console.h> -#include <malloc.h> -#include <asm/cpm_8260.h> -#include <mpc8260.h> -#include <command.h> -#include <config.h> -#include <net.h> - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) -#include <miiphy.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) - -static struct ether_fcc_info_s -{ - int ether_index; - int proff_enet; - ulong cpm_cr_enet_sblock; - ulong cpm_cr_enet_page; - ulong cmxfcr_mask; - ulong cmxfcr_value; -} - ether_fcc_info[] = -{ -#ifdef CONFIG_ETHER_ON_FCC1 -{ - 0, - PROFF_FCC1, - CPM_CR_FCC1_SBLOCK, - CPM_CR_FCC1_PAGE, - CONFIG_SYS_CMXFCR_MASK1, - CONFIG_SYS_CMXFCR_VALUE1 -}, -#endif - -#ifdef CONFIG_ETHER_ON_FCC2 -{ - 1, - PROFF_FCC2, - CPM_CR_FCC2_SBLOCK, - CPM_CR_FCC2_PAGE, - CONFIG_SYS_CMXFCR_MASK2, - CONFIG_SYS_CMXFCR_VALUE2 -}, -#endif - -#ifdef CONFIG_ETHER_ON_FCC3 -{ - 2, - PROFF_FCC3, - CPM_CR_FCC3_SBLOCK, - CPM_CR_FCC3_PAGE, - CONFIG_SYS_CMXFCR_MASK3, - CONFIG_SYS_CMXFCR_VALUE3 -}, -#endif -}; - -/*---------------------------------------------------------------------*/ - -/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */ -#define PKT_MAXDMA_SIZE 1520 - -/* The FCC stores dest/src/type, data, and checksum for receive packets. */ -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 - -/* Maximum input buffer size. Must be a multiple of 32. */ -#define PKT_MAXBLR_SIZE 1536 - -#define TOUT_LOOP 1000000 - -#define TX_BUF_CNT 2 -#ifdef __GNUC__ -static char txbuf[TX_BUF_CNT][PKT_MAXBLR_SIZE] __attribute__ ((aligned(8))); -#else -#error "txbuf must be 64-bit aligned" -#endif - -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -/* - * FCC Ethernet Tx and Rx buffer descriptors. - * Provide for Double Buffering - * Note: PKTBUFSRX is defined in net.h - */ - -typedef volatile struct rtxbd { - cbd_t rxbd[PKTBUFSRX]; - cbd_t txbd[TX_BUF_CNT]; -} RTXBD; - -/* Good news: the FCC supports external BDs! */ -#ifdef __GNUC__ -static RTXBD rtx __attribute__ ((aligned(8))); -#else -#error "rtx must be 64-bit aligned" -#endif - -static int fec_send(struct eth_device *dev, void *packet, int length) -{ - int i; - int result = 0; - - if (length <= 0) { - printf("fec: bad packet size: %d\n", length); - goto out; - } - - for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { - if (i >= TOUT_LOOP) { - puts ("fec: tx buffer not ready\n"); - goto out; - } - } - - rtx.txbd[txIdx].cbd_bufaddr = (uint)packet; - rtx.txbd[txIdx].cbd_datlen = length; - rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | - BD_ENET_TX_WRAP); - - for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { - if (i >= TOUT_LOOP) { - puts ("fec: tx error\n"); - goto out; - } - } - -#ifdef ET_DEBUG - printf("cycles: %d status: %04x\n", i, rtx.txbd[txIdx].cbd_sc); -#endif - - /* return only status bits */ - result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS; - -out: - return result; -} - -static int fec_recv(struct eth_device* dev) -{ - int length; - - for (;;) - { - if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - length = rtx.rxbd[rxIdx].cbd_datlen; - - if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) { - printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc); - } - else { - /* Pass the packet up to the protocol layers. */ - net_process_received_packet(net_rx_packets[rxIdx], length - 4); - } - - - /* Give the buffer back to the FCC. */ - rtx.rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); - rxIdx = 0; - } - else { - rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - } - return length; -} - - -static int fec_init(struct eth_device* dev, bd_t *bis) -{ - struct ether_fcc_info_s * info = dev->priv; - int i; - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8260_t *cp = &(immr->im_cpm); - fcc_enet_t *pram_ptr; - unsigned long mem_addr; - -#if 0 - mii_discover_phy(); -#endif - - /* 28.9 - (1-2): ioports have been set up already */ - - /* 28.9 - (3): connect FCC's tx and rx clocks */ - immr->im_cpmux.cmx_uar = 0; - immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~info->cmxfcr_mask) | - info->cmxfcr_value; - - /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */ - immr->im_fcc[info->ether_index].fcc_gfmr = - FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; - - /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */ - immr->im_fcc[info->ether_index].fcc_fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC; - - /* 28.9 - (6): FDSR: Ethernet Syn */ - immr->im_fcc[info->ether_index].fcc_fdsr = 0xD555; - - /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */ - rxIdx = 0; - txIdx = 0; - - /* Setup Receiver Buffer Descriptors */ - for (i = 0; i < PKTBUFSRX; i++) - { - rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx.rxbd[i].cbd_datlen = 0; - rtx.rxbd[i].cbd_bufaddr = (uint)net_rx_packets[i]; - } - rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* Setup Ethernet Transmitter Buffer Descriptors */ - for (i = 0; i < TX_BUF_CNT; i++) - { - rtx.txbd[i].cbd_sc = (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC); - rtx.txbd[i].cbd_datlen = 0; - rtx.txbd[i].cbd_bufaddr = (uint)&txbuf[i][0]; - } - rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* 28.9 - (7): initialise parameter ram */ - pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[info->proff_enet]); - - /* clear whole structure to make sure all reserved fields are zero */ - memset((void*)pram_ptr, 0, sizeof(fcc_enet_t)); - - /* - * common Parameter RAM area - * - * Allocate space in the reserved FCC area of DPRAM for the - * internal buffers. No one uses this space (yet), so we - * can do this. Later, we will add resource management for - * this area. - */ - mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64); - pram_ptr->fen_genfcc.fcc_riptr = mem_addr; - pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32; - /* - * Set maximum bytes per receive buffer. - * It must be a multiple of 32. - */ - pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; - pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB | - CONFIG_SYS_CPMFCR_RAMTYPE) << 24; - pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]); - pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB | - CONFIG_SYS_CPMFCR_RAMTYPE) << 24; - pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]); - - /* protocol-specific area */ - pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */ - pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */ - pram_ptr->fen_retlim = 15; /* Retry limit threshold */ - pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */ - /* - * Set Ethernet station address. - * - * This is supplied in the board information structure, so we - * copy that into the controller. - * So, far we have only been given one Ethernet address. We make - * it unique by setting a few bits in the upper byte of the - * non-static part of the address. - */ -#define ea eth_get_ethaddr() - pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4]; - pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2]; - pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0]; -#undef ea - pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */ - /* pad pointer. use tiptr since we don't need a specific padding char */ - pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr; - pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */ - pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */ - pram_ptr->fen_rfthr = 1; - pram_ptr->fen_rfcnt = 1; -#if 0 - printf("pram_ptr->fen_genfcc.fcc_rbase %08lx\n", - pram_ptr->fen_genfcc.fcc_rbase); - printf("pram_ptr->fen_genfcc.fcc_tbase %08lx\n", - pram_ptr->fen_genfcc.fcc_tbase); -#endif - - /* 28.9 - (8): clear out events in FCCE */ - immr->im_fcc[info->ether_index].fcc_fcce = ~0x0; - - /* 28.9 - (9): FCCM: mask all events */ - immr->im_fcc[info->ether_index].fcc_fccm = 0; - - /* 28.9 - (10-12): we don't use ethernet interrupts */ - - /* 28.9 - (13) - * - * Let's re-initialize the channel now. We have to do it later - * than the manual describes because we have just now finished - * the BD initialization. - */ - cp->cp_cpcr = mk_cr_cmd(info->cpm_cr_enet_page, - info->cpm_cr_enet_sblock, - 0x0c, - CPM_CR_INIT_TRX) | CPM_CR_FLG; - do { - __asm__ __volatile__ ("eieio"); - } while (cp->cp_cpcr & CPM_CR_FLG); - - /* 28.9 - (14): enable tx/rx in gfmr */ - immr->im_fcc[info->ether_index].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; - - return 1; -} - -static void fec_halt(struct eth_device* dev) -{ - struct ether_fcc_info_s * info = dev->priv; - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - - /* write GFMR: disable tx/rx */ - immr->im_fcc[info->ether_index].fcc_gfmr &= - ~(FCC_GFMR_ENT | FCC_GFMR_ENR); -} - -int fec_initialize(bd_t *bis) -{ - struct eth_device* dev; - int i; - - for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++) - { - dev = (struct eth_device*) malloc(sizeof *dev); - memset(dev, 0, sizeof *dev); - - sprintf(dev->name, "FCC%d", - ether_fcc_info[i].ether_index + 1); - dev->priv = ðer_fcc_info[i]; - dev->init = fec_init; - dev->halt = fec_halt; - dev->send = fec_send; - dev->recv = fec_recv; - - eth_register(dev); - -#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \ - && defined(CONFIG_BITBANGMII) - int retval; - struct mii_dev *mdiodev = mdio_alloc(); - if (!mdiodev) - return -ENOMEM; - strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN); - mdiodev->read = bb_miiphy_read; - mdiodev->write = bb_miiphy_write; - - retval = mdio_register(mdiodev); - if (retval < 0) - return retval; -#endif - } - - return 1; -} - -#ifdef CONFIG_ETHER_LOOPBACK_TEST - -#define ELBT_BUFSZ 1024 /* must be multiple of 32 */ - -#define ELBT_CRCSZ 4 - -#define ELBT_NRXBD 4 /* must be at least 2 */ -#define ELBT_NTXBD 4 - -#define ELBT_MAXRXERR 32 -#define ELBT_MAXTXERR 32 - -#define ELBT_CLSWAIT 1000 /* msec to wait for further input frames */ - -typedef - struct { - uint off; - char *lab; - } -elbt_prdesc; - -typedef - struct { - uint _l, _f, m, bc, mc, lg, no, sh, cr, ov, cl; - uint badsrc, badtyp, badlen, badbit; - } -elbt_rxeacc; - -static elbt_prdesc rxeacc_descs[] = { - { offsetof(elbt_rxeacc, _l), "Not Last in Frame" }, - { offsetof(elbt_rxeacc, _f), "Not First in Frame" }, - { offsetof(elbt_rxeacc, m), "Address Miss" }, - { offsetof(elbt_rxeacc, bc), "Broadcast Address" }, - { offsetof(elbt_rxeacc, mc), "Multicast Address" }, - { offsetof(elbt_rxeacc, lg), "Frame Length Violation"}, - { offsetof(elbt_rxeacc, no), "Non-Octet Alignment" }, - { offsetof(elbt_rxeacc, sh), "Short Frame" }, - { offsetof(elbt_rxeacc, cr), "CRC Error" }, - { offsetof(elbt_rxeacc, ov), "Overrun" }, - { offsetof(elbt_rxeacc, cl), "Collision" }, - { offsetof(elbt_rxeacc, badsrc), "Bad Src Address" }, - { offsetof(elbt_rxeacc, badtyp), "Bad Frame Type" }, - { offsetof(elbt_rxeacc, badlen), "Bad Frame Length" }, - { offsetof(elbt_rxeacc, badbit), "Data Compare Errors" }, -}; -static int rxeacc_ndesc = ARRAY_SIZE(rxeacc_descs); - -typedef - struct { - uint def, hb, lc, rl, rc, un, csl; - } -elbt_txeacc; - -static elbt_prdesc txeacc_descs[] = { - { offsetof(elbt_txeacc, def), "Defer Indication" }, - { offsetof(elbt_txeacc, hb), "Heartbeat" }, - { offsetof(elbt_txeacc, lc), "Late Collision" }, - { offsetof(elbt_txeacc, rl), "Retransmission Limit" }, - { offsetof(elbt_txeacc, rc), "Retry Count" }, - { offsetof(elbt_txeacc, un), "Underrun" }, - { offsetof(elbt_txeacc, csl), "Carrier Sense Lost" }, -}; -static int txeacc_ndesc = ARRAY_SIZE(txeacc_descs); - -typedef - struct { - uchar rxbufs[ELBT_NRXBD][ELBT_BUFSZ]; - uchar txbufs[ELBT_NTXBD][ELBT_BUFSZ]; - cbd_t rxbd[ELBT_NRXBD]; - cbd_t txbd[ELBT_NTXBD]; - enum { Idle, Running, Closing, Closed } state; - int proff, page, sblock; - uint clstime, nsent, ntxerr, nrcvd, nrxerr; - ushort rxerrs[ELBT_MAXRXERR], txerrs[ELBT_MAXTXERR]; - elbt_rxeacc rxeacc; - elbt_txeacc txeacc; - } __attribute__ ((aligned(8))) -elbt_chan; - -static uchar patbytes[ELBT_NTXBD] = { - 0xff, 0xaa, 0x55, 0x00 -}; -static uint patwords[ELBT_NTXBD] = { - 0xffffffff, 0xaaaaaaaa, 0x55555555, 0x00000000 -}; - -#ifdef __GNUC__ -static elbt_chan elbt_chans[3] __attribute__ ((aligned(8))); -#else -#error "elbt_chans must be 64-bit aligned" -#endif - -#define CPM_CR_GRACEFUL_STOP_TX ((ushort)0x0005) - -static elbt_prdesc epram_descs[] = { - { offsetof(fcc_enet_t, fen_crcec), "CRC Errors" }, - { offsetof(fcc_enet_t, fen_alec), "Alignment Errors" }, - { offsetof(fcc_enet_t, fen_disfc), "Discarded Frames" }, - { offsetof(fcc_enet_t, fen_octc), "Octets" }, - { offsetof(fcc_enet_t, fen_colc), "Collisions" }, - { offsetof(fcc_enet_t, fen_broc), "Broadcast Frames" }, - { offsetof(fcc_enet_t, fen_mulc), "Multicast Frames" }, - { offsetof(fcc_enet_t, fen_uspc), "Undersize Frames" }, - { offsetof(fcc_enet_t, fen_frgc), "Fragments" }, - { offsetof(fcc_enet_t, fen_ospc), "Oversize Frames" }, - { offsetof(fcc_enet_t, fen_jbrc), "Jabbers" }, - { offsetof(fcc_enet_t, fen_p64c), "64 Octet Frames" }, - { offsetof(fcc_enet_t, fen_p65c), "65-127 Octet Frames" }, - { offsetof(fcc_enet_t, fen_p128c), "128-255 Octet Frames" }, - { offsetof(fcc_enet_t, fen_p256c), "256-511 Octet Frames" }, - { offsetof(fcc_enet_t, fen_p512c), "512-1023 Octet Frames" }, - { offsetof(fcc_enet_t, fen_p1024c), "1024-1518 Octet Frames"}, -}; -static int epram_ndesc = ARRAY_SIZE(epram_descs); - -/* - * given an elbt_prdesc array and an array of base addresses, print - * each prdesc down the screen with the values fetched from each - * base address across the screen - */ -static void -print_desc (elbt_prdesc descs[], int ndesc, uchar *bases[], int nbase) -{ - elbt_prdesc *dp = descs, *edp = dp + ndesc; - int i; - - printf ("%32s", ""); - - for (i = 0; i < nbase; i++) - printf (" Channel %d", i); - - putc ('\n'); - - while (dp < edp) { - - printf ("%-32s", dp->lab); - - for (i = 0; i < nbase; i++) { - uint val = *(uint *)(bases[i] + dp->off); - - printf (" %10u", val); - } - - putc ('\n'); - - dp++; - } -} - -/* - * return number of bits that are set in a value; value contains - * nbits (right-justified) bits. - */ -static uint __inline__ -nbs (uint value, uint nbits) -{ - uint cnt = 0; -#if 1 - uint pos = sizeof (uint) * 8; - - __asm__ __volatile__ ("\ - mtctr %2\n\ -1: rlwnm. %2,%1,%4,31,31\n\ - beq 2f\n\ - addi %0,%0,1\n\ -2: subi %4,%4,1\n\ - bdnz 1b" - : "=r"(cnt) - : "r"(value), "r"(nbits), "r"(cnt), "r"(pos) - : "ctr", "cc" ); -#else - uint mask = 1; - - do { - if (value & mask) - cnt++; - mask <<= 1; - } while (--nbits); -#endif - - return (cnt); -} - -static ulong -badbits (uchar *bp, int n, ulong pat) -{ - ulong *lp, cnt = 0; - int nl; - - while (n > 0 && ((ulong)bp & (sizeof (ulong) - 1)) != 0) { - uchar diff; - - diff = *bp++ ^ (uchar)pat; - - if (diff) - cnt += nbs ((ulong)diff, 8); - - n--; - } - - lp = (ulong *)bp; - nl = n / sizeof (ulong); - n -= nl * sizeof (ulong); - - while (nl > 0) { - ulong diff; - - diff = *lp++ ^ pat; - - if (diff) - cnt += nbs (diff, 32); - - nl--; - } - - bp = (uchar *)lp; - - while (n > 0) { - uchar diff; - - diff = *bp++ ^ (uchar)pat; - - if (diff) - cnt += nbs ((ulong)diff, 8); - - n--; - } - - return (cnt); -} - -static inline unsigned short -swap16 (unsigned short x) -{ - return (((x & 0xff) << 8) | ((x & 0xff00) >> 8)); -} - -/* broadcast is not an error - we send them like that */ -#define BD_ENET_RX_ERRS (BD_ENET_RX_STATS & ~BD_ENET_RX_BC) - -void -eth_loopback_test (void) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8260_t *cp = &(immr->im_cpm); - int c, nclosed; - ulong runtime, nmsec; - uchar *bases[3]; - - puts ("FCC Ethernet External loopback test\n"); - - eth_getenv_enetaddr("ethaddr", net_ethaddr); - - /* - * global initialisations for all FCC channels - */ - - /* 28.9 - (1-2): ioports have been set up already */ - -#if defined(CONFIG_SACSng) - /* - * Attention: this is board-specific - * 1, FCC2 - */ -# define FCC_START_LOOP 1 -# define FCC_END_LOOP 1 - - /* - * Attention: this is board-specific - * - FCC2 Rx-CLK is CLK13 - * - FCC2 Tx-CLK is CLK14 - */ - - /* 28.9 - (3): connect FCC's tx and rx clocks */ - immr->im_cpmux.cmx_uar = 0; - immr->im_cpmux.cmx_fcr = CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14; -#else -#error "eth_loopback_test not supported on your board" -#endif - - puts ("Initialise FCC channels:"); - - for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) { - elbt_chan *ecp = &elbt_chans[c]; - volatile fcc_t *fcp = &immr->im_fcc[c]; - volatile fcc_enet_t *fpp; - int i; - ulong addr; - - /* - * initialise channel data - */ - - printf (" %d", c); - - memset ((void *)ecp, 0, sizeof (*ecp)); - - ecp->state = Idle; - - switch (c) { - - case 0: /* FCC1 */ - ecp->proff = PROFF_FCC1; - ecp->page = CPM_CR_FCC1_PAGE; - ecp->sblock = CPM_CR_FCC1_SBLOCK; - break; - - case 1: /* FCC2 */ - ecp->proff = PROFF_FCC2; - ecp->page = CPM_CR_FCC2_PAGE; - ecp->sblock = CPM_CR_FCC2_SBLOCK; - break; - - case 2: /* FCC3 */ - ecp->proff = PROFF_FCC3; - ecp->page = CPM_CR_FCC3_PAGE; - ecp->sblock = CPM_CR_FCC3_SBLOCK; - break; - } - - /* - * set up tx buffers and bds - */ - - for (i = 0; i < ELBT_NTXBD; i++) { - cbd_t *bdp = &ecp->txbd[i]; - uchar *bp = &ecp->txbufs[i][0]; - - bdp->cbd_bufaddr = (uint)bp; - /* room for crc */ - bdp->cbd_datlen = ELBT_BUFSZ - ELBT_CRCSZ; - bdp->cbd_sc = BD_ENET_TX_READY | BD_ENET_TX_PAD | \ - BD_ENET_TX_LAST | BD_ENET_TX_TC; - - memset((void *)bp, patbytes[i], ELBT_BUFSZ); - net_set_ether(bp, net_bcast_ethaddr, 0x8000); - } - ecp->txbd[ELBT_NTXBD - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* - * set up rx buffers and bds - */ - - for (i = 0; i < ELBT_NRXBD; i++) { - cbd_t *bdp = &ecp->rxbd[i]; - uchar *bp = &ecp->rxbufs[i][0]; - - bdp->cbd_bufaddr = (uint)bp; - bdp->cbd_datlen = 0; - bdp->cbd_sc = BD_ENET_RX_EMPTY; - - memset ((void *)bp, 0, ELBT_BUFSZ); - } - ecp->rxbd[ELBT_NRXBD - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* - * set up the FCC channel hardware - */ - - /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */ - fcp->fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; - - /* 28.9 - (5): FPSMR: fd, enet CRC, Promis, RMON, Rx SHort */ - fcp->fcc_fpsmr = FCC_PSMR_FDE | FCC_PSMR_LPB | \ - FCC_PSMR_ENCRC | FCC_PSMR_PRO | \ - FCC_PSMR_MON | FCC_PSMR_RSH; - - /* 28.9 - (6): FDSR: Ethernet Syn */ - fcp->fcc_fdsr = 0xD555; - - /* 29.9 - (7): initialise parameter ram */ - fpp = (fcc_enet_t *)&(immr->im_dprambase[ecp->proff]); - - /* clear whole struct to make sure all resv fields are zero */ - memset ((void *)fpp, 0, sizeof (fcc_enet_t)); - - /* - * common Parameter RAM area - * - * Allocate space in the reserved FCC area of DPRAM for the - * internal buffers. No one uses this space (yet), so we - * can do this. Later, we will add resource management for - * this area. - */ - addr = CPM_FCC_SPECIAL_BASE + (c * 64); - fpp->fen_genfcc.fcc_riptr = addr; - fpp->fen_genfcc.fcc_tiptr = addr + 32; - - /* - * Set maximum bytes per receive buffer. - * It must be a multiple of 32. - * buffers are in 60x bus memory. - */ - fpp->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; - fpp->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24; - fpp->fen_genfcc.fcc_rbase = (unsigned int)(&ecp->rxbd[0]); - fpp->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24; - fpp->fen_genfcc.fcc_tbase = (unsigned int)(&ecp->txbd[0]); - - /* protocol-specific area */ - fpp->fen_cmask = 0xdebb20e3; /* CRC mask */ - fpp->fen_cpres = 0xffffffff; /* CRC preset */ - fpp->fen_retlim = 15; /* Retry limit threshold */ - fpp->fen_mflr = PKT_MAXBUF_SIZE;/* max frame length register */ - - /* - * Set Ethernet station address. - * - * This is supplied in the board information structure, so we - * copy that into the controller. - * So, far we have only been given one Ethernet address. We use - * the same address for all channels - */ - fpp->fen_paddrh = (net_ethaddr[5] << 8) + net_ethaddr[4]; - fpp->fen_paddrm = (net_ethaddr[3] << 8) + net_ethaddr[2]; - fpp->fen_paddrl = (net_ethaddr[1] << 8) + net_ethaddr[0]; - - fpp->fen_minflr = PKT_MINBUF_SIZE; /* min frame len register */ - /* - * pad pointer. use tiptr since we don't need - * a specific padding char - */ - fpp->fen_padptr = fpp->fen_genfcc.fcc_tiptr; - fpp->fen_maxd1 = PKT_MAXDMA_SIZE; /* max DMA1 length */ - fpp->fen_maxd2 = PKT_MAXDMA_SIZE; /* max DMA2 length */ - fpp->fen_rfthr = 1; - fpp->fen_rfcnt = 1; - - /* 28.9 - (8): clear out events in FCCE */ - fcp->fcc_fcce = ~0x0; - - /* 28.9 - (9): FCCM: mask all events */ - fcp->fcc_fccm = 0; - - /* 28.9 - (10-12): we don't use ethernet interrupts */ - - /* 28.9 - (13) - * - * Let's re-initialize the channel now. We have to do it later - * than the manual describes because we have just now finished - * the BD initialization. - */ - cp->cp_cpcr = mk_cr_cmd (ecp->page, ecp->sblock, \ - 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG; - do { - __asm__ __volatile__ ("eieio"); - } while (cp->cp_cpcr & CPM_CR_FLG); - } - - puts (" done\nStarting test... (Ctrl-C to Finish)\n"); - - /* - * Note: don't want serial output from here until the end of the - * test - the delays would probably stuff things up. - */ - - clear_ctrlc (); - runtime = get_timer (0); - - do { - nclosed = 0; - - for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) { - volatile fcc_t *fcp = &immr->im_fcc[c]; - elbt_chan *ecp = &elbt_chans[c]; - int i; - - switch (ecp->state) { - - case Idle: - /* - * set the channel Running ... - */ - - /* 28.9 - (14): enable tx/rx in gfmr */ - fcp->fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; - - ecp->state = Running; - break; - - case Running: - /* - * (while Running only) check for - * termination of the test - */ - - (void)ctrlc (); - - if (had_ctrlc ()) { - /* - * initiate a "graceful stop transmit" - * on the channel - */ - cp->cp_cpcr = mk_cr_cmd (ecp->page, \ - ecp->sblock, 0x0c, \ - CPM_CR_GRACEFUL_STOP_TX) | \ - CPM_CR_FLG; - do { - __asm__ __volatile__ ("eieio"); - } while (cp->cp_cpcr & CPM_CR_FLG); - - ecp->clstime = get_timer (0); - ecp->state = Closing; - } - /* fall through ... */ - - case Closing: - /* - * (while Running or Closing) poll the channel: - * - check for any non-READY tx buffers and - * make them ready - * - check for any non-EMPTY rx buffers and - * check that they were received correctly, - * adjust counters etc, then make empty - */ - - for (i = 0; i < ELBT_NTXBD; i++) { - cbd_t *bdp = &ecp->txbd[i]; - ushort sc = bdp->cbd_sc; - - if ((sc & BD_ENET_TX_READY) != 0) - continue; - - /* - * this frame has finished - * transmitting - */ - ecp->nsent++; - - if (sc & BD_ENET_TX_STATS) { - ulong n; - - /* - * we had an error on - * the transmission - */ - n = ecp->ntxerr++; - if (n < ELBT_MAXTXERR) - ecp->txerrs[n] = sc; - - if (sc & BD_ENET_TX_DEF) - ecp->txeacc.def++; - if (sc & BD_ENET_TX_HB) - ecp->txeacc.hb++; - if (sc & BD_ENET_TX_LC) - ecp->txeacc.lc++; - if (sc & BD_ENET_TX_RL) - ecp->txeacc.rl++; - if (sc & BD_ENET_TX_RCMASK) - ecp->txeacc.rc++; - if (sc & BD_ENET_TX_UN) - ecp->txeacc.un++; - if (sc & BD_ENET_TX_CSL) - ecp->txeacc.csl++; - - bdp->cbd_sc &= \ - ~BD_ENET_TX_STATS; - } - - if (ecp->state == Closing) - ecp->clstime = get_timer (0); - - /* make it ready again */ - bdp->cbd_sc |= BD_ENET_TX_READY; - } - - for (i = 0; i < ELBT_NRXBD; i++) { - cbd_t *bdp = &ecp->rxbd[i]; - ushort sc = bdp->cbd_sc, mask; - - if ((sc & BD_ENET_RX_EMPTY) != 0) - continue; - - /* we have a new frame in this buffer */ - ecp->nrcvd++; - - mask = BD_ENET_RX_LAST|BD_ENET_RX_FIRST; - if ((sc & mask) != mask) { - /* somethings wrong here ... */ - if (!(sc & BD_ENET_RX_LAST)) - ecp->rxeacc._l++; - if (!(sc & BD_ENET_RX_FIRST)) - ecp->rxeacc._f++; - } - - if (sc & BD_ENET_RX_ERRS) { - ulong n; - - /* - * we had some sort of error - * on the frame - */ - n = ecp->nrxerr++; - if (n < ELBT_MAXRXERR) - ecp->rxerrs[n] = sc; - - if (sc & BD_ENET_RX_MISS) - ecp->rxeacc.m++; - if (sc & BD_ENET_RX_BC) - ecp->rxeacc.bc++; - if (sc & BD_ENET_RX_MC) - ecp->rxeacc.mc++; - if (sc & BD_ENET_RX_LG) - ecp->rxeacc.lg++; - if (sc & BD_ENET_RX_NO) - ecp->rxeacc.no++; - if (sc & BD_ENET_RX_SH) - ecp->rxeacc.sh++; - if (sc & BD_ENET_RX_CR) - ecp->rxeacc.cr++; - if (sc & BD_ENET_RX_OV) - ecp->rxeacc.ov++; - if (sc & BD_ENET_RX_CL) - ecp->rxeacc.cl++; - - bdp->cbd_sc &= \ - ~BD_ENET_RX_ERRS; - } - else { - ushort datlen = bdp->cbd_datlen; - struct ethernet_hdr *ehp; - ushort prot; - int ours, tb, n, nbytes; - - ehp = (struct ethernet_hdr *) \ - &ecp->rxbufs[i][0]; - - ours = memcmp (ehp->et_src, \ - net_ethaddr, 6); - - prot = swap16 (ehp->et_protlen); - tb = prot & 0x8000; - n = prot & 0x7fff; - - nbytes = ELBT_BUFSZ - - ETHER_HDR_SIZE - - ELBT_CRCSZ; - - /* check the frame is correct */ - if (datlen != ELBT_BUFSZ) - ecp->rxeacc.badlen++; - else if (!ours) - ecp->rxeacc.badsrc++; - else if (!tb || n >= ELBT_NTXBD) - ecp->rxeacc.badtyp++; - else { - ulong patword = \ - patwords[n]; - uint nbb; - - nbb = badbits( - ((uchar *)&ehp) + - ETHER_HDR_SIZE, - nbytes, patword); - - ecp->rxeacc.badbit += \ - nbb; - } - } - - if (ecp->state == Closing) - ecp->clstime = get_timer (0); - - /* make it empty again */ - bdp->cbd_sc |= BD_ENET_RX_EMPTY; - } - - if (ecp->state != Closing) - break; - - /* - * (while Closing) check to see if - * waited long enough - */ - - if (get_timer (ecp->clstime) >= ELBT_CLSWAIT) { - /* write GFMR: disable tx/rx */ - fcp->fcc_gfmr &= \ - ~(FCC_GFMR_ENT | FCC_GFMR_ENR); - ecp->state = Closed; - } - - break; - - case Closed: - nclosed++; - break; - } - } - - } while (nclosed < (FCC_END_LOOP - FCC_START_LOOP + 1)); - - runtime = get_timer (runtime); - if (runtime <= ELBT_CLSWAIT) { - printf ("Whoops! somehow elapsed time (%ld) is wrong (<= %d)\n", - runtime, ELBT_CLSWAIT); - return; - } - nmsec = runtime - ELBT_CLSWAIT; - - printf ("Test Finished in %ldms (plus %dms close wait period)!\n\n", - nmsec, ELBT_CLSWAIT); - - /* - * now print stats - */ - - for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) { - elbt_chan *ecp = &elbt_chans[c]; - uint rxpps, txpps, nerr; - - rxpps = (ecp->nrcvd * 1000) / nmsec; - txpps = (ecp->nsent * 1000) / nmsec; - - printf ("Channel %d: %d rcvd (%d pps, %d rxerrs), " - "%d sent (%d pps, %d txerrs)\n\n", c, - ecp->nrcvd, rxpps, ecp->nrxerr, - ecp->nsent, txpps, ecp->ntxerr); - - if ((nerr = ecp->nrxerr) > 0) { - ulong i; - - printf ("\tFirst %d rx errs:", nerr); - for (i = 0; i < nerr; i++) - printf (" %04x", ecp->rxerrs[i]); - putc ('\n'); - } - - if ((nerr = ecp->ntxerr) > 0) { - ulong i; - - printf ("\tFirst %d tx errs:", nerr); - for (i = 0; i < nerr; i++) - printf (" %04x", ecp->txerrs[i]); - putc ('\n'); - } - } - - puts ("Receive Error Counts:\n"); - for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) - bases[c] = (uchar *)&elbt_chans[c].rxeacc; - print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3); - - puts ("\nTransmit Error Counts:\n"); - for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) - bases[c] = (uchar *)&elbt_chans[c].txeacc; - print_desc (txeacc_descs, txeacc_ndesc, bases, 3); - - puts ("\nRMON(-like) Counters:\n"); - for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) - bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff]; - print_desc (epram_descs, epram_ndesc, bases, 3); -} - -#endif /* CONFIG_ETHER_LOOPBACK_TEST */ - -#endif diff --git a/arch/powerpc/cpu/mpc8260/ether_scc.c b/arch/powerpc/cpu/mpc8260/ether_scc.c deleted file mode 100644 index fff8f2b..0000000 --- a/arch/powerpc/cpu/mpc8260/ether_scc.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * MPC8260 SCC Ethernet - * - * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net) - * - * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright (c) 2001 - * Advent Networks, Inc. http://www.adventnetworks.com - * Jay Monkman jtm@smoothsmoothie.com - * - * Modified so that it plays nicely when more than one ETHERNET interface - * is in use a la ether_fcc.c. - * (C) Copyright 2008 - * DENX Software Engineerin GmbH - * Gary Jennejohn garyj@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/cpm_8260.h> -#include <mpc8260.h> -#include <malloc.h> -#include <net.h> -#include <command.h> -#include <config.h> - -#if (CONFIG_ETHER_INDEX == 1) -# define PROFF_ENET PROFF_SCC1 -# define CPM_CR_ENET_PAGE CPM_CR_SCC1_PAGE -# define CPM_CR_ENET_SBLOCK CPM_CR_SCC1_SBLOCK -# define CMXSCR_MASK (CMXSCR_SC1 |\ - CMXSCR_RS1CS_MSK |\ - CMXSCR_TS1CS_MSK) - -#elif (CONFIG_ETHER_INDEX == 2) -# define PROFF_ENET PROFF_SCC2 -# define CPM_CR_ENET_PAGE CPM_CR_SCC2_PAGE -# define CPM_CR_ENET_SBLOCK CPM_CR_SCC2_SBLOCK -# define CMXSCR_MASK (CMXSCR_SC2 |\ - CMXSCR_RS2CS_MSK |\ - CMXSCR_TS2CS_MSK) - -#elif (CONFIG_ETHER_INDEX == 3) -# define PROFF_ENET PROFF_SCC3 -# define CPM_CR_ENET_PAGE CPM_CR_SCC3_PAGE -# define CPM_CR_ENET_SBLOCK CPM_CR_SCC3_SBLOCK -# define CMXSCR_MASK (CMXSCR_SC3 |\ - CMXSCR_RS3CS_MSK |\ - CMXSCR_TS3CS_MSK) -#elif (CONFIG_ETHER_INDEX == 4) -# define PROFF_ENET PROFF_SCC4 -# define CPM_CR_ENET_PAGE CPM_CR_SCC4_PAGE -# define CPM_CR_ENET_SBLOCK CPM_CR_SCC4_SBLOCK -# define CMXSCR_MASK (CMXSCR_SC4 |\ - CMXSCR_RS4CS_MSK |\ - CMXSCR_TS4CS_MSK) - -#endif - - -/* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -#if !defined(CONFIG_SYS_SCC_TOUT_LOOP) - #define CONFIG_SYS_SCC_TOUT_LOOP 1000000 -#endif - -static char txbuf[TX_BUF_CNT][ DBUF_LENGTH ]; - -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -/* - * SCC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - -typedef volatile struct CommonBufferDescriptor { - cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ - cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ -} RTXBD; - -static RTXBD *rtx; - - -static int sec_send(struct eth_device *dev, void *packet, int length) -{ - int i; - int result = 0; - - if (length <= 0) { - printf("scc: bad packet size: %d\n", length); - goto out; - } - - for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { - if (i >= CONFIG_SYS_SCC_TOUT_LOOP) { - puts ("scc: tx buffer not ready\n"); - goto out; - } - } - - rtx->txbd[txIdx].cbd_bufaddr = (uint)packet; - rtx->txbd[txIdx].cbd_datlen = length; - rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | - BD_ENET_TX_WRAP); - - for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { - if (i >= CONFIG_SYS_SCC_TOUT_LOOP) { - puts ("scc: tx error\n"); - goto out; - } - } - - /* return only status bits */ - result = rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS; - - out: - return result; -} - - -static int sec_rx(struct eth_device *dev) -{ - int length; - - for (;;) - { - if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - length = rtx->rxbd[rxIdx].cbd_datlen; - - if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) - { - printf("err: %x\n", rtx->rxbd[rxIdx].cbd_sc); - } - else - { - /* Pass the packet up to the protocol layers. */ - net_process_received_packet(net_rx_packets[rxIdx], length - 4); - } - - - /* Give the buffer back to the SCC. */ - rtx->rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | - BD_ENET_RX_EMPTY); - rxIdx = 0; - } - else { - rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - } - return length; -} - -/************************************************************** - * - * SCC Ethernet Initialization Routine - * - *************************************************************/ - -static int sec_init(struct eth_device *dev, bd_t *bis) -{ - int i; - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - scc_enet_t *pram_ptr; - uint dpaddr; - uchar ea[6]; - - rxIdx = 0; - txIdx = 0; - - /* - * Assign static pointer to BD area. - * Avoid exhausting DPRAM, which would cause a panic. - */ - if (rtx == NULL) { - dpaddr = m8260_cpm_dpalloc(sizeof(RTXBD) + 2, 16); - rtx = (RTXBD *)&immr->im_dprambase[dpaddr]; - } - - /* 24.21 - (1-3): ioports have been set up already */ - - /* 24.21 - (4,5): connect SCC's tx and rx clocks, use NMSI for SCC */ - immr->im_cpmux.cmx_uar = 0; - immr->im_cpmux.cmx_scr = ( (immr->im_cpmux.cmx_scr & ~CMXSCR_MASK) | - CONFIG_SYS_CMXSCR_VALUE); - - - /* 24.21 (6) write RBASE and TBASE to parameter RAM */ - pram_ptr = (scc_enet_t *)&(immr->im_dprambase[PROFF_ENET]); - pram_ptr->sen_genscc.scc_rbase = (unsigned int)(&rtx->rxbd[0]); - pram_ptr->sen_genscc.scc_tbase = (unsigned int)(&rtx->txbd[0]); - - pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Nrml Ops and Mot byte ordering */ - pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Nrml access */ - - pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. package len 1520 */ - - pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */ - pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */ - - - /* 24.21 - (7): Write INIT RX AND TX PARAMETERS to CPCR */ - while(immr->im_cpm.cp_cpcr & CPM_CR_FLG); - immr->im_cpm.cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE, - CPM_CR_ENET_SBLOCK, - 0x0c, - CPM_CR_INIT_TRX) | CPM_CR_FLG; - - /* 24.21 - (8-18): Set up parameter RAM */ - pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */ - pram_ptr->sen_alec = 0x0; /* Align Error Counter (unused) */ - pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */ - - pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */ - - pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */ - - pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */ - pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */ - - pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */ - pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */ - - pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */ - pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */ - pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */ - pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */ - - eth_getenv_enetaddr("ethaddr", ea); - pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4]; - pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2]; - pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0]; - - pram_ptr->sen_pper = 0x0; /* Persistence (unused) */ - - pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */ - pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */ - pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */ - pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */ - - pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */ - pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */ - pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */ - - /* 24.21 - (19): Initialize RxBD */ - for (i = 0; i < PKTBUFSRX; i++) - { - rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx->rxbd[i].cbd_datlen = 0; /* Reset */ - rtx->rxbd[i].cbd_bufaddr = (uint)net_rx_packets[i]; - } - - rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* 24.21 - (20): Initialize TxBD */ - for (i = 0; i < TX_BUF_CNT; i++) - { - rtx->txbd[i].cbd_sc = (BD_ENET_TX_PAD | - BD_ENET_TX_LAST | - BD_ENET_TX_TC); - rtx->txbd[i].cbd_datlen = 0; /* Reset */ - rtx->txbd[i].cbd_bufaddr = (uint)&txbuf[i][0]; - } - - rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* 24.21 - (21): Write 0xffff to SCCE */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_scce = ~(0x0); - - /* 24.21 - (22): Write to SCCM to enable TXE, RXF, TXB events */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_sccm = (SCCE_ENET_TXE | - SCCE_ENET_RXF | - SCCE_ENET_TXB); - - /* 24.21 - (23): we don't use ethernet interrupts */ - - /* 24.21 - (24): Clear GSMR_H to enable normal operations */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrh = 0; - - /* 24.21 - (25): Clear GSMR_L to enable normal operations */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl = (SCC_GSMRL_TCI | - SCC_GSMRL_TPL_48 | - SCC_GSMRL_TPP_10 | - SCC_GSMRL_MODE_ENET); - - /* 24.21 - (26): Initialize DSR */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_dsr = 0xd555; - - /* 24.21 - (27): Initialize PSMR2 - * - * Settings: - * CRC = 32-Bit CCITT - * NIB = Begin searching for SFD 22 bits after RENA - * FDE = Full Duplex Enable - * BRO = Reject broadcast packets - * PROMISCOUS = Catch all packets regardless of dest. MAC adress - */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_psmr = SCC_PSMR_ENCRC | - SCC_PSMR_NIB22 | -#if defined(CONFIG_SCC_ENET_FULL_DUPLEX) - SCC_PSMR_FDE | -#endif -#if defined(CONFIG_SCC_ENET_NO_BROADCAST) - SCC_PSMR_BRO | -#endif -#if defined(CONFIG_SCC_ENET_PROMISCOUS) - SCC_PSMR_PRO | -#endif - 0; - - /* 24.21 - (28): Write to GSMR_L to enable SCC */ - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR | - SCC_GSMRL_ENT); - - return 0; -} - - -static void sec_halt(struct eth_device *dev) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR | - SCC_GSMRL_ENT); -} - -#if 0 -static void sec_restart(void) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR | - SCC_GSMRL_ENT); -} -#endif - -int mpc82xx_scc_enet_initialize(bd_t *bis) -{ - struct eth_device *dev; - - dev = (struct eth_device *) malloc(sizeof *dev); - memset(dev, 0, sizeof *dev); - - strcpy(dev->name, "SCC"); - dev->init = sec_init; - dev->halt = sec_halt; - dev->send = sec_send; - dev->recv = sec_rx; - - eth_register(dev); - - return 1; -} diff --git a/arch/powerpc/cpu/mpc8260/interrupts.c b/arch/powerpc/cpu/mpc8260/interrupts.c deleted file mode 100644 index 41d2c04..0000000 --- a/arch/powerpc/cpu/mpc8260/interrupts.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00 - */ - -#include <common.h> -#include <command.h> -#include <mpc8260.h> -#include <mpc8260_irq.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -/****************************************************************************/ - -struct irq_action { - interrupt_handler_t *handler; - void *arg; - ulong count; -}; - -static struct irq_action irq_handlers[NR_IRQS]; - -static ulong ppc_cached_irq_mask[NR_MASK_WORDS]; - -/****************************************************************************/ -/* this section was ripped out of arch/powerpc/kernel/ppc8260_pic.c in the */ -/* Linux/PPC 2.4.x source. There was no copyright notice in that file. */ - -/* The 8260 internal interrupt controller. It is usually - * the only interrupt controller. - * There are two 32-bit registers (high/low) for up to 64 - * possible interrupts. - * - * Now, the fun starts.....Interrupt Numbers DO NOT MAP - * in a simple arithmetic fashion to mask or pending registers. - * That is, interrupt 4 does not map to bit position 4. - * We create two tables, indexed by vector number, to indicate - * which register to use and which bit in the register to use. - */ -static u_char irq_to_siureg[] = { - 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0 -}; - -static u_char irq_to_siubit[] = { - 31, 16, 17, 18, 19, 20, 21, 22, - 23, 24, 25, 26, 27, 28, 29, 30, - 29, 30, 16, 17, 18, 19, 20, 21, - 22, 23, 24, 25, 26, 27, 28, 31, - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 15, 14, 13, 12, 11, 10, 9, 8, - 7, 6, 5, 4, 3, 2, 1, 0 -}; - -static void m8260_mask_irq (unsigned int irq_nr) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - int bit, word; - volatile uint *simr; - - bit = irq_to_siubit[irq_nr]; - word = irq_to_siureg[irq_nr]; - - simr = &(immr->im_intctl.ic_simrh); - ppc_cached_irq_mask[word] &= ~(1 << (31 - bit)); - simr[word] = ppc_cached_irq_mask[word]; -} - -static void m8260_unmask_irq (unsigned int irq_nr) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - int bit, word; - volatile uint *simr; - - bit = irq_to_siubit[irq_nr]; - word = irq_to_siureg[irq_nr]; - - simr = &(immr->im_intctl.ic_simrh); - ppc_cached_irq_mask[word] |= (1 << (31 - bit)); - simr[word] = ppc_cached_irq_mask[word]; -} - -static void m8260_mask_and_ack (unsigned int irq_nr) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - int bit, word; - volatile uint *simr, *sipnr; - - bit = irq_to_siubit[irq_nr]; - word = irq_to_siureg[irq_nr]; - - simr = &(immr->im_intctl.ic_simrh); - sipnr = &(immr->im_intctl.ic_sipnrh); - ppc_cached_irq_mask[word] &= ~(1 << (31 - bit)); - simr[word] = ppc_cached_irq_mask[word]; - sipnr[word] = 1 << (31 - bit); -} - -static int m8260_get_irq (struct pt_regs *regs) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - int irq; - unsigned long bits; - - /* For MPC8260, read the SIVEC register and shift the bits down - * to get the irq number. */ - bits = immr->im_intctl.ic_sivec; - irq = bits >> 26; - return irq; -} - -/* end of code ripped out of arch/powerpc/kernel/ppc8260_pic.c */ -/****************************************************************************/ - -int interrupt_init_cpu (unsigned *decrementer_count) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - *decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ; - - /* Initialize the default interrupt mapping priorities */ - immr->im_intctl.ic_sicr = 0; - immr->im_intctl.ic_siprr = 0x05309770; - immr->im_intctl.ic_scprrh = 0x05309770; - immr->im_intctl.ic_scprrl = 0x05309770; - - /* disable all interrupts and clear all pending bits */ - immr->im_intctl.ic_simrh = ppc_cached_irq_mask[0] = 0; - immr->im_intctl.ic_simrl = ppc_cached_irq_mask[1] = 0; - immr->im_intctl.ic_sipnrh = 0xffffffff; - immr->im_intctl.ic_sipnrl = 0xffffffff; - - return 0; -} - -/****************************************************************************/ - -/* - * Handle external interrupts - */ -void external_interrupt (struct pt_regs *regs) -{ - int irq, unmask = 1; - - irq = m8260_get_irq (regs); - - m8260_mask_and_ack (irq); - - enable_interrupts (); - - if (irq_handlers[irq].handler != NULL) - (*irq_handlers[irq].handler) (irq_handlers[irq].arg); - else { - printf ("\nBogus External Interrupt IRQ %d\n", irq); - /* - * turn off the bogus interrupt, otherwise it - * might repeat forever - */ - unmask = 0; - } - - if (unmask) - m8260_unmask_irq (irq); -} - -/****************************************************************************/ - -/* - * Install and free an interrupt handler. - */ - -void -irq_install_handler (int irq, interrupt_handler_t * handler, void *arg) -{ - if (irq < 0 || irq >= NR_IRQS) { - printf ("irq_install_handler: bad irq number %d\n", irq); - return; - } - - if (irq_handlers[irq].handler != NULL) - printf ("irq_install_handler: 0x%08lx replacing 0x%08lx\n", - (ulong) handler, (ulong) irq_handlers[irq].handler); - - irq_handlers[irq].handler = handler; - irq_handlers[irq].arg = arg; - - m8260_unmask_irq (irq); -} - -void irq_free_handler (int irq) -{ - if (irq < 0 || irq >= NR_IRQS) { - printf ("irq_free_handler: bad irq number %d\n", irq); - return; - } - - m8260_mask_irq (irq); - - irq_handlers[irq].handler = NULL; - irq_handlers[irq].arg = NULL; -} - -/****************************************************************************/ - -void timer_interrupt_cpu (struct pt_regs *regs) -{ - /* nothing to do here */ - return; -} - -/****************************************************************************/ - -#if defined(CONFIG_CMD_IRQ) - -/* ripped this out of ppc4xx/interrupts.c */ - -/******************************************************************************* -* -* irqinfo - print information about PCI devices -* -*/ -void -do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char * const argv[]) -{ - int irq, re_enable; - - re_enable = disable_interrupts (); - - puts ("\nInterrupt-Information:\n" - "Nr Routine Arg Count\n"); - - for (irq = 0; irq < 32; irq++) - if (irq_handlers[irq].handler != NULL) - printf ("%02d %08lx %08lx %ld\n", irq, - (ulong) irq_handlers[irq].handler, - (ulong) irq_handlers[irq].arg, - irq_handlers[irq].count); - - if (re_enable) - enable_interrupts (); -} - -#endif diff --git a/arch/powerpc/cpu/mpc8260/kgdb.S b/arch/powerpc/cpu/mpc8260/kgdb.S deleted file mode 100644 index bc9c628..0000000 --- a/arch/powerpc/cpu/mpc8260/kgdb.S +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2000 Murray Jensen Murray.Jensen@cmst.csiro.au - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <command.h> -#include <mpc8260.h> - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> - -#if defined(CONFIG_CMD_KGDB) - - /* - * cache flushing routines for kgdb - */ - - .globl kgdb_flush_cache_all -kgdb_flush_cache_all: - mfspr r3, HID0 - ori r3, r3, HID0_ICFI|HID0_DCI /* Invalidate All */ - SYNC - mtspr HID0, r3 - blr - - .globl kgdb_flush_cache_range -kgdb_flush_cache_range: - li r5,CONFIG_SYS_CACHELINE_SIZE-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT - beqlr - mtctr r4 - mr r6,r3 -1: dcbst 0,r3 - addi r3,r3,CONFIG_SYS_CACHELINE_SIZE - bdnz 1b - sync /* wait for dcbst's to get to ram */ - mtctr r4 -2: icbi 0,r6 - addi r6,r6,CONFIG_SYS_CACHELINE_SIZE - bdnz 2b - SYNC - blr - -#endif diff --git a/arch/powerpc/cpu/mpc8260/pci.c b/arch/powerpc/cpu/mpc8260/pci.c deleted file mode 100644 index 56f290c..0000000 --- a/arch/powerpc/cpu/mpc8260/pci.c +++ /dev/null @@ -1,382 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (c) 2005 MontaVista Software, Inc. - * Vitaly Bordug vbordug@ru.mvista.com - * Added support for PCI bridge on MPC8272ADS - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -#ifdef CONFIG_PCI - -#include <pci.h> -#include <mpc8260.h> -#include <asm/m8260_pci.h> -#include <asm/io.h> -#ifdef CONFIG_OF_LIBFDT -#include <libfdt.h> -#include <fdt_support.h> -#endif - -/* - * Local->PCI map (from CPU) controlled by - * MPC826x master window - * - * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0 - * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1 - * - * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1) - * PCI Mem with prefetch - * - * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2) - * PCI Mem w/o prefetch - * - * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3) - * 32-bit PCI IO - * - * PCI->Local map (from PCI) - * MPC826x slave window controlled by - * - * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1) - * MPC826x local memory - */ - -/* - * Slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - -#ifndef CONFIG_SYS_PCI_SLV_MEM_LOCAL -#define PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */ -#else -#define PCI_SLV_MEM_LOCAL CONFIG_SYS_PCI_SLV_MEM_LOCAL -#endif - -#ifndef CONFIG_SYS_PCI_SLV_MEM_BUS -#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ -#else -#define PCI_SLV_MEM_BUS CONFIG_SYS_PCI_SLV_MEM_BUS -#endif - -#ifndef CONFIG_SYS_PICMR0_MASK_ATTRIB -#define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ - PICMR_PREFETCH_EN) -#else -#define PICMR0_MASK_ATTRIB CONFIG_SYS_PICMR0_MASK_ATTRIB -#endif - -/* - * These are the windows that allow the CPU to access PCI address space. - * All three PCI master windows, which allow the CPU to access PCI - * prefetch, non prefetch, and IO space (see below), must all fit within - * these windows. - */ - -/* PCIBR0 */ -#ifndef CONFIG_SYS_PCI_MSTR0_LOCAL -#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */ -#else -#define PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR0_LOCAL -#endif - -#ifndef CONFIG_SYS_PCIMSK0_MASK -#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */ -#else -#define PCIMSK0_MASK CONFIG_SYS_PCIMSK0_MASK -#endif - -/* PCIBR1 */ -#ifndef CONFIG_SYS_PCI_MSTR1_LOCAL -#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */ -#else -#define PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR1_LOCAL -#endif - -#ifndef CONFIG_SYS_PCIMSK1_MASK -#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */ -#else -#define PCIMSK1_MASK CONFIG_SYS_PCIMSK1_MASK -#endif - -/* - * Master window that allows the CPU to access PCI Memory (prefetch). - * This window will be setup with the first set of Outbound ATU registers - * in the bridge. - */ - -#ifndef CONFIG_SYS_PCI_MSTR_MEM_LOCAL -#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#else -#define PCI_MSTR_MEM_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL -#endif - -#ifndef CONFIG_SYS_PCI_MSTR_MEM_BUS -#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#else -#define PCI_MSTR_MEM_BUS CONFIG_SYS_PCI_MSTR_MEM_BUS -#endif - -#ifndef CONFIG_SYS_CPU_PCI_MEM_START -#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL -#else -#define CPU_PCI_MEM_START CONFIG_SYS_CPU_PCI_MEM_START -#endif - -#ifndef CONFIG_SYS_PCI_MSTR_MEM_SIZE -#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */ -#else -#define PCI_MSTR_MEM_SIZE CONFIG_SYS_PCI_MSTR_MEM_SIZE -#endif - -#ifndef CONFIG_SYS_POCMR0_MASK_ATTRIB -#define POCMR0_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN) -#else -#define POCMR0_MASK_ATTRIB CONFIG_SYS_POCMR0_MASK_ATTRIB -#endif - -/* - * Master window that allows the CPU to access PCI Memory (non-prefetch). - * This window will be setup with the second set of Outbound ATU registers - * in the bridge. - */ - -#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL -#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */ -#else -#define PCI_MSTR_MEMIO_LOCAL CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL -#endif - -#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_BUS -#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */ -#else -#define PCI_MSTR_MEMIO_BUS CONFIG_SYS_PCI_MSTR_MEMIO_BUS -#endif - -#ifndef CONFIG_SYS_CPU_PCI_MEMIO_START -#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL -#else -#define CPU_PCI_MEMIO_START CONFIG_SYS_CPU_PCI_MEMIO_START -#endif - -#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_SIZE -#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */ -#else -#define PCI_MSTR_MEMIO_SIZE CONFIG_SYS_PCI_MSTR_MEMIO_SIZE -#endif - -#ifndef CONFIG_SYS_POCMR1_MASK_ATTRIB -#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) -#else -#define POCMR1_MASK_ATTRIB CONFIG_SYS_POCMR1_MASK_ATTRIB -#endif - -/* - * Master window that allows the CPU to access PCI IO space. - * This window will be setup with the third set of Outbound ATU registers - * in the bridge. - */ - -#ifndef CONFIG_SYS_PCI_MSTR_IO_LOCAL -#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */ -#else -#define PCI_MSTR_IO_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL -#endif - -#ifndef CONFIG_SYS_PCI_MSTR_IO_BUS -#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */ -#else -#define PCI_MSTR_IO_BUS CONFIG_SYS_PCI_MSTR_IO_BUS -#endif - -#ifndef CONFIG_SYS_CPU_PCI_IO_START -#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL -#else -#define CPU_PCI_IO_START CONFIG_SYS_CPU_PCI_IO_START -#endif - -#ifndef CONFIG_SYS_PCI_MSTR_IO_SIZE -#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */ -#else -#define PCI_MSTR_IO_SIZE CONFIG_SYS_PCI_MSTR_IO_SIZE -#endif - -#ifndef CONFIG_SYS_POCMR2_MASK_ATTRIB -#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO) -#else -#define POCMR2_MASK_ATTRIB CONFIG_SYS_POCMR2_MASK_ATTRIB -#endif - -/* PCI bus configuration registers. - */ - -#define PCI_CLASS_BRIDGE_CTLR 0x06 - - -static inline void pci_outl (u32 addr, u32 data) -{ - *(volatile u32 *) addr = cpu_to_le32 (data); -} - -void pci_mpc8250_init (struct pci_controller *hose) -{ - u16 tempShort; - - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - pci_dev_t host_devno = PCI_BDF (0, 0, 0); - - pci_setup_indirect (hose, CONFIG_SYS_IMMR + PCI_CFG_ADDR_REG, - CONFIG_SYS_IMMR + PCI_CFG_DATA_REG); - - /* - * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), - * and local bus for PCI (SIUMCR [LBPC]). - */ - immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & - ~SIUMCR_LBPC11 & - ~SIUMCR_CS10PC11 & - ~SIUMCR_LBPC11) | - SIUMCR_LBPC01 | - SIUMCR_CS10PC01 | - SIUMCR_APPC10; - - /* Make PCI lowest priority */ - /* Each 4 bits is a device bus request and the MS 4bits - is highest priority */ - /* Bus 4bit value - --- ---------- - CPM high 0b0000 - CPM middle 0b0001 - CPM low 0b0010 - PCI reguest 0b0011 - Reserved 0b0100 - Reserved 0b0101 - Internal Core 0b0110 - External Master 1 0b0111 - External Master 2 0b1000 - External Master 3 0b1001 - The rest are reserved */ - immap->im_siu_conf.sc_ppc_alrh = 0x61207893; - - /* Park bus on core while modifying PCI Bus accesses */ - immap->im_siu_conf.sc_ppc_acr = 0x6; - - /* - * Set up master windows that allow the CPU to access PCI space. These - * windows are set up using the two SIU PCIBR registers. - */ - immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK; - immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE; - - /* Release PCI RST (by default the PCI RST signal is held low) */ - immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN); - - /* give it some time */ - { - udelay (1000); - } - - /* - * Set up master window that allows the CPU to access PCI Memory (prefetch) - * space. This window is set up using the first set of Outbound ATU registers. - */ - immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12); /* PCI base */ - immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12); /* Local base */ - immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB); /* Size & attribute */ - - /* - * Set up master window that allows the CPU to access PCI Memory (non-prefetch) - * space. This window is set up using the second set of Outbound ATU registers. - */ - immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */ - immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */ - immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB); /* Size & attribute */ - - /* - * Set up master window that allows the CPU to access PCI IO space. This window - * is set up using the third set of Outbound ATU registers. - */ - immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */ - immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12); /* Local base */ - immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB); /* Size & attribute */ - - /* - * Set up slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12); /* PCI base */ - immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */ - immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */ - - /* See above for description - puts PCI request as highest priority */ - immap->im_siu_conf.sc_ppc_alrh = 0x03124567; - - /* Park the bus on the PCI */ - immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; - - /* Host mode - specify the bridge as a host-PCI bridge */ - - pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE, - PCI_CLASS_BRIDGE_CTLR); - - /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */ - pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort); - pci_hose_write_config_word (hose, host_devno, PCI_COMMAND, - tempShort | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); - - /* do some bridge init, should be done on all 8260 based bridges */ - pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE, - 0x08); - pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER, - 0xF8); - - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* System memory space */ - pci_set_region (hose->regions + 0, - CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_BASE, - 0x4000000, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - /* PCI memory space */ - pci_set_region (hose->regions + 1, - PCI_MSTR_MEM_BUS, - PCI_MSTR_MEM_LOCAL, - PCI_MSTR_MEM_SIZE, PCI_REGION_MEM); - - /* PCI I/O space */ - pci_set_region (hose->regions + 2, - PCI_MSTR_IO_BUS, - PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO); - - hose->region_count = 3; - - pci_register_hose (hose); - /* Mask off master abort machine checks */ - immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP); - eieio (); - - hose->last_busno = pci_hose_scan (hose); - - - /* clear the error in the error status register */ - immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP); - - /* unmask master abort machine checks */ - immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP); -} - -#if defined(CONFIG_OF_LIBFDT) -void ft_pci_setup(void *blob, bd_t *bd) -{ - do_fixup_by_prop_u32(blob, "device_type", "pci", 4, - "clock-frequency", gd->pci_clk, 1); -} -#endif - -#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/cpu/mpc8260/serial_scc.c b/arch/powerpc/cpu/mpc8260/serial_scc.c deleted file mode 100644 index 8bfb3de..0000000 --- a/arch/powerpc/cpu/mpc8260/serial_scc.c +++ /dev/null @@ -1,492 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00. - */ - -/* - * Minimal serial functions needed to use one of the SCC ports - * as serial console interface. - */ - -#include <common.h> -#include <mpc8260.h> -#include <asm/cpm_8260.h> -#include <serial.h> -#include <linux/compiler.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CONS_ON_SCC) - -#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */ - -#define SCC_INDEX 0 -#define PROFF_SCC PROFF_SCC1 -#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\ - CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK) -#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1) -#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE -#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK - -#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */ - -#define SCC_INDEX 1 -#define PROFF_SCC PROFF_SCC2 -#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\ - CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK) -#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2) -#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE -#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK - -#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */ - -#define SCC_INDEX 2 -#define PROFF_SCC PROFF_SCC3 -#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\ - CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK) -#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3) -#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE -#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK - -#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */ - -#define SCC_INDEX 3 -#define PROFF_SCC PROFF_SCC4 -#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\ - CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK) -#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4) -#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE -#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK - -#else - -#error "console not correctly defined" - -#endif - -static int mpc8260_scc_serial_init(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile scc_t *sp; - volatile scc_uart_t *up; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8260_t *cp = &(im->im_cpm); - uint dpaddr; - - /* initialize pointers to SCC */ - - sp = (scc_t *) &(im->im_scc[SCC_INDEX]); - up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC]; - - /* Disable transmitter/receiver. - */ - sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - /* put the SCC channel into NMSI (non multiplexd serial interface) - * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15). - */ - im->im_cpmux.cmx_scr = (im->im_cpmux.cmx_scr&~CMXSCR_MASK)|CMXSCR_VALUE; - - /* Set up the baud rate generator. - */ - serial_setbrg (); - - /* Allocate space for two buffer descriptors in the DP ram. - * damm: allocating space after the two buffers for rx/tx data - */ - - dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16); - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rbdf = (cbd_t *)&im->im_dprambase[dpaddr]; - rbdf->cbd_bufaddr = (uint) (rbdf+2); - rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1; - tbdf->cbd_sc = BD_SC_WRAP; - - /* Set up the uart parameters in the parameter ram. - */ - up->scc_genscc.scc_rbase = dpaddr; - up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t); - up->scc_genscc.scc_rfcr = CPMFCR_EB; - up->scc_genscc.scc_tfcr = CPMFCR_EB; - up->scc_genscc.scc_mrblr = 1; - up->scc_maxidl = 0; - up->scc_brkcr = 1; - up->scc_parec = 0; - up->scc_frmec = 0; - up->scc_nosec = 0; - up->scc_brkec = 0; - up->scc_uaddr1 = 0; - up->scc_uaddr2 = 0; - up->scc_toseq = 0; - up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000; - up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000; - up->scc_rccm = 0xc0ff; - - /* Mask all interrupts and remove anything pending. - */ - sp->scc_sccm = 0; - sp->scc_scce = 0xffff; - - /* Set 8 bit FIFO, 16 bit oversampling and UART mode. - */ - sp->scc_gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */ - sp->scc_gsmrl = \ - SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART; - - /* Set CTS flow control, 1 stop bit, 8 bit character length, - * normal async UART mode, no parity - */ - sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL; - - /* execute the "Init Rx and Tx params" CP command. - */ - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK, - 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - /* Enable transmitter/receiver. - */ - sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT; - - return (0); -} - -static void mpc8260_scc_serial_setbrg(void) -{ -#if defined(CONFIG_CONS_USE_EXTC) - m8260_cpm_extcbrg(SCC_INDEX, gd->baudrate, - CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL); -#else - m8260_cpm_setbrg(SCC_INDEX, gd->baudrate); -#endif -} - -static void mpc8260_scc_serial_putc(const char c) -{ - volatile scc_uart_t *up; - volatile cbd_t *tbdf; - volatile immap_t *im; - - if (c == '\n') - serial_putc ('\r'); - - im = (immap_t *)CONFIG_SYS_IMMR; - up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC]; - tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase]; - - /* Wait for last character to go. - */ - while (tbdf->cbd_sc & BD_SC_READY) - ; - - /* Load the character into the transmit buffer. - */ - *(volatile char *)tbdf->cbd_bufaddr = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; -} - -static int mpc8260_scc_serial_getc(void) -{ - volatile cbd_t *rbdf; - volatile scc_uart_t *up; - volatile immap_t *im; - unsigned char c; - - im = (immap_t *)CONFIG_SYS_IMMR; - up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC]; - rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase]; - - /* Wait for character to show up. - */ - while (rbdf->cbd_sc & BD_SC_EMPTY) - ; - - /* Grab the char and clear the buffer again. - */ - c = *(volatile unsigned char *)rbdf->cbd_bufaddr; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return (c); -} - -static int mpc8260_scc_serial_tstc(void) -{ - volatile cbd_t *rbdf; - volatile scc_uart_t *up; - volatile immap_t *im; - - im = (immap_t *)CONFIG_SYS_IMMR; - up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC]; - rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase]; - - return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0); -} - -static struct serial_device mpc8260_scc_serial_drv = { - .name = "mpc8260_scc_uart", - .start = mpc8260_scc_serial_init, - .stop = NULL, - .setbrg = mpc8260_scc_serial_setbrg, - .putc = mpc8260_scc_serial_putc, - .puts = default_serial_puts, - .getc = mpc8260_scc_serial_getc, - .tstc = mpc8260_scc_serial_tstc, -}; - -void mpc8260_scc_serial_initialize(void) -{ - serial_register(&mpc8260_scc_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &mpc8260_scc_serial_drv; -} -#endif /* CONFIG_CONS_ON_SCC */ - -#if defined(CONFIG_KGDB_ON_SCC) - -#if defined(CONFIG_CONS_ON_SCC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX -#error Whoops! serial console and kgdb are on the same scc serial port -#endif - -#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SCC1 */ - -#define KGDB_SCC_INDEX 0 -#define KGDB_PROFF_SCC PROFF_SCC1 -#define KGDB_CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\ - CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK) -#define KGDB_CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1) -#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE -#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK - -#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SCC2 */ - -#define KGDB_SCC_INDEX 1 -#define KGDB_PROFF_SCC PROFF_SCC2 -#define KGDB_CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\ - CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK) -#define KGDB_CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2) -#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE -#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK - -#elif CONFIG_KGDB_INDEX == 3 /* KGDB Port on SCC3 */ - -#define KGDB_SCC_INDEX 2 -#define KGDB_PROFF_SCC PROFF_SCC3 -#define KGDB_CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\ - CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK) -#define KGDB_CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3) -#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE -#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK - -#elif CONFIG_KGDB_INDEX == 4 /* KGDB Port on SCC4 */ - -#define KGDB_SCC_INDEX 3 -#define KGDB_PROFF_SCC PROFF_SCC4 -#define KGDB_CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\ - CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK) -#define KGDB_CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4) -#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE -#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK - -#else - -#error "kgdb serial port not correctly defined" - -#endif - -void -kgdb_serial_init (void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile scc_t *sp; - volatile scc_uart_t *up; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8260_t *cp = &(im->im_cpm); - uint dpaddr, speed = CONFIG_KGDB_BAUDRATE; - char *s, *e; - - if ((s = getenv("kgdbrate")) != NULL && *s != '\0') { - ulong rate = simple_strtoul(s, &e, 10); - if (e > s && *e == '\0') - speed = rate; - } - - /* initialize pointers to SCC */ - - sp = (scc_t *) &(im->im_scc[KGDB_SCC_INDEX]); - up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC]; - - /* Disable transmitter/receiver. - */ - sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - /* put the SCC channel into NMSI (non multiplexd serial interface) - * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15). - */ - im->im_cpmux.cmx_scr = \ - (im->im_cpmux.cmx_scr & ~KGDB_CMXSCR_MASK) | KGDB_CMXSCR_VALUE; - - /* Set up the baud rate generator. - */ -#if defined(CONFIG_KGDB_USE_EXTC) - m8260_cpm_extcbrg(KGDB_SCC_INDEX, speed, - CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL); -#else - m8260_cpm_setbrg(KGDB_SCC_INDEX, speed); -#endif - - /* Allocate space for two buffer descriptors in the DP ram. - * damm: allocating space after the two buffers for rx/tx data - */ - - dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16); - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rbdf = (cbd_t *)&im->im_dprambase[dpaddr]; - rbdf->cbd_bufaddr = (uint) (rbdf+2); - rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1; - tbdf->cbd_sc = BD_SC_WRAP; - - /* Set up the uart parameters in the parameter ram. - */ - up->scc_genscc.scc_rbase = dpaddr; - up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t); - up->scc_genscc.scc_rfcr = CPMFCR_EB; - up->scc_genscc.scc_tfcr = CPMFCR_EB; - up->scc_genscc.scc_mrblr = 1; - up->scc_maxidl = 0; - up->scc_brkcr = 1; - up->scc_parec = 0; - up->scc_frmec = 0; - up->scc_nosec = 0; - up->scc_brkec = 0; - up->scc_uaddr1 = 0; - up->scc_uaddr2 = 0; - up->scc_toseq = 0; - up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000; - up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000; - up->scc_rccm = 0xc0ff; - - /* Mask all interrupts and remove anything pending. - */ - sp->scc_sccm = 0; - sp->scc_scce = 0xffff; - - /* Set 8 bit FIFO, 16 bit oversampling and UART mode. - */ - sp->scc_gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */ - sp->scc_gsmrl = \ - SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART; - - /* Set CTS flow control, 1 stop bit, 8 bit character length, - * normal async UART mode, no parity - */ - sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL; - - /* execute the "Init Rx and Tx params" CP command. - */ - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SCC_PAGE, KGDB_CPM_CR_SCC_SBLOCK, - 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - /* Enable transmitter/receiver. - */ - sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT; - - printf("SCC%d at %dbps ", CONFIG_KGDB_INDEX, speed); -} - -void -putDebugChar(const char c) -{ - volatile scc_uart_t *up; - volatile cbd_t *tbdf; - volatile immap_t *im; - - if (c == '\n') - putDebugChar ('\r'); - - im = (immap_t *)CONFIG_SYS_IMMR; - up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC]; - tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase]; - - /* Wait for last character to go. - */ - while (tbdf->cbd_sc & BD_SC_READY) - ; - - /* Load the character into the transmit buffer. - */ - *(volatile char *)tbdf->cbd_bufaddr = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; -} - -void -putDebugStr (const char *s) -{ - while (*s) { - putDebugChar (*s++); - } -} - -int -getDebugChar(void) -{ - volatile cbd_t *rbdf; - volatile scc_uart_t *up; - volatile immap_t *im; - unsigned char c; - - im = (immap_t *)CONFIG_SYS_IMMR; - up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC]; - rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase]; - - /* Wait for character to show up. - */ - while (rbdf->cbd_sc & BD_SC_EMPTY) - ; - - /* Grab the char and clear the buffer again. - */ - c = *(volatile unsigned char *)rbdf->cbd_bufaddr; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return (c); -} - -void -kgdb_interruptible(int yes) -{ - return; -} - -#endif /* CONFIG_KGDB_ON_SCC */ diff --git a/arch/powerpc/cpu/mpc8260/serial_smc.c b/arch/powerpc/cpu/mpc8260/serial_smc.c deleted file mode 100644 index 594c5eb..0000000 --- a/arch/powerpc/cpu/mpc8260/serial_smc.c +++ /dev/null @@ -1,461 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with - * changes based on the file arch/powerpc/mbxboot/m8260_tty.c from the - * Linux/PPC sources (m8260_tty.c had no copyright info in it). - */ - -/* - * Minimal serial functions needed to use one of the SMC ports - * as serial console interface. - */ - -#include <common.h> -#include <mpc8260.h> -#include <asm/cpm_8260.h> -#include <serial.h> -#include <linux/compiler.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CONS_ON_SMC) - -#if CONFIG_CONS_INDEX == 1 /* Console on SMC1 */ - -#define SMC_INDEX 0 -#define PROFF_SMC_BASE PROFF_SMC1_BASE -#define PROFF_SMC PROFF_SMC1 -#define CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE -#define CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK -#define CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK) -#define CMXSMR_VALUE CMXSMR_SMC1CS_BRG7 - -#elif CONFIG_CONS_INDEX == 2 /* Console on SMC2 */ - -#define SMC_INDEX 1 -#define PROFF_SMC_BASE PROFF_SMC2_BASE -#define PROFF_SMC PROFF_SMC2 -#define CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE -#define CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK -#define CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK) -#define CMXSMR_VALUE CMXSMR_SMC2CS_BRG8 - -#else - -#error "console not correctly defined" - -#endif - -#if !defined(CONFIG_SYS_SMC_RXBUFLEN) -#define CONFIG_SYS_SMC_RXBUFLEN 1 -#define CONFIG_SYS_MAXIDLE 0 -#else -#if !defined(CONFIG_SYS_MAXIDLE) -#error "you must define CONFIG_SYS_MAXIDLE" -#endif -#endif - -typedef volatile struct serialbuffer { - cbd_t rxbd; /* Rx BD */ - cbd_t txbd; /* Tx BD */ - uint rxindex; /* index for next character to read */ - volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */ - volatile uchar txbuf; /* tx buffers */ -} serialbuffer_t; - -/* map rs_table index to baud rate generator index */ -static unsigned char brg_map[] = { - 6, /* BRG7 for SMC1 */ - 7, /* BRG8 for SMC2 */ - 0, /* BRG1 for SCC1 */ - 1, /* BRG1 for SCC2 */ - 2, /* BRG1 for SCC3 */ - 3, /* BRG1 for SCC4 */ -}; - -static int mpc8260_smc_serial_init(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile smc_t *sp; - volatile smc_uart_t *up; - volatile cpm8260_t *cp = &(im->im_cpm); - uint dpaddr; - volatile serialbuffer_t *rtx; - - /* initialize pointers to SMC */ - - sp = (smc_t *) &(im->im_smc[SMC_INDEX]); - im->im_dprambase16[PROFF_SMC_BASE / sizeof(u16)] = PROFF_SMC; - up = (smc_uart_t *)&im->im_dprambase[PROFF_SMC]; - - /* Disable transmitter/receiver. */ - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - - /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */ - - /* Allocate space for two buffer descriptors in the DP ram. - * damm: allocating space after the two buffers for rx/tx data - */ - - /* allocate size of struct serialbuffer with bd rx/tx, - * buffer rx/tx and rx index - */ - dpaddr = m8260_cpm_dpalloc((sizeof(serialbuffer_t)), 16); - - rtx = (serialbuffer_t *)&im->im_dprambase[dpaddr]; - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf; - rtx->rxbd.cbd_sc = 0; - - rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf; - rtx->txbd.cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. */ - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = CPMFCR_EB; - up->smc_tfcr = CPMFCR_EB; - up->smc_brklen = 0; - up->smc_brkec = 0; - up->smc_brkcr = 0; - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Mask all interrupts and remove anything pending. */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* put the SMC channel into NMSI (non multiplexd serial interface) - * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17). - */ - im->im_cpmux.cmx_smr = (im->im_cpmux.cmx_smr&~CMXSMR_MASK)|CMXSMR_VALUE; - - /* Set up the baud rate generator. */ - serial_setbrg (); - - /* Make the first buffer the only buffer. */ - rtx->txbd.cbd_sc |= BD_SC_WRAP; - rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* single/multi character receive. */ - up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN; - up->smc_maxidl = CONFIG_SYS_MAXIDLE; - rtx->rxindex = 0; - - /* Initialize Tx/Rx parameters. */ - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC_PAGE, CPM_CR_SMC_SBLOCK, - 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - /* Enable transmitter/receiver. */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; - - return (0); -} - -static void mpc8260_smc_serial_setbrg(void) -{ -#if defined(CONFIG_CONS_USE_EXTC) - m8260_cpm_extcbrg(brg_map[SMC_INDEX], gd->baudrate, - CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL); -#else - m8260_cpm_setbrg(brg_map[SMC_INDEX], gd->baudrate); -#endif -} - -static void mpc8260_smc_serial_putc(const char c) -{ - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile serialbuffer_t *rtx; - - if (c == '\n') - serial_putc ('\r'); - - up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]); - - rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase]; - - /* Wait for last character to go. */ - while (rtx->txbd.cbd_sc & BD_SC_READY & BD_SC_READY) - ; - rtx->txbuf = c; - rtx->txbd.cbd_datlen = 1; - rtx->txbd.cbd_sc |= BD_SC_READY; -} - -static int mpc8260_smc_serial_getc(void) -{ - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile serialbuffer_t *rtx; - unsigned char c; - - up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]); - - rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase]; - - /* Wait for character to show up. */ - while (rtx->rxbd.cbd_sc & BD_SC_EMPTY) - ; - - /* the characters are read one by one, - * use the rxindex to know the next char to deliver - */ - c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr + rtx->rxindex); - rtx->rxindex++; - - /* check if all char are readout, then make prepare for next receive */ - if (rtx->rxindex >= rtx->rxbd.cbd_datlen) { - rtx->rxindex = 0; - rtx->rxbd.cbd_sc |= BD_SC_EMPTY; - } - return(c); -} - -static int mpc8260_smc_serial_tstc(void) -{ - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile serialbuffer_t *rtx; - - up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]); - rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase]; - - return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY); -} - -static struct serial_device mpc8260_smc_serial_drv = { - .name = "mpc8260_smc_uart", - .start = mpc8260_smc_serial_init, - .stop = NULL, - .setbrg = mpc8260_smc_serial_setbrg, - .putc = mpc8260_smc_serial_putc, - .puts = default_serial_puts, - .getc = mpc8260_smc_serial_getc, - .tstc = mpc8260_smc_serial_tstc, -}; - -void mpc8260_smc_serial_initialize(void) -{ - serial_register(&mpc8260_smc_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &mpc8260_smc_serial_drv; -} -#endif /* CONFIG_CONS_ON_SMC */ - -#if defined(CONFIG_KGDB_ON_SMC) - -#if defined(CONFIG_CONS_ON_SMC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX -#error Whoops! serial console and kgdb are on the same smc serial port -#endif - -#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SMC1 */ - -#define KGDB_SMC_INDEX 0 -#define KGDB_PROFF_SMC_BASE PROFF_SMC1_BASE -#define KGDB_PROFF_SMC PROFF_SMC1 -#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE -#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK -#define KGDB_CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK) -#define KGDB_CMXSMR_VALUE CMXSMR_SMC1CS_BRG7 - -#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SMC2 */ - -#define KGDB_SMC_INDEX 1 -#define KGDB_PROFF_SMC_BASE PROFF_SMC2_BASE -#define KGDB_PROFF_SMC PROFF_SMC2 -#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE -#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK -#define KGDB_CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK) -#define KGDB_CMXSMR_VALUE CMXSMR_SMC2CS_BRG8 - -#else - -#error "console not correctly defined" - -#endif - -void -kgdb_serial_init (void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile smc_t *sp; - volatile smc_uart_t *up; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8260_t *cp = &(im->im_cpm); - uint dpaddr, speed = CONFIG_KGDB_BAUDRATE; - char *s, *e; - - if ((s = getenv("kgdbrate")) != NULL && *s != '\0') { - ulong rate = simple_strtoul(s, &e, 10); - if (e > s && *e == '\0') - speed = rate; - } - - /* initialize pointers to SMC */ - - sp = (smc_t *) &(im->im_smc[KGDB_SMC_INDEX]); - im->im_dprambase16[KGDB_PROFF_SMC_BASE / sizeof(u16)] = KGDB_PROFF_SMC; - up = (smc_uart_t *)&im->im_dprambase[KGDB_PROFF_SMC]; - - /* Disable transmitter/receiver. */ - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - - /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */ - - /* Allocate space for two buffer descriptors in the DP ram. - * damm: allocating space after the two buffers for rx/tx data - */ - - dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16); - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rbdf = (cbd_t *)&im->im_dprambase[dpaddr]; - rbdf->cbd_bufaddr = (uint) (rbdf+2); - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1; - tbdf->cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. */ - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = CPMFCR_EB; - up->smc_tfcr = CPMFCR_EB; - up->smc_brklen = 0; - up->smc_brkec = 0; - up->smc_brkcr = 0; - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Mask all interrupts and remove anything pending. */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* put the SMC channel into NMSI (non multiplexd serial interface) - * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17). - */ - im->im_cpmux.cmx_smr = - (im->im_cpmux.cmx_smr & ~KGDB_CMXSMR_MASK) | KGDB_CMXSMR_VALUE; - - /* Set up the baud rate generator. */ -#if defined(CONFIG_KGDB_USE_EXTC) - m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed, - CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL); -#else - m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed); -#endif - - /* Make the first buffer the only buffer. */ - tbdf->cbd_sc |= BD_SC_WRAP; - rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* Single character receive. */ - up->smc_mrblr = 1; - up->smc_maxidl = 0; - - /* Initialize Tx/Rx parameters. */ - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SMC_PAGE, KGDB_CPM_CR_SMC_SBLOCK, - 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - /* Enable transmitter/receiver. */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; - - printf("SMC%d at %dbps ", CONFIG_KGDB_INDEX, speed); -} - -void -putDebugChar(const char c) -{ - volatile cbd_t *tbdf; - volatile char *buf; - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - - if (c == '\n') - putDebugChar ('\r'); - - up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]); - - tbdf = (cbd_t *)&im->im_dprambase[up->smc_tbase]; - - /* Wait for last character to go. */ - buf = (char *)tbdf->cbd_bufaddr; - while (tbdf->cbd_sc & BD_SC_READY) - ; - - *buf = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; -} - -void -putDebugStr (const char *s) -{ - while (*s) { - putDebugChar (*s++); - } -} - -int -getDebugChar(void) -{ - volatile cbd_t *rbdf; - volatile unsigned char *buf; - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - unsigned char c; - - up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]); - - rbdf = (cbd_t *)&im->im_dprambase[up->smc_rbase]; - - /* Wait for character to show up. */ - buf = (unsigned char *)rbdf->cbd_bufaddr; - while (rbdf->cbd_sc & BD_SC_EMPTY) - ; - c = *buf; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return(c); -} - -void -kgdb_interruptible(int yes) -{ - return; -} - -#endif /* CONFIG_KGDB_ON_SMC */ diff --git a/arch/powerpc/cpu/mpc8260/speed.c b/arch/powerpc/cpu/mpc8260/speed.c deleted file mode 100644 index 0a06c48..0000000 --- a/arch/powerpc/cpu/mpc8260/speed.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8260.h> -#include <asm/processor.h> - -#if defined(CONFIG_BOARD_GET_CPU_CLK_F) -extern unsigned long board_get_cpu_clk_f (void); -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -/* Bus-to-Core Multiplier */ -#define _1x 2 -#define _1_5x 3 -#define _2x 4 -#define _2_5x 5 -#define _3x 6 -#define _3_5x 7 -#define _4x 8 -#define _4_5x 9 -#define _5x 10 -#define _5_5x 11 -#define _6x 12 -#define _6_5x 13 -#define _7x 14 -#define _7_5x 15 -#define _8x 16 -#define _byp -1 -#define _off -2 -#define _unk -3 - -typedef struct { - int b2c_mult; - int vco_div; - char *freq_60x; - char *freq_core; -} corecnf_t; - -/* - * this table based on "Errata to MPC8260 PowerQUICC II User's Manual", - * Rev. 1, 8/2000, page 10. - */ -corecnf_t corecnf_tab[] = { - { _1_5x, 4, " 33-100", " 33-100" }, /* 0x00 */ - { _1x, 4, " 50-150", " 50-150" }, /* 0x01 */ - { _1x, 8, " 25-75 ", " 25-75 " }, /* 0x02 */ - { _byp, -1, " ?-? ", " ?-? " }, /* 0x03 */ - { _2x, 2, " 50-150", "100-300" }, /* 0x04 */ - { _2x, 4, " 25-75 ", " 50-150" }, /* 0x05 */ - { _2_5x, 2, " 40-120", "100-240" }, /* 0x06 */ - { _4_5x, 2, " 22-65 ", "100-300" }, /* 0x07 */ - { _3x, 2, " 33-100", "100-300" }, /* 0x08 */ - { _5_5x, 2, " 18-55 ", "100-300" }, /* 0x09 */ - { _4x, 2, " 25-75 ", "100-300" }, /* 0x0A */ - { _5x, 2, " 20-60 ", "100-300" }, /* 0x0B */ - { _1_5x, 8, " 16-50 ", " 16-50 " }, /* 0x0C */ - { _6x, 2, " 16-50 ", "100-300" }, /* 0x0D */ - { _3_5x, 2, " 30-85 ", "100-300" }, /* 0x0E */ - { _off, -1, " ?-? ", " ?-? " }, /* 0x0F */ - { _3x, 4, " 16-50 ", " 50-150" }, /* 0x10 */ - { _2_5x, 4, " 20-60 ", " 50-120" }, /* 0x11 */ - { _6_5x, 2, " 15-46 ", "100-300" }, /* 0x12 */ - { _byp, -1, " ?-? ", " ?-? " }, /* 0x13 */ - { _7x, 2, " 14-43 ", "100-300" }, /* 0x14 */ - { _2x, 4, " 25-75 ", " 50-150" }, /* 0x15 */ - { _7_5x, 2, " 13-40 ", "100-300" }, /* 0x16 */ - { _4_5x, 2, " 22-65 ", "100-300" }, /* 0x17 */ - { _unk, -1, " ?-? ", " ?-? " }, /* 0x18 */ - { _5_5x, 2, " 18-55 ", "100-300" }, /* 0x19 */ - { _4x, 2, " 25-75 ", "100-300" }, /* 0x1A */ - { _5x, 2, " 20-60 ", "100-300" }, /* 0x1B */ - { _8x, 2, " 12-38 ", "100-300" }, /* 0x1C */ - { _6x, 2, " 16-50 ", "100-300" }, /* 0x1D */ - { _3_5x, 2, " 30-85 ", "100-300" }, /* 0x1E */ - { _off, -1, " ?-? ", " ?-? " }, /* 0x1F */ -}; - -/* ------------------------------------------------------------------------- */ - -/* - * - */ - -int get_clocks (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - ulong clkin; - ulong sccr, dfbrg; - ulong scmr, corecnf, plldf, pllmf; - corecnf_t *cp; - -#if !defined(CONFIG_8260_CLKIN) -#error clock measuring not implemented yet - define CONFIG_8260_CLKIN -#else -#if defined(CONFIG_BOARD_GET_CPU_CLK_F) - clkin = board_get_cpu_clk_f (); -#else - clkin = CONFIG_8260_CLKIN; -#endif -#endif - - sccr = immap->im_clkrst.car_sccr; - dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; - - scmr = immap->im_clkrst.car_scmr; - corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT; - cp = &corecnf_tab[corecnf]; - - /* HiP7, HiP7 Rev01, HiP7 RevA */ - if ((get_pvr () == PVR_8260_HIP7) || - (get_pvr () == PVR_8260_HIP7R1) || - (get_pvr () == PVR_8260_HIP7RA)) { - pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT; - gd->arch.vco_out = clkin * (pllmf + 1); - } else { /* HiP3, HiP4 */ - pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT; - plldf = (scmr & SCMR_PLLDF) ? 1 : 0; - gd->arch.vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1); - } - - gd->arch.cpm_clk = gd->arch.vco_out / 2; - gd->bus_clk = clkin; - gd->arch.scc_clk = gd->arch.vco_out / 4; - gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1))); - - if (cp->b2c_mult > 0) { - gd->cpu_clk = (clkin * cp->b2c_mult) / 2; - } else { - gd->cpu_clk = clkin; - } - -#ifdef CONFIG_PCI - gd->pci_clk = clkin; - - if (sccr & SCCR_PCI_MODE) { - uint pci_div; - uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; - - if (sccr & SCCR_PCI_MODCK) { - pci_div = 2; - if (pcidf == 9) { - pci_div *= 5; - } else if (pcidf == 0xB) { - pci_div *= 6; - } else { - pci_div *= (pcidf + 1); - } - } else { - pci_div = pcidf + 1; - } - - gd->pci_clk = (gd->arch.cpm_clk * 2) / pci_div; - } -#endif - - return (0); -} - -int prt_8260_clks (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - ulong sccr, dfbrg; - ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf; - corecnf_t *cp; - - sccr = immap->im_clkrst.car_sccr; - dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; - - scmr = immap->im_clkrst.car_scmr; - corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT; - busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT; - cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT; - plldf = (scmr & SCMR_PLLDF) ? 1 : 0; - pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT; - pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; - - cp = &corecnf_tab[corecnf]; - - puts (CPU_ID_STR " Clock Configuration\n - Bus-to-Core Mult "); - - switch (cp->b2c_mult) { - case _byp: - puts ("BYPASS"); - break; - - case _off: - puts ("OFF"); - break; - - case _unk: - puts ("UNKNOWN"); - break; - - default: - printf ("%d%sx", - cp->b2c_mult / 2, - (cp->b2c_mult % 2) ? ".5" : ""); - break; - } - - printf (", VCO Div %d, 60x Bus Freq %s, Core Freq %s\n", - cp->vco_div, cp->freq_60x, cp->freq_core); - - printf (" - dfbrg %ld, corecnf 0x%02lx, busdf %ld, cpmdf %ld, " - "plldf %ld, pllmf %ld, pcidf %ld\n", - dfbrg, corecnf, busdf, cpmdf, - plldf, pllmf, pcidf); - - printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n", - gd->arch.vco_out, gd->arch.scc_clk, gd->arch.brg_clk); - - printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n", - gd->cpu_clk, gd->arch.cpm_clk, gd->bus_clk); -#ifdef CONFIG_PCI - printf (" - pci_clk %10ld\n", gd->pci_clk); -#endif - putc ('\n'); - - return (0); -} diff --git a/arch/powerpc/cpu/mpc8260/spi.c b/arch/powerpc/cpu/mpc8260/spi.c deleted file mode 100644 index c7fb4e9..0000000 --- a/arch/powerpc/cpu/mpc8260/spi.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * Copyright (c) 2001 Navin Boppuri / Prashant Patel - * nboppuri@trinetcommunication.com, - * pmpatel@trinetcommunication.com - * Copyright (c) 2001 Gerd Mennchen Gerd.Mennchen@icn.siemens.de - * Copyright (c) 2001-2003 Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * MPC8260 CPM SPI interface. - * - * Parts of this code are probably not portable and/or specific to - * the board which I used for the tests. Please send fixes/complaints - * to wd@denx.de - * - */ - -#include <common.h> -#include <asm/cpm_8260.h> -#include <linux/ctype.h> -#include <malloc.h> -#include <post.h> -#include <net.h> - -#if defined(CONFIG_SPI) - -/* Warning: - * You cannot enable DEBUG for early system initalization, i. e. when - * this driver is used to read environment parameters like "baudrate" - * from EEPROM which are used to initialize the serial port which is - * needed to print the debug messages... - */ -#undef DEBUG - -#define SPI_EEPROM_WREN 0x06 -#define SPI_EEPROM_RDSR 0x05 -#define SPI_EEPROM_READ 0x03 -#define SPI_EEPROM_WRITE 0x02 - -/* --------------------------------------------------------------- - * Offset for initial SPI buffers in DPRAM: - * We need a 520 byte scratch DPRAM area to use at an early stage. - * It is used between the two initialization calls (spi_init_f() - * and spi_init_r()). - * The value 0x2000 makes it far enough from the start of the data - * area (as well as from the stack pointer). - * --------------------------------------------------------------- */ -#ifndef CONFIG_SYS_SPI_INIT_OFFSET -#define CONFIG_SYS_SPI_INIT_OFFSET 0x2000 -#endif - -#define CPM_SPI_BASE 0x100 - -#ifdef DEBUG - -#define DPRINT(a) printf a; -/* ----------------------------------------------- - * Helper functions to peek into tx and rx buffers - * ----------------------------------------------- */ -static const char * const hex_digit = "0123456789ABCDEF"; - -static char quickhex (int i) -{ - return hex_digit[i]; -} - -static void memdump (void *pv, int num) -{ - int i; - unsigned char *pc = (unsigned char *) pv; - - for (i = 0; i < num; i++) - printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f)); - printf ("\t"); - for (i = 0; i < num; i++) - printf ("%c", isprint (pc[i]) ? pc[i] : '.'); - printf ("\n"); -} -#else /* !DEBUG */ - -#define DPRINT(a) - -#endif /* DEBUG */ - -/* ------------------- - * Function prototypes - * ------------------- */ -void spi_init (void); - -ssize_t spi_read (uchar *, int, uchar *, int); -ssize_t spi_write (uchar *, int, uchar *, int); -ssize_t spi_xfer (size_t); - -/* ------------------- - * Variables - * ------------------- */ - -#define MAX_BUFFER 0x104 - -/* ---------------------------------------------------------------------- - * Initially we place the RX and TX buffers at a fixed location in DPRAM! - * ---------------------------------------------------------------------- */ -static uchar *rxbuf = - (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase - [CONFIG_SYS_SPI_INIT_OFFSET]; -static uchar *txbuf = - (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase - [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER]; - -/* ************************************************************************** - * - * Function: spi_init_f - * - * Description: Init SPI-Controller (ROM part) - * - * return: --- - * - * *********************************************************************** */ -void spi_init_f (void) -{ - unsigned int dpaddr; - - volatile spi_t *spi; - volatile immap_t *immr; - volatile cpm8260_t *cp; - volatile cbd_t *tbdf, *rbdf; - - immr = (immap_t *) CONFIG_SYS_IMMR; - cp = (cpm8260_t *) &immr->im_cpm; - - immr->im_dprambase16[PROFF_SPI_BASE / sizeof(u16)] = PROFF_SPI; - spi = (spi_t *)&immr->im_dprambase[PROFF_SPI]; - -/* 1 */ - /* ------------------------------------------------ - * Initialize Port D SPI pins - * (we are only in Master Mode !) - * ------------------------------------------------ */ - - /* -------------------------------------------- - * GPIO or per. Function - * PPARD[16] = 1 [0x00008000] (SPIMISO) - * PPARD[17] = 1 [0x00004000] (SPIMOSI) - * PPARD[18] = 1 [0x00002000] (SPICLK) - * PPARD[12] = 0 [0x00080000] -> GPIO: (CS for ATC EEPROM) - * -------------------------------------------- */ - immr->im_ioport.iop_ppard |= 0x0000E000; /* set bits */ - immr->im_ioport.iop_ppard &= ~0x00080000; /* reset bit */ - - /* ---------------------------------------------- - * In/Out or per. Function 0/1 - * PDIRD[16] = 0 [0x00008000] -> PERI1: SPIMISO - * PDIRD[17] = 0 [0x00004000] -> PERI1: SPIMOSI - * PDIRD[18] = 0 [0x00002000] -> PERI1: SPICLK - * PDIRD[12] = 1 [0x00080000] -> GPIO OUT: CS for ATC EEPROM - * ---------------------------------------------- */ - immr->im_ioport.iop_pdird &= ~0x0000E000; - immr->im_ioport.iop_pdird |= 0x00080000; - - /* ---------------------------------------------- - * special option reg. - * PSORD[16] = 1 [0x00008000] -> SPIMISO - * PSORD[17] = 1 [0x00004000] -> SPIMOSI - * PSORD[18] = 1 [0x00002000] -> SPICLK - * ---------------------------------------------- */ - immr->im_ioport.iop_psord |= 0x0000E000; - - /* Initialize the parameter ram. - * We need to make sure many things are initialized to zero - */ - spi->spi_rstate = 0; - spi->spi_rdp = 0; - spi->spi_rbptr = 0; - spi->spi_rbc = 0; - spi->spi_rxtmp = 0; - spi->spi_tstate = 0; - spi->spi_tdp = 0; - spi->spi_tbptr = 0; - spi->spi_tbc = 0; - spi->spi_txtmp = 0; - - dpaddr = CPM_SPI_BASE; - -/* 3 */ - /* Set up the SPI parameters in the parameter ram */ - spi->spi_rbase = dpaddr; - spi->spi_tbase = dpaddr + sizeof (cbd_t); - - /***********IMPORTANT******************/ - - /* - * Setting transmit and receive buffer descriptor pointers - * initially to rbase and tbase. Only the microcode patches - * documentation talks about initializing this pointer. This - * is missing from the sample I2C driver. If you dont - * initialize these pointers, the kernel hangs. - */ - spi->spi_rbptr = spi->spi_rbase; - spi->spi_tbptr = spi->spi_tbase; - -/* 4 */ - /* Init SPI Tx + Rx Parameters */ - while (cp->cp_cpcr & CPM_CR_FLG) - ; - cp->cp_cpcr = mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK, - 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG) - ; - -/* 6 */ - /* Set to big endian. */ - spi->spi_tfcr = CPMFCR_EB; - spi->spi_rfcr = CPMFCR_EB; - -/* 7 */ - /* Set maximum receive size. */ - spi->spi_mrblr = MAX_BUFFER; - -/* 8 + 9 */ - /* tx and rx buffer descriptors */ - tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase]; - rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase]; - - tbdf->cbd_sc &= ~BD_SC_READY; - rbdf->cbd_sc &= ~BD_SC_EMPTY; - - /* Set the bd's rx and tx buffer address pointers */ - rbdf->cbd_bufaddr = (ulong) rxbuf; - tbdf->cbd_bufaddr = (ulong) txbuf; - -/* 10 + 11 */ - immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */ - immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */ - - - return; -} - -/* ************************************************************************** - * - * Function: spi_init_r - * - * Description: Init SPI-Controller (RAM part) - - * The malloc engine is ready and we can move our buffers to - * normal RAM - * - * return: --- - * - * *********************************************************************** */ -void spi_init_r (void) -{ - volatile spi_t *spi; - volatile immap_t *immr; - volatile cbd_t *tbdf, *rbdf; - - immr = (immap_t *) CONFIG_SYS_IMMR; - - spi = (spi_t *)&immr->im_dprambase[PROFF_SPI]; - - /* tx and rx buffer descriptors */ - tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase]; - rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase]; - - /* Allocate memory for RX and TX buffers */ - rxbuf = (uchar *) malloc (MAX_BUFFER); - txbuf = (uchar *) malloc (MAX_BUFFER); - - rbdf->cbd_bufaddr = (ulong) rxbuf; - tbdf->cbd_bufaddr = (ulong) txbuf; - - return; -} - -/**************************************************************************** - * Function: spi_write - **************************************************************************** */ -ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len) -{ - int i; - - memset(rxbuf, 0, MAX_BUFFER); - memset(txbuf, 0, MAX_BUFFER); - *txbuf = SPI_EEPROM_WREN; /* write enable */ - spi_xfer(1); - memcpy(txbuf, addr, alen); - *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */ - memcpy(alen + txbuf, buffer, len); - spi_xfer(alen + len); - /* ignore received data */ - for (i = 0; i < 1000; i++) { - *txbuf = SPI_EEPROM_RDSR; /* read status */ - txbuf[1] = 0; - spi_xfer(2); - if (!(rxbuf[1] & 1)) { - break; - } - udelay(1000); - } - if (i >= 1000) { - printf ("*** spi_write: Time out while writing!\n"); - } - - return len; -} - -/**************************************************************************** - * Function: spi_read - **************************************************************************** */ -ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len) -{ - memset(rxbuf, 0, MAX_BUFFER); - memset(txbuf, 0, MAX_BUFFER); - memcpy(txbuf, addr, alen); - *txbuf = SPI_EEPROM_READ; /* READ memory array */ - - /* - * There is a bug in 860T (?) that cuts the last byte of input - * if we're reading into DPRAM. The solution we choose here is - * to always read len+1 bytes (we have one extra byte at the - * end of the buffer). - */ - spi_xfer(alen + len + 1); - memcpy(buffer, alen + rxbuf, len); - - return len; -} - -/**************************************************************************** - * Function: spi_xfer - **************************************************************************** */ -ssize_t spi_xfer (size_t count) -{ - volatile immap_t *immr; - volatile spi_t *spi; - cbd_t *tbdf, *rbdf; - int tm; - - DPRINT (("*** spi_xfer entered ***\n")); - - immr = (immap_t *) CONFIG_SYS_IMMR; - - spi = (spi_t *)&immr->im_dprambase[PROFF_SPI]; - - tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase]; - rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase]; - - /* Board-specific: Set CS for device (ATC EEPROM) */ - immr->im_ioport.iop_pdatd &= ~0x00080000; - - /* Setting tx bd status and data length */ - tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP; - tbdf->cbd_datlen = count; - - DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", - tbdf->cbd_datlen)); - - /* Setting rx bd status and data length */ - rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP; - rbdf->cbd_datlen = 0; /* rx length has no significance */ - - immr->im_spi.spi_spmode = SPMODE_REV | - SPMODE_MSTR | - SPMODE_EN | - SPMODE_LEN(8) | /* 8 Bits per char */ - SPMODE_PM(0x8) ; /* medium speed */ - immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */ - immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */ - - /* start spi transfer */ - DPRINT (("*** spi_xfer: Performing transfer ...\n")); - immr->im_spi.spi_spcom |= SPI_STR; /* Start transmit */ - - /* -------------------------------- - * Wait for SPI transmit to get out - * or time out (1 second = 1000 ms) - * -------------------------------- */ - for (tm=0; tm<1000; ++tm) { - if (immr->im_spi.spi_spie & SPI_TXB) { /* Tx Buffer Empty */ - DPRINT (("*** spi_xfer: Tx buffer empty\n")); - break; - } - if ((tbdf->cbd_sc & BD_SC_READY) == 0) { - DPRINT (("*** spi_xfer: Tx BD done\n")); - break; - } - udelay (1000); - } - if (tm >= 1000) { - printf ("*** spi_xfer: Time out while xferring to/from SPI!\n"); - } - DPRINT (("*** spi_xfer: ... transfer ended\n")); - -#ifdef DEBUG - printf ("\nspi_xfer: txbuf after xfer\n"); - memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */ - printf ("spi_xfer: rxbuf after xfer\n"); - memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */ - printf ("\n"); -#endif - - /* Clear CS for device */ - immr->im_ioport.iop_pdatd |= 0x00080000; - - return count; -} -#endif /* CONFIG_SPI */ diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S deleted file mode 100644 index d255bde..0000000 --- a/arch/powerpc/cpu/mpc8260/start.S +++ /dev/null @@ -1,901 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek dmalek@jlc.net - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2000, 2001,2002 Wolfgang Denk wd@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * U-Boot - Startup Code for MPC8260 PowerPC based Embedded Boards - */ -#include <asm-offsets.h> -#include <config.h> -#include <mpc8260.h> -#include <version.h> - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> -#include <asm/u-boot.h> - -/* We don't want the MMU yet. -*/ -#undef MSR_KERNEL -/* Floating Point enable, Machine Check and Recoverable Interr. */ -#ifdef DEBUG -#define MSR_KERNEL (MSR_FP|MSR_RI) -#else -#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI) -#endif - -/* - * Set up GOT: Global Offset Table - * - * Use r12 to access the GOT - */ - START_GOT - GOT_ENTRY(_GOT2_TABLE_) - GOT_ENTRY(_FIXUP_TABLE_) - - GOT_ENTRY(_start) - GOT_ENTRY(_start_of_vectors) - GOT_ENTRY(_end_of_vectors) - GOT_ENTRY(transfer_to_handler) - - GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end) - GOT_ENTRY(__bss_start) - END_GOT - -/* - * Version string - must be in data segment because MPC8260 uses the first - * 256 bytes for the Hard Reset Configuration Word table (see below). - * Similarly, can't have the U-Boot Magic Number as the first thing in - * the image - don't know how this will affect the image tools, but I guess - * I'll find out soon - */ - .data - .globl version_string -version_string: - .ascii U_BOOT_VERSION_STRING, "\0" - -/* - * Hard Reset Configuration Word (HRCW) table - * - * The Hard Reset Configuration Word (HRCW) sets a number of useful things - * such as whether there is an external memory controller, whether the - * PowerPC core is disabled (i.e. only the communications processor is - * active, accessed by another CPU on the bus), whether using external - * arbitration, external bus mode, boot port size, core initial prefix, - * internal space base, boot memory space, etc. - * - * These things dictate where the processor begins execution, where the - * boot ROM appears in memory, the memory controller setup when access - * boot ROM, etc. The HRCW is *extremely* important. - * - * The HRCW is read from the bus during reset. One CPU on the bus will - * be a hard reset configuration master, any others will be hard reset - * configuration slaves. The master reads eight HRCWs from flash during - * reset - the first it uses for itself, the other 7 it communicates to - * up to 7 configuration slaves by some complicated mechanism, which is - * not really important here. - * - * The configuration master performs 32 successive reads starting at address - * 0 and incrementing by 8 each read (i.e. on 64 bit boundaries) but only 8 - * bits is read, and always from byte lane D[0-7] (so that port size of the - * boot device does not matter). The first four reads form the 32 bit HRCW - * for the master itself. The second four reads form the HRCW for the first - * slave, and so on, up to seven slaves. The 32 bit HRCW is formed by - * concatenating the four bytes, with the first read placed in byte 0 (the - * most significant byte), and so on with the fourth read placed in byte 3 - * (the least significant byte). - */ -#define _HRCW_TABLE_ENTRY(w) \ - .fill 8,1,(((w)>>24)&0xff); \ - .fill 8,1,(((w)>>16)&0xff); \ - .fill 8,1,(((w)>> 8)&0xff); \ - .fill 8,1,(((w) )&0xff) - .text - .globl _hrcw_table -_hrcw_table: - _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_MASTER) - _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE1) - _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE2) - _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE3) - _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE4) - _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE5) - _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE6) - _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE7) -/* - * After configuration, a system reset exception is executed using the - * vector at offset 0x100 relative to the base set by MSR[IP]. If MSR[IP] - * is 0, the base address is 0x00000000. If MSR[IP] is 1, the base address - * is 0xfff00000. In the case of a Power On Reset or Hard Reset, the value - * of MSR[IP] is determined by the CIP field in the HRCW. - * - * Other bits in the HRCW set up the Base Address and Port Size in BR0. - * This determines the location of the boot ROM (flash or EPROM) in the - * processor's address space at boot time. As long as the HRCW is set up - * so that we eventually end up executing the code below when the processor - * executes the reset exception, the actual values used should not matter. - * - * Once we have got here, the address mask in OR0 is cleared so that the - * bottom 32K of the boot ROM is effectively repeated all throughout the - * processor's address space, after which we can jump to the absolute - * address at which the boot ROM was linked at compile time, and proceed - * to initialise the memory controller without worrying if the rug will be - * pulled out from under us, so to speak (it will be fine as long as we - * configure BR0 with the same boot ROM link address). - */ - . = EXC_OFF_SYS_RESET - - .globl _start -_start: - mfmsr r5 /* save msr contents */ - -#if defined(CONFIG_SYS_DEFAULT_IMMR) - lis r3, CONFIG_SYS_IMMR@h - ori r3, r3, CONFIG_SYS_IMMR@l - lis r4, CONFIG_SYS_DEFAULT_IMMR@h - stw r3, 0x1A8(r4) -#endif /* CONFIG_SYS_DEFAULT_IMMR */ - - /* Initialise the MPC8260 processor core */ - /*--------------------------------------------------------------*/ - - bl init_8260_core - -#ifndef CONFIG_SYS_RAMBOOT - /* When booting from ROM (Flash or EPROM), clear the */ - /* Address Mask in OR0 so ROM appears everywhere */ - /*--------------------------------------------------------------*/ - - lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h - lwz r4, IM_OR0@l(r3) - li r5, 0x7fff - and r4, r4, r5 - stw r4, IM_OR0@l(r3) - - /* Calculate absolute address in FLASH and jump there */ - /*--------------------------------------------------------------*/ - - lis r3, CONFIG_SYS_MONITOR_BASE@h - ori r3, r3, CONFIG_SYS_MONITOR_BASE@l - addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET - mtlr r3 - blr - -in_flash: -#endif /* CONFIG_SYS_RAMBOOT */ - - /* initialize some things that are hard to access from C */ - /*--------------------------------------------------------------*/ - - lis r3, CONFIG_SYS_IMMR@h /* set up stack in internal DPRAM */ - ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET - li r0, 0 /* Make room for stack frame header and */ - stwu r0, -4(r1) /* clear final stack frame so that */ - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ - - /* let the C-code set up the rest */ - /* */ - /* Be careful to keep code relocatable ! */ - /*--------------------------------------------------------------*/ - - GET_GOT /* initialize GOT access */ - - /* r3: IMMR */ - bl cpu_init_f /* run low-level CPU init code (in Flash)*/ - -#ifdef DEBUG - bl init_debug /* set up debugging stuff */ -#endif - - bl board_init_f /* run 1st part of board init code (in Flash)*/ - - /* NOTREACHED - board_init_f() does not return */ - -/* - * Vector Table - */ - - .globl _start_of_vectors -_start_of_vectors: - -/* Machine check */ - STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG(SRR0, SRR1) - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG(SRR0, SRR1) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, - MSR_KERNEL, COPY_EE) - - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - - /* I guess we could implement decrementer, and may have - * to someday for timekeeping. - */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - - STD_EXCEPTION(0xa00, Trap_0a, UnknownException) - STD_EXCEPTION(0xb00, Trap_0b, UnknownException) - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - STD_EXCEPTION(0xd00, SingleStep, UnknownException) - - STD_EXCEPTION(0xe00, Trap_0e, UnknownException) - STD_EXCEPTION(0xf00, Trap_0f, UnknownException) - - STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException) - STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException) - STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException) -#ifdef DEBUG - . = 0x1300 - /* - * This exception occurs when the program counter matches the - * Instruction Address Breakpoint Register (IABR). - * - * I want the cpu to halt if this occurs so I can hunt around - * with the debugger and look at things. - * - * When DEBUG is defined, both machine check enable (in the MSR) - * and checkstop reset enable (in the reset mode register) are - * turned off and so a checkstop condition will result in the cpu - * halting. - * - * I force the cpu into a checkstop condition by putting an illegal - * instruction here (at least this is the theory). - * - * well - that didnt work, so just do an infinite loop! - */ -1: b 1b -#else - STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException) -#endif - STD_EXCEPTION(0x1400, SMI, UnknownException) - - STD_EXCEPTION(0x1500, Trap_15, UnknownException) - STD_EXCEPTION(0x1600, Trap_16, UnknownException) - STD_EXCEPTION(0x1700, Trap_17, UnknownException) - STD_EXCEPTION(0x1800, Trap_18, UnknownException) - STD_EXCEPTION(0x1900, Trap_19, UnknownException) - STD_EXCEPTION(0x1a00, Trap_1a, UnknownException) - STD_EXCEPTION(0x1b00, Trap_1b, UnknownException) - STD_EXCEPTION(0x1c00, Trap_1c, UnknownException) - STD_EXCEPTION(0x1d00, Trap_1d, UnknownException) - STD_EXCEPTION(0x1e00, Trap_1e, UnknownException) - STD_EXCEPTION(0x1f00, Trap_1f, UnknownException) - STD_EXCEPTION(0x2000, Trap_20, UnknownException) - STD_EXCEPTION(0x2100, Trap_21, UnknownException) - STD_EXCEPTION(0x2200, Trap_22, UnknownException) - STD_EXCEPTION(0x2300, Trap_23, UnknownException) - STD_EXCEPTION(0x2400, Trap_24, UnknownException) - STD_EXCEPTION(0x2500, Trap_25, UnknownException) - STD_EXCEPTION(0x2600, Trap_26, UnknownException) - STD_EXCEPTION(0x2700, Trap_27, UnknownException) - STD_EXCEPTION(0x2800, Trap_28, UnknownException) - STD_EXCEPTION(0x2900, Trap_29, UnknownException) - STD_EXCEPTION(0x2a00, Trap_2a, UnknownException) - STD_EXCEPTION(0x2b00, Trap_2b, UnknownException) - STD_EXCEPTION(0x2c00, Trap_2c, UnknownException) - STD_EXCEPTION(0x2d00, Trap_2d, UnknownException) - STD_EXCEPTION(0x2e00, Trap_2e, UnknownException) - STD_EXCEPTION(0x2f00, Trap_2f, UnknownException) - - - .globl _end_of_vectors -_end_of_vectors: - - . = 0x3000 - -/* - * This code finishes saving the registers to the exception frame - * and jumps to the appropriate handler for the exception. - * Register r21 is pointer into trap frame, r1 has new stack pointer. - */ - .globl transfer_to_handler -transfer_to_handler: - stw r22,_NIP(r21) - lis r22,MSR_POW@h - andc r23,r23,r22 - stw r23,_MSR(r21) - SAVE_GPR(7, r21) - SAVE_4GPRS(8, r21) - SAVE_8GPRS(12, r21) - SAVE_8GPRS(24, r21) - mflr r23 - andi. r24,r23,0x3f00 /* get vector offset */ - stw r24,TRAP(r21) - li r22,0 - stw r22,RESULT(r21) - lwz r24,0(r23) /* virtual address of handler */ - lwz r23,4(r23) /* where to go when done */ - mtspr SRR0,r24 - mtspr SRR1,r20 - mtlr r23 - SYNC - rfi /* jump to handler, enable MMU */ - -int_return: - mfmsr r28 /* Disable interrupts */ - li r4,0 - ori r4,r4,MSR_EE - andc r28,r28,r4 - SYNC /* Some chip revs need this... */ - mtmsr r28 - SYNC - lwz r2,_CTR(r1) - lwz r0,_LINK(r1) - mtctr r2 - mtlr r0 - lwz r2,_XER(r1) - lwz r0,_CCR(r1) - mtspr XER,r2 - mtcrf 0xFF,r0 - REST_10GPRS(3, r1) - REST_10GPRS(13, r1) - REST_8GPRS(23, r1) - REST_GPR(31, r1) - lwz r2,_NIP(r1) /* Restore environment */ - lwz r0,_MSR(r1) - mtspr SRR0,r2 - mtspr SRR1,r0 - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - lwz r1,GPR1(r1) - SYNC - rfi - -/* - * This code initialises the MPC8260 processor core - * (conforms to PowerPC 603e spec) - * Note: expects original MSR contents to be in r5. - */ - - .globl init_8260_core -init_8260_core: - - /* Initialize machine status; enable machine check interrupt */ - /*--------------------------------------------------------------*/ - - li r3, MSR_KERNEL /* Set ME and RI flags */ - rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */ -#ifdef DEBUG - rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */ -#endif - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - mtspr SRR1, r3 /* Make SRR1 match MSR */ - - /* Initialise the SYPCR early, and reset the watchdog (if req) */ - /*--------------------------------------------------------------*/ - - lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h - lis r4, CONFIG_SYS_SYPCR@h - ori r4, r4, CONFIG_SYS_SYPCR@l - stw r4, IM_SYPCR@l(r3) -#if defined(CONFIG_WATCHDOG) - li r4, 21868 /* = 0x556c */ - sth r4, IM_SWSR@l(r3) - li r4, -21959 /* = 0xaa39 */ - sth r4, IM_SWSR@l(r3) -#endif /* CONFIG_WATCHDOG */ - - /* Initialize the Hardware Implementation-dependent Registers */ - /* HID0 also contains cache control */ - /*--------------------------------------------------------------*/ - - lis r3, CONFIG_SYS_HID0_INIT@h - ori r3, r3, CONFIG_SYS_HID0_INIT@l - SYNC - mtspr HID0, r3 - - lis r3, CONFIG_SYS_HID0_FINAL@h - ori r3, r3, CONFIG_SYS_HID0_FINAL@l - SYNC - mtspr HID0, r3 - - lis r3, CONFIG_SYS_HID2@h - ori r3, r3, CONFIG_SYS_HID2@l - mtspr HID2, r3 - - /* clear all BAT's */ - /*--------------------------------------------------------------*/ - - li r0, 0 - mtspr DBAT0U, r0 - mtspr DBAT0L, r0 - mtspr DBAT1U, r0 - mtspr DBAT1L, r0 - mtspr DBAT2U, r0 - mtspr DBAT2L, r0 - mtspr DBAT3U, r0 - mtspr DBAT3L, r0 - mtspr IBAT0U, r0 - mtspr IBAT0L, r0 - mtspr IBAT1U, r0 - mtspr IBAT1L, r0 - mtspr IBAT2U, r0 - mtspr IBAT2L, r0 - mtspr IBAT3U, r0 - mtspr IBAT3L, r0 - SYNC - - /* invalidate all tlb's */ - /* */ - /* From the 603e User Manual: "The 603e provides the ability to */ - /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */ - /* instruction invalidates the TLB entry indexed by the EA, and */ - /* operates on both the instruction and data TLBs simultaneously*/ - /* invalidating four TLB entries (both sets in each TLB). The */ - /* index corresponds to bits 15-19 of the EA. To invalidate all */ - /* entries within both TLBs, 32 tlbie instructions should be */ - /* issued, incrementing this field by one each time." */ - /* */ - /* "Note that the tlbia instruction is not implemented on the */ - /* 603e." */ - /* */ - /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */ - /* incrementing by 0x1000 each time. The code below is sort of */ - /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */ - /* */ - /*--------------------------------------------------------------*/ - - li r3, 32 - mtctr r3 - li r3, 0 -1: tlbie r3 - addi r3, r3, 0x1000 - bdnz 1b - SYNC - - /* Done! */ - /*--------------------------------------------------------------*/ - - blr - -#ifdef DEBUG - -/* - * initialise things related to debugging. - * - * must be called after the global offset table (GOT) is initialised - * (GET_GOT) and after cpu_init_f() has executed. - */ - - .globl init_debug -init_debug: - - lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h - - /* Quick and dirty hack to enable the RAM and copy the */ - /* vectors so that we can take exceptions. */ - /*--------------------------------------------------------------*/ - /* write Memory Refresh Prescaler */ - li r4, CONFIG_SYS_MPTPR - sth r4, IM_MPTPR@l(r3) - /* write 60x Refresh Timer */ - li r4, CONFIG_SYS_PSRT - stb r4, IM_PSRT@l(r3) - /* init the 60x SDRAM Mode Register */ - lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@h - ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@l - stw r4, IM_PSDMR@l(r3) - /* write Precharge All Banks command */ - lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@h - ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@l - stw r4, IM_PSDMR@l(r3) - stb r0, 0(0) - /* write eight CBR Refresh commands */ - lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@h - ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@l - stw r4, IM_PSDMR@l(r3) - stb r0, 0(0) - stb r0, 0(0) - stb r0, 0(0) - stb r0, 0(0) - stb r0, 0(0) - stb r0, 0(0) - stb r0, 0(0) - stb r0, 0(0) - /* write Mode Register Write command */ - lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@h - ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@l - stw r4, IM_PSDMR@l(r3) - stb r0, 0(0) - /* write Normal Operation command and enable Refresh */ - lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@h - ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@l - stw r4, IM_PSDMR@l(r3) - stb r0, 0(0) - /* RAM should now be operational */ - -#define VEC_WRD_CNT ((_end_of_vectors - _start + EXC_OFF_SYS_RESET) / 4) - mflr r3 - GET_GOT - mtlr r3 - lwz r3, GOT(_end_of_vectors) - rlwinm r4, r3, 0, 18, 31 /* _end_of_vectors & 0x3FFF */ - lis r5, VEC_WRD_CNT@h - ori r5, r5, VEC_WRD_CNT@l - mtctr r5 -1: - lwzu r5, -4(r3) - stwu r5, -4(r4) - bdnz 1b - - /* Load the Instruction Address Breakpoint Register (IABR). */ - /* */ - /* The address to load is stored in the first word of dual port */ - /* ram and should be preserved while the power is on, so you */ - /* can plug addresses into that location then reset the cpu and */ - /* this code will load that address into the IABR after the */ - /* reset. */ - /* */ - /* When the program counter matches the contents of the IABR, */ - /* an exception is generated (before the instruction at that */ - /* location completes). The vector for this exception is 0x1300 */ - /*--------------------------------------------------------------*/ - lis r3, CONFIG_SYS_IMMR@h - lwz r3, 0(r3) - mtspr IABR, r3 - - /* Set the entire dual port RAM (where the initial stack */ - /* resides) to a known value - makes it easier to see where */ - /* the stack has been written */ - /*--------------------------------------------------------------*/ - lis r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@h - ori r3, r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@l - li r4, ((CONFIG_SYS_INIT_SP_OFFSET - 4) / 4) - mtctr r4 - lis r4, 0xdeadbeaf@h - ori r4, r4, 0xdeadbeaf@l -1: - stwu r4, -4(r3) - bdnz 1b - - /* Done! */ - /*--------------------------------------------------------------*/ - - blr -#endif - -/* Cache functions. - * - * Note: requires that all cache bits in - * HID0 are in the low half word. - */ - .globl icache_enable -icache_enable: - mfspr r3, HID0 - ori r3, r3, HID0_ICE - lis r4, 0 - ori r4, r4, HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets enable and invalidate, clears lock */ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_disable -icache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_ICE|HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets invalidate, clears enable and lock */ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_status -icache_status: - mfspr r3, HID0 - rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31 - blr - - .globl dcache_enable -dcache_enable: - mfspr r3, HID0 - ori r3, r3, HID0_DCE - lis r4, 0 - ori r4, r4, HID0_DLOCK - andc r3, r3, r4 - ori r4, r3, HID0_DCI - sync - mtspr HID0, r4 /* sets enable and invalidate, clears lock */ - sync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl dcache_disable -dcache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_DCE|HID0_DLOCK - andc r3, r3, r4 - ori r4, r3, HID0_DCI - sync - mtspr HID0, r4 /* sets invalidate, clears enable and lock */ - sync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl dcache_status -dcache_status: - mfspr r3, HID0 - rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31 - blr - - .globl get_pvr -get_pvr: - mfspr r3, PVR - blr - -/*------------------------------------------------------------------------------*/ - -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ - .globl relocate_code -relocate_code: - mr r1, r3 /* Set new stack pointer */ - mr r9, r4 /* Save copy of Global Data pointer */ - mr r10, r5 /* Save copy of Destination Address */ - - GET_GOT - mr r3, r5 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ - - /* - * Fix GOT pointer: - * - * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address - * - * Offset: - */ - sub r15, r10, r4 - - /* First our own GOT */ - add r12, r12, r15 - /* then the one used by the C code */ - add r30, r30, r15 - - /* - * Now relocate code - */ - - cmplw cr1,r3,r4 - addi r0,r5,3 - srwi. r0,r0,2 - beq cr1,4f /* In place copy is not necessary */ - beq 7f /* Protect against 0 count */ - mtctr r0 - bge cr1,2f - - la r8,-4(r4) - la r7,-4(r3) -1: lwzu r0,4(r8) - stwu r0,4(r7) - bdnz 1b - b 4f - -2: slwi r0,r0,2 - add r8,r4,r0 - add r7,r3,r0 -3: lwzu r0,-4(r8) - stwu r0,-4(r7) - bdnz 3b - -/* - * Now flush the cache: note that we must start from a cache aligned - * address. Otherwise we might miss one cache line. - */ -4: cmpwi r6,0 - add r5,r3,r5 - beq 7f /* Always flush prefetch queue in any case */ - subi r0,r6,1 - andc r3,r3,r0 - mfspr r7,HID0 /* don't do dcbst if dcache is disabled */ - rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31 - cmpwi r7,0 - beq 9f - mr r4,r3 -5: dcbst 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 5b - sync /* Wait for all dcbst to complete on bus */ -9: mfspr r7,HID0 /* don't do icbi if icache is disabled */ - rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31 - cmpwi r7,0 - beq 7f - mr r4,r3 -6: icbi 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 6b -7: sync /* Wait for all icbi to complete on bus */ - isync - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET - mtlr r0 - blr - -in_ram: - - /* - * Relocation Function, r12 point to got2+0x8000 - * - * Adjust got2 pointers, no need to check for 0, this code - * already puts a few entries in the table. - */ - li r0,__got2_entries@sectoff@l - la r3,GOT(_GOT2_TABLE_) - lwz r11,GOT(_GOT2_TABLE_) - mtctr r0 - sub r11,r3,r11 - addi r3,r3,-4 -1: lwzu r0,4(r3) - cmpwi r0,0 - beq- 2f - add r0,r0,r11 - stw r0,0(r3) -2: bdnz 1b - - /* - * Now adjust the fixups and the pointers to the fixups - * in case we need to move ourselves again. - */ - li r0,__fixup_entries@sectoff@l - lwz r3,GOT(_FIXUP_TABLE_) - cmpwi r0,0 - mtctr r0 - addi r3,r3,-4 - beq 4f -3: lwzu r4,4(r3) - lwzux r0,r4,r11 - cmpwi r0,0 - add r0,r0,r11 - stw r4,0(r3) - beq- 5f - stw r0,0(r4) -5: bdnz 3b -4: -clear_bss: - /* - * Now clear BSS segment - */ - lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end) - - cmplw 0, r3, r4 - beq 6f - - li r0, 0 -5: - stw r0, 0(r3) - addi r3, r3, 4 - cmplw 0, r3, r4 - bne 5b -6: - - mr r3, r9 /* Global Data pointer */ - mr r4, r10 /* Destination Address */ - bl board_init_r - - /* - * Copy exception vector code to low memory - * - * r3: dest_addr - * r7: source address, r8: end address, r9: target address - */ - .globl trap_init -trap_init: - mflr r4 /* save link register */ - GET_GOT - lwz r7, GOT(_start) - lwz r8, GOT(_end_of_vectors) - - li r9, 0x100 /* reset vector always at 0x100 */ - - cmplw 0, r7, r8 - bgelr /* return if r7>=r8 - just in case */ -1: - lwz r0, 0(r7) - stw r0, 0(r9) - addi r7, r7, 4 - addi r9, r9, 4 - cmplw 0, r7, r8 - bne 1b - - /* - * relocate `hdlr' and `int_return' entries - */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET -2: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 2b - - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b - - li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b - - mfmsr r3 /* now that the vectors have */ - lis r7, MSR_IP@h /* relocated into low memory */ - ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */ - andc r3, r3, r7 /* (if it was on) */ - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - - mtlr r4 /* restore link register */ - blr diff --git a/arch/powerpc/cpu/mpc8260/traps.c b/arch/powerpc/cpu/mpc8260/traps.c deleted file mode 100644 index cbcf533..0000000 --- a/arch/powerpc/cpu/mpc8260/traps.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * linux/arch/powerpc/kernel/traps.c - * - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modified by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras (paulus@cs.anu.edu.au) - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This file handles the architecture-dependent parts of hardware exceptions - */ - -#include <common.h> -#include <command.h> -#include <kgdb.h> -#include <asm/processor.h> -#include <asm/m8260_pci.h> - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - -/* THIS NEEDS CHANGING to use the board info structure. -*/ -#define END_OF_MEM 0x02000000 - -/* - * Trap & Exception support - */ - -static void print_backtrace(unsigned long *sp) -{ - int cnt = 0; - unsigned long i; - - puts ("Call backtrace: "); - while (sp) { - if ((uint)sp > END_OF_MEM) - break; - - i = sp[1]; - if (cnt++ % 7 == 0) - putc ('\n'); - printf("%08lX ", i); - if (cnt > 32) break; - sp = (unsigned long *)*sp; - } - putc ('\n'); -} - -void show_regs(struct pt_regs *regs) -{ - int i; - - printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", - regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", - regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, - regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, - regs->msr&MSR_IR ? 1 : 0, - regs->msr&MSR_DR ? 1 : 0); - - putc ('\n'); - for (i = 0; i < 32; i++) { - if ((i % 8) == 0) { - printf("GPR%02d: ", i); - } - - printf("%08lX ", regs->gpr[i]); - if ((i % 8) == 7) { - putc ('\n'); - } - } -} - - -static void _exception(int signr, struct pt_regs *regs) -{ - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Exception in kernel pc %lx signal %d",regs->nip,signr); -} - -#ifdef CONFIG_PCI -void dump_pci (void) -{ - - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - printf ("PCI: err status %x err mask %x err ctrl %x\n", - le32_to_cpu (immap->im_pci.pci_esr), - le32_to_cpu (immap->im_pci.pci_emr), - le32_to_cpu (immap->im_pci.pci_ecr)); - printf (" error address %x error data %x ctrl %x\n", - le32_to_cpu (immap->im_pci.pci_eacr), - le32_to_cpu (immap->im_pci.pci_edcr), - le32_to_cpu (immap->im_pci.pci_eccr)); - -} -#endif - -void MachineCheckException(struct pt_regs *regs) -{ - unsigned long fixup; - - /* Probing PCI using config cycles cause this exception - * when a device is not present. Catch it and return to - * the PCI exception handler. - */ -#ifdef CONFIG_PCI - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; -#ifdef DEBUG - dump_pci(); -#endif - /* clear the error in the error status register */ - if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) { - immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP); - return; - } -#endif - if ((fixup = search_exception_table(regs->nip)) != 0) { - regs->nip = fixup; - return; - } - -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - - puts ("Machine check in kernel mode.\n" - "Caused by (from msr): "); - printf("regs %p ",regs); - switch( regs->msr & 0x000F0000) { - case (0x80000000>>12): - puts ("Machine check signal - probably due to mm fault\n" - "with mmu off\n"); - break; - case (0x80000000>>13): - puts ("Transfer error ack signal\n"); - break; - case (0x80000000>>14): - puts ("Data parity signal\n"); - break; - case (0x80000000>>15): - puts ("Address parity signal\n"); - break; - default: - puts ("Unknown values in msr\n"); - } - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); -#ifdef CONFIG_PCI - dump_pci(); -#endif - panic("machine check"); -} - -void AlignmentException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Alignment Exception"); -} - -void ProgramCheckException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Program Check Exception"); -} - -void SoftEmuException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Software Emulation Exception"); -} - - -void UnknownException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", - regs->nip, regs->msr, regs->trap); - _exception(0, regs); -} - -#if defined(CONFIG_CMD_BEDBUG) -extern void do_bedbug_breakpoint(struct pt_regs *); -#endif - -void DebugException(struct pt_regs *regs) -{ - - printf("Debugger trap at @ %lx\n", regs->nip ); - show_regs(regs); -#if defined(CONFIG_CMD_BEDBUG) - do_bedbug_breakpoint( regs ); -#endif -} - -/* Probe an address by reading. If not present, return -1, otherwise - * return 0. - */ -int addr_probe(uint *addr) -{ -#if 0 - int retval; - - __asm__ __volatile__( \ - "1: lwz %0,0(%1)\n" \ - " eieio\n" \ - " li %0,0\n" \ - "2:\n" \ - ".section .fixup,"ax"\n" \ - "3: li %0,-1\n" \ - " b 2b\n" \ - ".section __ex_table,"a"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".text" \ - : "=r" (retval) : "r"(addr)); - - return (retval); -#endif - return 0; -} diff --git a/arch/powerpc/cpu/mpc8260/u-boot.lds b/arch/powerpc/cpu/mpc8260/u-boot.lds deleted file mode 100644 index 469fc29..0000000 --- a/arch/powerpc/cpu/mpc8260/u-boot.lds +++ /dev/null @@ -1,74 +0,0 @@ -/* - * (C) Copyright 2001-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - .text : - { - arch/powerpc/cpu/mpc8260/start.o (.text*) - *(.text*) - . = ALIGN(16); - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index ff31289..2fed4a1 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -140,7 +140,7 @@ ppcDWload:
#ifndef CONFIG_DEFAULT_IMMR #error CONFIG_DEFAULT_IMMR must be defined -#endif /* CONFIG_SYS_DEFAULT_IMMR */ +#endif /* CONFIG_DEFAULT_IMMR */ #ifndef CONFIG_SYS_IMMR #define CONFIG_SYS_IMMR CONFIG_DEFAULT_IMMR #endif /* CONFIG_SYS_IMMR */ diff --git a/arch/powerpc/include/asm/cpm_8260.h b/arch/powerpc/include/asm/cpm_8260.h deleted file mode 100644 index 4f78186..0000000 --- a/arch/powerpc/include/asm/cpm_8260.h +++ /dev/null @@ -1,795 +0,0 @@ -/* - * MPC8260 Communication Processor Module. - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * - * This file contains structures and information for the communication - * processor channels found in the dual port RAM or parameter RAM. - * All CPM control and status is available through the MPC8260 internal - * memory map. See immap.h for details. - */ -#ifndef __CPM_82XX__ -#define __CPM_82XX__ - -#include <asm/immap_8260.h> - -/* CPM Command register. -*/ -#define CPM_CR_RST ((uint)0x80000000) -#define CPM_CR_PAGE ((uint)0x7c000000) -#define CPM_CR_SBLOCK ((uint)0x03e00000) -#define CPM_CR_FLG ((uint)0x00010000) -#define CPM_CR_MCN ((uint)0x00003fc0) -#define CPM_CR_OPCODE ((uint)0x0000000f) - -/* Device sub-block and page codes. -*/ -#define CPM_CR_SCC1_SBLOCK (0x04) -#define CPM_CR_SCC2_SBLOCK (0x05) -#define CPM_CR_SCC3_SBLOCK (0x06) -#define CPM_CR_SCC4_SBLOCK (0x07) -#define CPM_CR_SMC1_SBLOCK (0x08) -#define CPM_CR_SMC2_SBLOCK (0x09) -#define CPM_CR_SPI_SBLOCK (0x0a) -#define CPM_CR_I2C_SBLOCK (0x0b) -#define CPM_CR_TIMER_SBLOCK (0x0f) -#define CPM_CR_RAND_SBLOCK (0x0e) -#define CPM_CR_FCC1_SBLOCK (0x10) -#define CPM_CR_FCC2_SBLOCK (0x11) -#define CPM_CR_FCC3_SBLOCK (0x12) -#define CPM_CR_IDMA1_SBLOCK (0x14) -#define CPM_CR_IDMA2_SBLOCK (0x15) -#define CPM_CR_IDMA3_SBLOCK (0x16) -#define CPM_CR_IDMA4_SBLOCK (0x17) -#define CPM_CR_MCC1_SBLOCK (0x1c) - -#define CPM_CR_SCC1_PAGE (0x00) -#define CPM_CR_SCC2_PAGE (0x01) -#define CPM_CR_SCC3_PAGE (0x02) -#define CPM_CR_SCC4_PAGE (0x03) -#define CPM_CR_SMC1_PAGE (0x07) -#define CPM_CR_SMC2_PAGE (0x08) -#define CPM_CR_SPI_PAGE (0x09) -#define CPM_CR_I2C_PAGE (0x0a) -#define CPM_CR_TIMER_PAGE (0x0a) -#define CPM_CR_RAND_PAGE (0x0a) -#define CPM_CR_FCC1_PAGE (0x04) -#define CPM_CR_FCC2_PAGE (0x05) -#define CPM_CR_FCC3_PAGE (0x06) -#define CPM_CR_IDMA1_PAGE (0x07) -#define CPM_CR_IDMA2_PAGE (0x08) -#define CPM_CR_IDMA3_PAGE (0x09) -#define CPM_CR_IDMA4_PAGE (0x0a) -#define CPM_CR_MCC1_PAGE (0x07) -#define CPM_CR_MCC2_PAGE (0x08) - -/* Some opcodes (there are more...later) -*/ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_SET_GADDR ((ushort)0x0008) - -#define mk_cr_cmd(PG, SBC, MCN, OP) \ - ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) - -/* Dual Port RAM addresses. The first 16K is available for almost - * any CPM use, so we put the BDs there. The first 128 bytes are - * used for SMC1 and SMC2 parameter RAM, so we start allocating - * BDs above that. All of this must change when we start - * downloading RAM microcode. - */ -#define CPM_DATAONLY_BASE ((uint)128) -#define CPM_DP_NOSPACE ((uint)0x7fffffff) -#ifndef CONFIG_MPC8272_FAMILY -#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE) -#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000) -#else /* 8247/48/71/72 */ -#define CPM_DATAONLY_SIZE ((uint)(4 * 1024) - CPM_DATAONLY_BASE) -#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000) -#endif /* !CONFIG_MPC8272_FAMILY */ - -/* The number of pages of host memory we allocate for CPM. This is - * done early in kernel initialization to get physically contiguous - * pages. - */ -#define NUM_CPM_HOST_PAGES 2 - - -/* Export the base address of the communication processor registers - * and dual port ram. - */ -extern cpm8260_t *cpmp; /* Pointer to comm processor */ -uint m8260_cpm_dpalloc(uint size, uint align); -uint m8260_cpm_hostalloc(uint size, uint align); -void m8260_cpm_setbrg(uint brg, uint rate); -void m8260_cpm_fastbrg(uint brg, uint rate, int div16); -void m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel); - -/* Buffer descriptors used by many of the CPM protocols. -*/ -typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ -} cbd_t; - -#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ -#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ -#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ -#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ -#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */ -#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ -#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ -#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ -#define BD_SC_BR ((ushort)0x0020) /* Break received */ -#define BD_SC_FR ((ushort)0x0010) /* Framing error */ -#define BD_SC_PR ((ushort)0x0008) /* Parity error */ -#define BD_SC_OV ((ushort)0x0002) /* Overrun */ -#define BD_SC_CD ((ushort)0x0001) /* ?? */ - -/* Function code bits, usually generic to devices. -*/ -#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ -#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ -#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ -#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ -#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ - -/* Parameter RAM offsets from the base. -*/ -#ifndef CONFIG_SYS_CPM_POST_WORD_ADDR -#define CPM_POST_WORD_ADDR 0x80FC /* steal a long at the end of SCC1 */ -#else -#define CPM_POST_WORD_ADDR CONFIG_SYS_CPM_POST_WORD_ADDR -#endif - -#ifndef CONFIG_SYS_CPM_BOOTCOUNT_ADDR -#define CPM_BOOTCOUNT_ADDR (CPM_POST_WORD_ADDR - 2*sizeof(ulong)) -#else -#define CPM_BOOTCOUNT_ADDR CONFIG_SYS_CPM_BOOTCOUNT_ADDR -#endif - -#define PROFF_SCC1 ((uint)0x8000) -#define PROFF_SCC2 ((uint)0x8100) -#define PROFF_SCC3 ((uint)0x8200) -#define PROFF_SCC4 ((uint)0x8300) -#define PROFF_FCC1 ((uint)0x8400) -#define PROFF_FCC2 ((uint)0x8500) -#define PROFF_FCC3 ((uint)0x8600) -#define PROFF_MCC1 ((uint)0x8700) -#define PROFF_SMC1_BASE ((uint)0x87fc) -#define PROFF_IDMA1_BASE ((uint)0x87fe) -#define PROFF_MCC2 ((uint)0x8800) -#define PROFF_SMC2_BASE ((uint)0x88fc) -#define PROFF_IDMA2_BASE ((uint)0x88fe) -#define PROFF_SPI_BASE ((uint)0x89fc) -#define PROFF_IDMA3_BASE ((uint)0x89fe) -#define PROFF_TIMERS ((uint)0x8ae0) -#define PROFF_REVNUM ((uint)0x8af0) -#define PROFF_RAND ((uint)0x8af8) -#define PROFF_I2C_BASE ((uint)0x8afc) -#define PROFF_IDMA4_BASE ((uint)0x8afe) - -/* The SMCs are relocated to any of the first eight DPRAM pages. - * We will fix these at the first locations of DPRAM, until we - * get some microcode patches :-). - * The parameter ram space for the SMCs is fifty-some bytes, and - * they are required to start on a 64 byte boundary. - */ -#define PROFF_SMC1 (0) -#define PROFF_SMC2 (64) -#define PROFF_SPI ((16*1024) - 128) - -/* Define enough so I can at least use the serial port as a UART. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ - uint smc_stmp; /* SDMA Temp */ -} smc_uart_t; - -/* SMC uart mode register (Internal memory map). -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC Event and Mask register. -*/ -#define SMCM_TXE ((unsigned char)0x10) -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - -/* CPM Ethernet through SCC1. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PSMR) as used by Ethernet. -*/ -#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* Buffer descriptor control/status used by Ethernet receive. - * Common to SCC and FCC. - */ -#define BD_ENET_RX_EMPTY ((ushort)0x8000) -#define BD_ENET_RX_WRAP ((ushort)0x2000) -#define BD_ENET_RX_INTR ((ushort)0x1000) -#define BD_ENET_RX_LAST ((ushort)0x0800) -#define BD_ENET_RX_FIRST ((ushort)0x0400) -#define BD_ENET_RX_MISS ((ushort)0x0100) -#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */ -#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */ -#define BD_ENET_RX_LG ((ushort)0x0020) -#define BD_ENET_RX_NO ((ushort)0x0010) -#define BD_ENET_RX_SH ((ushort)0x0008) -#define BD_ENET_RX_CR ((ushort)0x0004) -#define BD_ENET_RX_OV ((ushort)0x0002) -#define BD_ENET_RX_CL ((ushort)0x0001) -#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */ - -/* Buffer descriptor control/status used by Ethernet transmit. - * Common to SCC and FCC. - */ -#define BD_ENET_TX_READY ((ushort)0x8000) -#define BD_ENET_TX_PAD ((ushort)0x4000) -#define BD_ENET_TX_WRAP ((ushort)0x2000) -#define BD_ENET_TX_INTR ((ushort)0x1000) -#define BD_ENET_TX_LAST ((ushort)0x0800) -#define BD_ENET_TX_TC ((ushort)0x0400) -#define BD_ENET_TX_DEF ((ushort)0x0200) -#define BD_ENET_TX_HB ((ushort)0x0100) -#define BD_ENET_TX_LC ((ushort)0x0080) -#define BD_ENET_TX_RL ((ushort)0x0040) -#define BD_ENET_TX_RCMASK ((ushort)0x003c) -#define BD_ENET_TX_UN ((ushort)0x0002) -#define BD_ENET_TX_CSL ((ushort)0x0001) -#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - uint scc_res1; /* Reserved */ - uint scc_res2; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PSMR when used as a UART. -*/ -#define SCU_PSMR_FLC ((ushort)0x8000) -#define SCU_PSMR_SL ((ushort)0x4000) -#define SCU_PSMR_CL ((ushort)0x3000) -#define SCU_PSMR_UM ((ushort)0x0c00) -#define SCU_PSMR_FRZ ((ushort)0x0200) -#define SCU_PSMR_RZS ((ushort)0x0100) -#define SCU_PSMR_SYN ((ushort)0x0080) -#define SCU_PSMR_DRT ((ushort)0x0040) -#define SCU_PSMR_PEN ((ushort)0x0010) -#define SCU_PSMR_RPM ((ushort)0x000c) -#define SCU_PSMR_REVP ((ushort)0x0008) -#define SCU_PSMR_TPM ((ushort)0x0003) -#define SCU_PSMR_TEVP ((ushort)0x0003) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -#define BD_SCC_TX_LAST ((ushort)0x0800) - -/* SCC as HDLC controller - taken from commproc.h - */ -typedef struct scc_hdlc { - sccp_t sh_genscc; - /* - * HDLC specific parameter RAM - */ - uchar res[4]; /* reserved */ - ulong sh_cmask; /* CRC constant */ - ulong sh_cpres; /* CRC preset */ - ushort sh_disfc; /* discarded frame counter */ - ushort sh_crcec; /* CRC error counter */ - ushort sh_abtsc; /* abort sequence counter */ - ushort sh_nmarc; /* nonmatching address rx cnt */ - ushort sh_retrc; /* frame retransmission cnt */ - ushort sh_mflr; /* maximum frame length reg */ - ushort sh_maxcnt; /* maximum length counter */ - ushort sh_rfthr; /* received frames threshold */ - ushort sh_rfcnt; /* received frames count */ - ushort sh_hmask; /* user defined frm addr mask */ - ushort sh_haddr1; /* user defined frm address 1 */ - ushort sh_haddr2; /* user defined frm address 2 */ - ushort sh_haddr3; /* user defined frm address 3 */ - ushort sh_haddr4; /* user defined frm address 4 */ - ushort tmp; /* temp */ - ushort tmp_mb; /* temp */ -} scc_hdlc_t; - -/* How about some FCCs..... -*/ -#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) -#define FCC_GFMR_DIAG_LE ((uint)0x40000000) -#define FCC_GFMR_DIAG_AE ((uint)0x80000000) -#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) -#define FCC_GFMR_TCI ((uint)0x20000000) -#define FCC_GFMR_TRX ((uint)0x10000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_CDP ((uint)0x04000000) -#define FCC_GFMR_CTSP ((uint)0x02000000) -#define FCC_GFMR_CDS ((uint)0x01000000) -#define FCC_GFMR_CTSS ((uint)0x00800000) -#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) -#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) -#define FCC_GFMR_SYNL_8 ((uint)0x00008000) -#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) -#define FCC_GFMR_RTSM ((uint)0x00002000) -#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) -#define FCC_GFMR_REVD ((uint)0x00000400) -#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) -#define FCC_GFMR_TCRC_16 ((uint)0x00000000) -#define FCC_GFMR_TCRC_32 ((uint)0x00000080) -#define FCC_GFMR_ENR ((uint)0x00000020) -#define FCC_GFMR_ENT ((uint)0x00000010) -#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) -#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) -#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) - -/* Generic FCC parameter ram. -*/ -typedef struct fcc_param { - ushort fcc_riptr; /* Rx Internal temp pointer */ - ushort fcc_tiptr; /* Tx Internal temp pointer */ - ushort fcc_res1; - ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ - uint fcc_rstate; /* Upper byte is Func code, must be set */ - uint fcc_rbase; /* Receive BD base */ - ushort fcc_rbdstat; /* RxBD status */ - ushort fcc_rbdlen; /* RxBD down counter */ - uint fcc_rdptr; /* RxBD internal data pointer */ - uint fcc_tstate; /* Upper byte is Func code, must be set */ - uint fcc_tbase; /* Transmit BD base */ - ushort fcc_tbdstat; /* TxBD status */ - ushort fcc_tbdlen; /* TxBD down counter */ - uint fcc_tdptr; /* TxBD internal data pointer */ - uint fcc_rbptr; /* Rx BD Internal buf pointer */ - uint fcc_tbptr; /* Tx BD Internal buf pointer */ - uint fcc_rcrc; /* Rx temp CRC */ - uint fcc_res2; - uint fcc_tcrc; /* Tx temp CRC */ -} fccp_t; - - -/* Ethernet controller through FCC. -*/ -typedef struct fcc_enet { - fccp_t fen_genfcc; - uint fen_statbuf; /* Internal status buffer */ - uint fen_camptr; /* CAM address */ - uint fen_cmask; /* Constant mask for CRC */ - uint fen_cpres; /* Preset CRC */ - uint fen_crcec; /* CRC Error counter */ - uint fen_alec; /* alignment error counter */ - uint fen_disfc; /* discard frame counter */ - ushort fen_retlim; /* Retry limit */ - ushort fen_retcnt; /* Retry counter */ - ushort fen_pper; /* Persistence */ - ushort fen_boffcnt; /* backoff counter */ - uint fen_gaddrh; /* Group address filter, high 32-bits */ - uint fen_gaddrl; /* Group address filter, low 32-bits */ - ushort fen_tfcstat; /* out of sequence TxBD */ - ushort fen_tfclen; - uint fen_tfcptr; - ushort fen_mflr; /* Maximum frame length (1518) */ - ushort fen_paddrh; /* MAC address */ - ushort fen_paddrm; - ushort fen_paddrl; - ushort fen_ibdcount; /* Internal BD counter */ - ushort fen_idbstart; /* Internal BD start pointer */ - ushort fen_ibdend; /* Internal BD end pointer */ - ushort fen_txlen; /* Internal Tx frame length counter */ - uint fen_ibdbase[8]; /* Internal use */ - uint fen_iaddrh; /* Individual address filter */ - uint fen_iaddrl; - ushort fen_minflr; /* Minimum frame length (64) */ - ushort fen_taddrh; /* Filter transfer MAC address */ - ushort fen_taddrm; - ushort fen_taddrl; - ushort fen_padptr; /* Pointer to pad byte buffer */ - ushort fen_cftype; /* control frame type */ - ushort fen_cfrange; /* control frame range */ - ushort fen_maxb; /* maximum BD count */ - ushort fen_maxd1; /* Max DMA1 length (1520) */ - ushort fen_maxd2; /* Max DMA2 length (1520) */ - ushort fen_maxd; /* internal max DMA count */ - ushort fen_dmacnt; /* internal DMA counter */ - uint fen_octc; /* Total octect counter */ - uint fen_colc; /* Total collision counter */ - uint fen_broc; /* Total broadcast packet counter */ - uint fen_mulc; /* Total multicast packet count */ - uint fen_uspc; /* Total packets < 64 bytes */ - uint fen_frgc; /* Total packets < 64 bytes with errors */ - uint fen_ospc; /* Total packets > 1518 */ - uint fen_jbrc; /* Total packets > 1518 with errors */ - uint fen_p64c; /* Total packets == 64 bytes */ - uint fen_p65c; /* Total packets 64 < bytes <= 127 */ - uint fen_p128c; /* Total packets 127 < bytes <= 255 */ - uint fen_p256c; /* Total packets 256 < bytes <= 511 */ - uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ - uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ - uint fen_cambuf; /* Internal CAM buffer poiner */ - ushort fen_rfthr; /* Received frames threshold */ - ushort fen_rfcnt; /* Received frames count */ -} fcc_enet_t; - -/* FCC Event/Mask register as used by Ethernet. -*/ -#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ -#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ -#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ -#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* FCC Mode Register (FPSMR) as used by Ethernet. -*/ -#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ -#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ -#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ -#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ -#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ -#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ -#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ -#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ -#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ -#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ -#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ -#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ -#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ -#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ - -/* IIC parameter RAM. -*/ -typedef struct iic { - ushort iic_rbase; /* Rx Buffer descriptor base address */ - ushort iic_tbase; /* Tx Buffer descriptor base address */ - u_char iic_rfcr; /* Rx function code */ - u_char iic_tfcr; /* Tx function code */ - ushort iic_mrblr; /* Max receive buffer length */ - uint iic_rstate; /* Internal */ - uint iic_rdp; /* Internal */ - ushort iic_rbptr; /* Internal */ - ushort iic_rbc; /* Internal */ - uint iic_rxtmp; /* Internal */ - uint iic_tstate; /* Internal */ - uint iic_tdp; /* Internal */ - ushort iic_tbptr; /* Internal */ - ushort iic_tbc; /* Internal */ - uint iic_txtmp; /* Internal */ -} iic_t; - -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; /* Tx temp. */ - uint spi_res1[4]; /* SDMA temp. */ -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) -#define SPMODE_PM(x) ((x) &0xF) - -/* SPI Event/Mask register. -*/ -#define SPI_EMASK 0x37 /* Event Mask */ -#define SPI_MME 0x20 /* Multi-Master Error */ -#define SPI_TXE 0x10 /* Transmit Error */ -#define SPI_BSY 0x04 /* Busy */ -#define SPI_TXB 0x02 /* Tx Buffer Empty */ -#define SPI_RXB 0x01 /* RX Buffer full/closed */ - -#define SPI_STR 0x80 /* SPCOM: Start transmit */ - -#define SPI_EB ((u_char)0x10) /* big endian byte order */ - -#define BD_IIC_START ((ushort)0x0400) - -#endif /* __CPM_82XX__ */ diff --git a/arch/powerpc/include/asm/immap_8260.h b/arch/powerpc/include/asm/immap_8260.h deleted file mode 100644 index c7021a7..0000000 --- a/arch/powerpc/include/asm/immap_8260.h +++ /dev/null @@ -1,604 +0,0 @@ -/* - * MPC8260 Internal Memory Map - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * - * The Internal Memory Map of the 8260. I don't know how generic - * this will be, as I don't have any knowledge of the subsequent - * parts at this time. I copied this from the 8xx_immap.h. - */ -#ifndef __IMMAP_82XX__ -#define __IMMAP_82XX__ - -/* System configuration registers. -*/ -typedef struct sys_conf { - uint sc_siumcr; - uint sc_sypcr; - char res1[6]; - ushort sc_swsr; - char res2[20]; - uint sc_bcr; - u_char sc_ppc_acr; - char res3[3]; - uint sc_ppc_alrh; - uint sc_ppc_alrl; - u_char sc_lcl_acr; - char res4[3]; - uint sc_lcl_alrh; - uint sc_lcl_alrl; - uint sc_tescr1; - uint sc_tescr2; - uint sc_ltescr1; - uint sc_ltescr2; - uint sc_pdtea; - u_char sc_pdtem; - char res5[3]; - uint sc_ldtea; - u_char sc_ldtem; - char res6[163]; -} sysconf8260_t; - - -/* Memory controller registers. -*/ -typedef struct mem_ctlr { - uint memc_br0; - uint memc_or0; - uint memc_br1; - uint memc_or1; - uint memc_br2; - uint memc_or2; - uint memc_br3; - uint memc_or3; - uint memc_br4; - uint memc_or4; - uint memc_br5; - uint memc_or5; - uint memc_br6; - uint memc_or6; - uint memc_br7; - uint memc_or7; - uint memc_br8; - uint memc_or8; - uint memc_br9; - uint memc_or9; - uint memc_br10; - uint memc_or10; - uint memc_br11; - uint memc_or11; - char res1[8]; - uint memc_mar; - char res2[4]; - uint memc_mamr; - uint memc_mbmr; - uint memc_mcmr; - char res3[8]; - ushort memc_mptpr; - char res4[2]; - uint memc_mdr; - char res5[4]; - uint memc_psdmr; - uint memc_lsdmr; - u_char memc_purt; - char res6[3]; - u_char memc_psrt; - char res7[3]; - u_char memc_lurt; - char res8[3]; - u_char memc_lsrt; - char res9[3]; - uint memc_immr; - uint memc_pcibr0; - uint memc_pcibr1; - char res10[16]; - uint memc_pcimsk0; - uint memc_pcimsk1; - char res11[52]; -} memctl8260_t; - -/* System Integration Timers. -*/ -typedef struct sys_int_timers { - char res1[32]; - ushort sit_tmcntsc; - char res2[2]; - uint sit_tmcnt; - char res3[4]; - uint sit_tmcntal; - char res4[16]; - ushort sit_piscr; - char res5[2]; - uint sit_pitc; - uint sit_pitr; - char res6[94]; - char res7[390]; -} sit8260_t; - -/* PCI - */ -typedef struct pci_config { - uint pci_omisr; - uint pci_ominr; - char res1[8]; - uint pci_ifqpr; - uint pci_ofqpr; - char res2[8]; - uint pci_imr0; - uint pci_imr1; - uint pci_omr0; - uint pci_omr1; - uint pci_odr; - char res3[4]; - uint pci_idr; - char res4[20]; - uint pci_imisr; - uint pci_imimr; - char res5[24]; - uint pci_ifhpr; - char res5_2[4]; - uint pci_iftpr; - char res6[4]; - uint pci_iphpr; - char res6_2[4]; - uint pci_iptpr; - char res7[4]; - uint pci_ofhpr; - char res7_2[4]; - uint pci_oftpr; - char res8[4]; - uint pci_ophpr; - char res8_2[4]; - uint pci_optpr; - char res9[8]; - uint pci_mucr; - char res10[8]; - uint pci_qbar; - char res11[12]; - uint pci_dmamr0; - uint pci_dmasr0; - uint pci_dmacdar0; - char res12[4]; - uint pci_dmasar0; - char res13[4]; - uint pci_dmadar0; - char res14[4]; - uint pci_dmabcr0; - uint pci_dmandar0; - char res15[88]; - uint pci_dmamr1; - uint pci_dmasr1; - uint pci_dmacdar1; - char res16[4]; - uint pci_dmasar1; - char res17[4]; - uint pci_dmadar1; - char res18[4]; - uint pci_dmabcr1; - uint pci_dmandar1; - char res19[88]; - uint pci_dmamr2; - uint pci_dmasr2; - uint pci_dmacdar2; - char res20[4]; - uint pci_dmasar2; - char res21[4]; - uint pci_dmadar2; - char res22[4]; - uint pci_dmabcr2; - uint pci_dmandar2; - char res23[88]; - uint pci_dmamr3; - uint pci_dmasr3; - uint pci_dmacdar3; - char res24[4]; - uint pci_dmasar3; - char res25[4]; - uint pci_dmadar3; - char res26[4]; - uint pci_dmabcr3; - uint pci_dmandar3; - char res27[344]; - uint pci_potar0; - char res28[4]; - uint pci_pobar0; - char res29[4]; - uint pci_pocmr0; - char res30[4]; - uint pci_potar1; - char res31[4]; - uint pci_pobar1; - char res32[4]; - uint pci_pocmr1; - char res33[4]; - uint pci_potar2; - char res34[4]; - uint pci_pobar2; - char res35[4]; - uint pci_pocmr2; - char res36[52]; - uint pci_ptcr; - uint pci_gpcr; - uint pci_gcr; - uint pci_esr; - uint pci_emr; - uint pci_ecr; - uint pci_eacr; - char res37[4]; - uint pci_edcr; - char res38[4]; - uint pci_eccr; - char res39[44]; - uint pci_pitar1; - char res40[4]; - uint pci_pibar1; - char res41[4]; - uint pci_picmr1; - char res42[4]; - uint pci_pitar0; - char res43[4]; - uint pci_pibar0; - char res44[4]; - uint pci_picmr0; - char res45[4]; - uint pci_cfg_addr; - uint pci_cfg_data; - uint pci_int_ack; - char res46[756]; -}pci8260_t; -#define PISCR_PIRQ_MASK ((ushort)0xff00) -#define PISCR_PS ((ushort)0x0080) -#define PISCR_PIE ((ushort)0x0004) -#define PISCR_PTF ((ushort)0x0002) -#define PISCR_PTE ((ushort)0x0001) - -/* Interrupt Controller. -*/ -typedef struct interrupt_controller { - ushort ic_sicr; - char res1[2]; - uint ic_sivec; - uint ic_sipnrh; - uint ic_sipnrl; - uint ic_siprr; - uint ic_scprrh; - uint ic_scprrl; - uint ic_simrh; - uint ic_simrl; - uint ic_siexr; - char res2[88]; -} intctl8260_t; - -/* Clocks and Reset. -*/ -typedef struct clk_and_reset { - uint car_sccr; - char res1[4]; - uint car_scmr; - char res2[4]; - uint car_rsr; - uint car_rmr; - char res[104]; -} car8260_t; - -/* Input/Output Port control/status registers. - * Names consistent with processor manual, although they are different - * from the original 8xx names....... - */ -typedef struct io_port { - uint iop_pdira; - uint iop_ppara; - uint iop_psora; - uint iop_podra; - uint iop_pdata; - char res1[12]; - uint iop_pdirb; - uint iop_pparb; - uint iop_psorb; - uint iop_podrb; - uint iop_pdatb; - char res2[12]; - uint iop_pdirc; - uint iop_pparc; - uint iop_psorc; - uint iop_podrc; - uint iop_pdatc; - char res3[12]; - uint iop_pdird; - uint iop_ppard; - uint iop_psord; - uint iop_podrd; - uint iop_pdatd; - char res4[12]; -} iop8260_t; - -/* Communication Processor Module Timers -*/ -typedef struct cpm_timers { - u_char cpmt_tgcr1; - char res1[3]; - u_char cpmt_tgcr2; - char res2[11]; - ushort cpmt_tmr1; - ushort cpmt_tmr2; - ushort cpmt_trr1; - ushort cpmt_trr2; - ushort cpmt_tcr1; - ushort cpmt_tcr2; - ushort cpmt_tcn1; - ushort cpmt_tcn2; - ushort cpmt_tmr3; - ushort cpmt_tmr4; - ushort cpmt_trr3; - ushort cpmt_trr4; - ushort cpmt_tcr3; - ushort cpmt_tcr4; - ushort cpmt_tcn3; - ushort cpmt_tcn4; - ushort cpmt_ter1; - ushort cpmt_ter2; - ushort cpmt_ter3; - ushort cpmt_ter4; - char res3[584]; -} cpmtimer8260_t; - -/* DMA control/status registers. -*/ -typedef struct sdma_csr { - char res0[24]; - u_char sdma_sdsr; - char res1[3]; - u_char sdma_sdmr; - char res2[3]; - u_char sdma_idsr1; - char res3[3]; - u_char sdma_idmr1; - char res4[3]; - u_char sdma_idsr2; - char res5[3]; - u_char sdma_idmr2; - char res6[3]; - u_char sdma_idsr3; - char res7[3]; - u_char sdma_idmr3; - char res8[3]; - u_char sdma_idsr4; - char res9[3]; - u_char sdma_idmr4; - char res10[707]; -} sdma8260_t; - -/* Fast controllers -*/ -typedef struct fcc { - uint fcc_gfmr; - uint fcc_fpsmr; - ushort fcc_ftodr; - char res1[2]; - ushort fcc_fdsr; - char res2[2]; - ushort fcc_fcce; - char res3[2]; - ushort fcc_fccm; - char res4[2]; - u_char fcc_fccs; - char res5[3]; - u_char fcc_ftirr_phy[4]; -} fcc_t; - -/* Fast controllers continued - */ -typedef struct fcc_c { - uint fcc_firper; - uint fcc_firer; - uint fcc_firsr_hi; - uint fcc_firsr_lo; - u_char fcc_gfemr; - char res1[15]; -} fcc_c_t; - -/* TC Layer - */ -typedef struct tclayer { - ushort tc_tcmode; - ushort tc_cdsmr; - ushort tc_tcer; - ushort tc_rcc; - ushort tc_tcmr; - ushort tc_fcc; - ushort tc_ccc; - ushort tc_icc; - ushort tc_tcc; - ushort tc_ecc; - char res1[12]; -} tclayer_t; - -/* I2C -*/ -typedef struct i2c { - u_char i2c_i2mod; - char res1[3]; - u_char i2c_i2add; - char res2[3]; - u_char i2c_i2brg; - char res3[3]; - u_char i2c_i2com; - char res4[3]; - u_char i2c_i2cer; - char res5[3]; - u_char i2c_i2cmr; - char res6[331]; -} i2c8260_t; - -typedef struct scc { /* Serial communication channels */ - uint scc_gsmrl; - uint scc_gsmrh; - ushort scc_psmr; - char res1[2]; - ushort scc_todr; - ushort scc_dsr; - ushort scc_scce; - char res2[2]; - ushort scc_sccm; - char res3; - u_char scc_sccs; - char res4[8]; -} scc_t; - -typedef struct smc { /* Serial management channels */ - char res1[2]; - ushort smc_smcmr; - char res2[2]; - u_char smc_smce; - char res3[3]; - u_char smc_smcm; - char res4[5]; -} smc_t; - -/* Serial Peripheral Interface. -*/ -typedef struct im_spi { - ushort spi_spmode; - char res1[4]; - u_char spi_spie; - char res2[3]; - u_char spi_spim; - char res3[2]; - u_char spi_spcom; - char res4[82]; -} im_spi_t; - -/* CPM Mux. -*/ -typedef struct cpmux { - u_char cmx_si1cr; - char res1; - u_char cmx_si2cr; - char res2; - uint cmx_fcr; - uint cmx_scr; - u_char cmx_smr; - char res3; - ushort cmx_uar; - char res4[16]; -} cpmux_t; - -/* SIRAM control -*/ -typedef struct siram { - ushort si_amr; - ushort si_bmr; - ushort si_cmr; - ushort si_dmr; - u_char si_gmr; - char res1; - u_char si_cmdr; - char res2; - u_char si_str; - char res3; - ushort si_rsr; -} siramctl_t; - -typedef struct mcc { - ushort mcc_mcce; - char res1[2]; - ushort mcc_mccm; - char res2[2]; - u_char mcc_mccf; - char res3[7]; -} mcc_t; - -typedef struct comm_proc { - uint cp_cpcr; - uint cp_rccr; - char res1[14]; - ushort cp_rter; - char res2[2]; - ushort cp_rtmr; - ushort cp_rtscr; - char res3[2]; - uint cp_rtsr; - char res4[12]; -} cpm8260_t; - -/* ...and the whole thing wrapped up.... -*/ -typedef struct immap { - /* Some references are into the unique and known dpram spaces, - * others are from the generic base. - */ - union { - struct { - u_char im_dpram1[16 * 1024]; - char res1[16 * 1024]; - u_char im_dpram2[4 * 1024]; - char res2[8 * 1024]; - u_char im_dpram3[4 * 1024]; - char res3[16 * 1024]; - }; - u8 im_dprambase[64 * 1024]; - u16 im_dprambase16[32 * 1024]; - }; - - sysconf8260_t im_siu_conf; /* SIU Configuration */ - memctl8260_t im_memctl; /* Memory Controller */ - sit8260_t im_sit; /* System Integration Timers */ - pci8260_t im_pci; /* PCI Configuration */ - intctl8260_t im_intctl; /* Interrupt Controller */ - car8260_t im_clkrst; /* Clocks and reset */ - iop8260_t im_ioport; /* IO Port control/status */ - cpmtimer8260_t im_cpmtimer; /* CPM timers */ - sdma8260_t im_sdma; /* SDMA control/status */ - - fcc_t im_fcc[3]; /* Three FCCs */ - - char res4[32]; - fcc_c_t im_fcc_c[3]; /* Continued FCCs */ - char res4a[32]; - - tclayer_t im_tclayer[8]; /* Eight TCLayers */ - ushort tc_tcgsr; - ushort tc_tcger; - - /* First set of baud rate generators. - */ - char res4b[236]; - uint im_brgc5; - uint im_brgc6; - uint im_brgc7; - uint im_brgc8; - - char res5[608]; - - i2c8260_t im_i2c; /* I2C control/status */ - cpm8260_t im_cpm; /* Communication processor */ - - /* Second set of baud rate generators. - */ - uint im_brgc1; - uint im_brgc2; - uint im_brgc3; - uint im_brgc4; - - scc_t im_scc[4]; /* Four SCCs */ - smc_t im_smc[2]; /* Couple of SMCs */ - im_spi_t im_spi; /* A SPI */ - cpmux_t im_cpmux; /* CPM clock route mux */ - siramctl_t im_siramctl1; /* First SI RAM Control */ - mcc_t im_mcc1; /* First MCC */ - siramctl_t im_siramctl2; /* Second SI RAM Control */ - mcc_t im_mcc2; /* Second MCC */ - - char res6[1184]; - - ushort im_si1txram[256]; - char res7[512]; - ushort im_si1rxram[256]; - char res8[512]; - ushort im_si2txram[256]; - char res9[512]; - ushort im_si2rxram[256]; - char res10[512]; - char res11[4096]; -} immap_t; - -#endif /* __IMMAP_82XX__ */ diff --git a/arch/powerpc/include/asm/iopin_8260.h b/arch/powerpc/include/asm/iopin_8260.h deleted file mode 100644 index 617584d..0000000 --- a/arch/powerpc/include/asm/iopin_8260.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * MPC8260 I/O port pin manipulation functions - */ - -#ifndef _ASM_IOPIN_8260_H_ -#define _ASM_IOPIN_8260_H_ - -#include <linux/types.h> -#include <asm/immap_8260.h> - -#ifdef __KERNEL__ - -typedef - struct { - u_char port:2; /* port number (A=0, B=1, C=2, D=3) */ - u_char pin:5; /* port pin (0-31) */ - u_char flag:1; /* for whatever */ - } -iopin_t; - -#define IOPIN_PORTA 0 -#define IOPIN_PORTB 1 -#define IOPIN_PORTC 2 -#define IOPIN_PORTD 3 - -static __inline__ void -iopin_set_high(iopin_t *iopin) -{ - volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata; - datp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -static __inline__ void -iopin_set_low(iopin_t *iopin) -{ - volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata; - datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -static __inline__ uint -iopin_is_high(iopin_t *iopin) -{ - volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata; - return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -static __inline__ uint -iopin_is_low(iopin_t *iopin) -{ - volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata; - return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -static __inline__ void -iopin_set_out(iopin_t *iopin) -{ - volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira; - dirp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -static __inline__ void -iopin_set_in(iopin_t *iopin) -{ - volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira; - dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -static __inline__ uint -iopin_is_out(iopin_t *iopin) -{ - volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira; - return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -static __inline__ uint -iopin_is_in(iopin_t *iopin) -{ - volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira; - return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -static __inline__ void -iopin_set_odr(iopin_t *iopin) -{ - volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra; - odrp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -static __inline__ void -iopin_set_act(iopin_t *iopin) -{ - volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra; - odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -static __inline__ uint -iopin_is_odr(iopin_t *iopin) -{ - volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra; - return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -static __inline__ uint -iopin_is_act(iopin_t *iopin) -{ - volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra; - return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -static __inline__ void -iopin_set_ded(iopin_t *iopin) -{ - volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara; - parp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -static __inline__ void -iopin_set_gen(iopin_t *iopin) -{ - volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara; - parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -static __inline__ uint -iopin_is_ded(iopin_t *iopin) -{ - volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara; - return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -static __inline__ uint -iopin_is_gen(iopin_t *iopin) -{ - volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara; - return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -static __inline__ void -iopin_set_opt2(iopin_t *iopin) -{ - volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora; - sorp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -static __inline__ void -iopin_set_opt1(iopin_t *iopin) -{ - volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora; - sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -static __inline__ uint -iopin_is_opt2(iopin_t *iopin) -{ - volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora; - return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -static __inline__ uint -iopin_is_opt1(iopin_t *iopin) -{ - volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora; - return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IOPIN_8260_H_ */ diff --git a/arch/powerpc/include/asm/m8260_pci.h b/arch/powerpc/include/asm/m8260_pci.h deleted file mode 100644 index 6daca4f..0000000 --- a/arch/powerpc/include/asm/m8260_pci.h +++ /dev/null @@ -1,165 +0,0 @@ -#ifndef _PPC_KERNEL_M8260_PCI_H -#define _PPC_KERNEL_M8260_PCI_H - -#define M8265_PCIBR0 0x101ac -#define M8265_PCIBR1 0x101b0 -#define M8265_PCIMSK0 0x101c4 -#define M8265_PCIMSK1 0x101c8 - -/* Bit definitions for PCIBR registers */ - -#define PCIBR_ENABLE 0x00000001 - -/* Bit definitions for PCIMSK registers */ - -#define PCIMSK_32KB 0xFFFF8000 /* Size of window, smallest */ -#define PCIMSK_64KB 0xFFFF0000 -#define PCIMSK_128KB 0xFFFE0000 -#define PCIMSK_256KB 0xFFFC0000 -#define PCIMSK_512KB 0xFFF80000 -#define PCIMSK_1MB 0xFFF00000 -#define PCIMSK_2MB 0xFFE00000 -#define PCIMSK_4MB 0xFFC00000 -#define PCIMSK_8MB 0xFF800000 -#define PCIMSK_16MB 0xFF000000 -#define PCIMSK_32MB 0xFE000000 -#define PCIMSK_64MB 0xFC000000 -#define PCIMSK_128MB 0xF8000000 -#define PCIMSK_256MB 0xF0000000 -#define PCIMSK_512MB 0xE0000000 -#define PCIMSK_1GB 0xC0000000 /* Size of window, largest */ - - -#define M826X_SCCR_PCI_MODE_EN 0x100 - - -/* - * Outbound ATU registers (3 sets). These registers control how 60x bus (local) - * addresses are translated to PCI addresses when the MPC826x is a PCI bus - * master (initiator). - */ - -#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */ -#define POTAR_REG1 0x10818 -#define POTAR_REG2 0x10830 - -#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */ -#define POBAR_REG1 0x10820 -#define POBAR_REG2 0x10838 - -#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */ -#define POCMR_REG1 0x10828 -#define POCMR_REG2 0x10840 - -/* Bit definitions for POMCR registers */ - -#define POCMR_MASK_4KB 0x000FFFFF -#define POCMR_MASK_8KB 0x000FFFFE -#define POCMR_MASK_16KB 0x000FFFFC -#define POCMR_MASK_32KB 0x000FFFF8 -#define POCMR_MASK_64KB 0x000FFFF0 -#define POCMR_MASK_128KB 0x000FFFE0 -#define POCMR_MASK_256KB 0x000FFFC0 -#define POCMR_MASK_512KB 0x000FFF80 -#define POCMR_MASK_1MB 0x000FFF00 -#define POCMR_MASK_2MB 0x000FFE00 -#define POCMR_MASK_4MB 0x000FFC00 -#define POCMR_MASK_8MB 0x000FF800 -#define POCMR_MASK_16MB 0x000FF000 -#define POCMR_MASK_32MB 0x000FE000 -#define POCMR_MASK_64MB 0x000FC000 -#define POCMR_MASK_128MB 0x000F8000 -#define POCMR_MASK_256MB 0x000F0000 -#define POCMR_MASK_512MB 0x000E0000 -#define POCMR_MASK_1GB 0x000C0000 - -#define POCMR_ENABLE 0x80000000 -#define POCMR_PCI_IO 0x40000000 -#define POCMR_PREFETCH_EN 0x20000000 - -/* Soft PCI reset */ - -#define PCI_GCR_REG 0x10880 - -/* Bit definitions for PCI_GCR registers */ - -#define PCIGCR_PCI_BUS_EN 0x1 - -/* - * Inbound ATU registers (2 sets). These registers control how PCI addresses - * are translated to 60x bus (local) addresses when the MPC826x is a PCI bus target. - */ - -#define PITAR_REG1 0x108D0 -#define PIBAR_REG1 0x108D8 -#define PICMR_REG1 0x108E0 -#define PITAR_REG0 0x108E8 -#define PIBAR_REG0 0x108F0 -#define PICMR_REG0 0x108F8 - -/* Bit definitions for PCI Inbound Comparison Mask registers */ - -#define PICMR_MASK_4KB 0x000FFFFF -#define PICMR_MASK_8KB 0x000FFFFE -#define PICMR_MASK_16KB 0x000FFFFC -#define PICMR_MASK_32KB 0x000FFFF8 -#define PICMR_MASK_64KB 0x000FFFF0 -#define PICMR_MASK_128KB 0x000FFFE0 -#define PICMR_MASK_256KB 0x000FFFC0 -#define PICMR_MASK_512KB 0x000FFF80 -#define PICMR_MASK_1MB 0x000FFF00 -#define PICMR_MASK_2MB 0x000FFE00 -#define PICMR_MASK_4MB 0x000FFC00 -#define PICMR_MASK_8MB 0x000FF800 -#define PICMR_MASK_16MB 0x000FF000 -#define PICMR_MASK_32MB 0x000FE000 -#define PICMR_MASK_64MB 0x000FC000 -#define PICMR_MASK_128MB 0x000F8000 -#define PICMR_MASK_256MB 0x000F0000 -#define PICMR_MASK_512MB 0x000E0000 -#define PICMR_MASK_1GB 0x000C0000 - -#define PICMR_ENABLE 0x80000000 -#define PICMR_NO_SNOOP_EN 0x40000000 -#define PICMR_PREFETCH_EN 0x20000000 - -/* PCI error Registers */ - -#define PCI_ERROR_STATUS_REG 0x10884 -#define PCI_ERROR_MASK_REG 0x10888 -#define PCI_ERROR_CONTROL_REG 0x1088C -#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890 -#define PCI_ERROR_DATA_CAPTURE_REG 0x10898 -#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0 - -/* PCI error Register bit defines */ - -#define PCI_ERROR_PCI_ADDR_PAR 0x00000001 -#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002 -#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004 -#define PCI_ERROR_PCI_NO_RSP 0x00000008 -#define PCI_ERROR_PCI_TAR_ABT 0x00000010 -#define PCI_ERROR_PCI_SERR 0x00000020 -#define PCI_ERROR_PCI_PERR_RD 0x00000040 -#define PCI_ERROR_PCI_PERR_WR 0x00000080 -#define PCI_ERROR_I2O_OFQO 0x00000100 -#define PCI_ERROR_I2O_IPQO 0x00000200 -#define PCI_ERROR_IRA 0x00000400 -#define PCI_ERROR_NMI 0x00000800 -#define PCI_ERROR_I2O_DBMC 0x00001000 - -/* - * Register pair used to generate configuration cycles on the PCI bus - * and access the MPC826x's own PCI configuration registers. - */ - -#define PCI_CFG_ADDR_REG 0x10900 -#define PCI_CFG_DATA_REG 0x10904 - -/* Bus parking decides where the bus control sits when idle */ -/* If modifying memory controllers for PCI park on the core */ - -#define PPC_ACR_BUS_PARK_CORE 0x6 -#define PPC_ACR_BUS_PARK_PCI 0x3 - -#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/powerpc/include/asm/ppc.h b/arch/powerpc/include/asm/ppc.h index 8abe727..f23ed3e 100644 --- a/arch/powerpc/include/asm/ppc.h +++ b/arch/powerpc/include/asm/ppc.h @@ -19,11 +19,6 @@ #include <mpc5xxx.h> #elif defined(CONFIG_MPC512X) #include <asm/immap_512x.h> -#elif defined(CONFIG_MPC8260) -#if defined(CONFIG_MPC8247) || defined(CONFIG_MPC8272) -#define CONFIG_MPC8272_FAMILY 1 -#endif -#include <asm/immap_8260.h> #endif #ifdef CONFIG_MPC86xx #include <mpc86xx.h> diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index aaabae0..6549a09 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1364,9 +1364,6 @@ int prt_8260_clks(void); #if defined(CONFIG_WALNUT) #define _machine _MACH_walnut #define have_of 0 -#elif defined(CONFIG_MPC8260) -#define _machine _MACH_8260 -#define have_of 0 #else #error "Machine not defined correctly" #endif diff --git a/arch/powerpc/include/asm/status_led.h b/arch/powerpc/include/asm/status_led.h index c151b54..2767c05 100644 --- a/arch/powerpc/include/asm/status_led.h +++ b/arch/powerpc/include/asm/status_led.h @@ -9,9 +9,7 @@
/* if not overridden */ #ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC -# if defined(CONFIG_MPC8260) -# include <mpc8260.h> -# elif defined(CONFIG_5xx) +# if defined(CONFIG_5xx) # include <mpc5xx.h> # else # error CPU specific Status LED header file missing. diff --git a/arch/powerpc/lib/Kconfig b/arch/powerpc/lib/Kconfig deleted file mode 100644 index 987cec9..0000000 --- a/arch/powerpc/lib/Kconfig +++ /dev/null @@ -1,8 +0,0 @@ -config CMD_IMMAP - bool "Enable various commands to dump IMMR information" - help - This enables various commands such as: - - siuinfo - print System Interface Unit (SIU) registers - memcinfo - print Memory Controller registers - sitinfo - print System Integration Timers (SIT) registers diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 5e55385..4dd6b56 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_BAT_RW) += bat_rw.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-y += cache.o obj-y += extable.o -obj-$(CONFIG_CMD_IMMAP) += immap.o obj-y += interrupts.o obj-$(CONFIG_CMD_KGDB) += kgdb.o obj-y += stack.o diff --git a/arch/powerpc/lib/immap.c b/arch/powerpc/lib/immap.c deleted file mode 100644 index 85527a1..0000000 --- a/arch/powerpc/lib/immap.c +++ /dev/null @@ -1,629 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * MPC8xx/MPC8260 Internal Memory Map Functions - */ - -#include <common.h> -#include <command.h> - -#if defined(CONFIG_MPC8260) - -#include <asm/immap_8260.h> -#include <asm/cpm_8260.h> -#include <asm/iopin_8260.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void -unimplemented ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - printf ("Sorry, but the '%s' command has not been implemented\n", - cmdtp->name); -} - -int -do_siuinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - -#if defined(CONFIG_MPC8260) - volatile sysconf8260_t *sc = &immap->im_siu_conf; -#endif - - printf ("SIUMCR= %08x SYPCR = %08x\n", sc->sc_siumcr, sc->sc_sypcr); -#if defined(CONFIG_MPC8260) - printf ("BCR = %08x\n", sc->sc_bcr); - printf ("P_ACR = %02x P_ALRH= %08x P_ALRL= %08x\n", - sc->sc_ppc_acr, sc->sc_ppc_alrh, sc->sc_ppc_alrl); - printf ("L_ACR = %02x L_ALRH= %08x L_ALRL= %08x\n", - sc->sc_lcl_acr, sc->sc_lcl_alrh, sc->sc_lcl_alrl); - printf ("PTESR1= %08x PTESR2= %08x\n", sc->sc_tescr1, sc->sc_tescr2); - printf ("LTESR1= %08x LTESR2= %08x\n", sc->sc_ltescr1, sc->sc_ltescr2); - printf ("PDTEA = %08x PDTEM = %02x\n", sc->sc_pdtea, sc->sc_pdtem); - printf ("LDTEA = %08x LDTEM = %02x\n", sc->sc_ldtea, sc->sc_ldtem); -#endif - return 0; -} - -int -do_memcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - -#if defined(CONFIG_MPC8260) - volatile memctl8260_t *memctl = &immap->im_memctl; - int nbanks = 12; -#endif - volatile uint *p = &memctl->memc_br0; - int i; - - for (i = 0; i < nbanks; i++, p += 2) { - if (i < 10) { - printf ("BR%d = %08x OR%d = %08x\n", - i, p[0], i, p[1]); - } else { - printf ("BR%d = %08x OR%d = %08x\n", - i, p[0], i, p[1]); - } - } - - printf ("MAR = %08x", memctl->memc_mar); -#if defined(CONFIG_MPC8260) - putc ('\n'); -#endif - printf ("MAMR = %08x MBMR = %08x", - memctl->memc_mamr, memctl->memc_mbmr); -#if defined(CONFIG_MPC8260) - printf (" MCMR = %08x\n", memctl->memc_mcmr); -#endif - printf ("MPTPR = %04x MDR = %08x\n", - memctl->memc_mptpr, memctl->memc_mdr); -#if defined(CONFIG_MPC8260) - printf ("PSDMR = %08x LSDMR = %08x\n", - memctl->memc_psdmr, memctl->memc_lsdmr); - printf ("PURT = %02x PSRT = %02x\n", - memctl->memc_purt, memctl->memc_psrt); - printf ("LURT = %02x LSRT = %02x\n", - memctl->memc_lurt, memctl->memc_lsrt); - printf ("IMMR = %08x\n", memctl->memc_immr); -#endif - return 0; -} - -int -do_sitinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} - -#ifdef CONFIG_MPC8260 -int -do_icinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} -#endif - -int -do_carinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - -#if defined(CONFIG_MPC8260) - volatile car8260_t *car = &immap->im_clkrst; -#endif - -#if defined(CONFIG_MPC8260) - printf ("SCCR = %08x\n", car->car_sccr); - printf ("SCMR = %08x\n", car->car_scmr); - printf ("RSR = %08x\n", car->car_rsr); - printf ("RMR = %08x\n", car->car_rmr); -#endif - return 0; -} - -static int counter; - -static void -header(void) -{ - char *data = "\ - -------------------------------- --------------------------------\ - 00000000001111111111222222222233 00000000001111111111222222222233\ - 01234567890123456789012345678901 01234567890123456789012345678901\ - -------------------------------- --------------------------------\ - "; - int i; - - if (counter % 2) - putc('\n'); - counter = 0; - - for (i = 0; i < 4; i++, data += 79) - printf("%.79s\n", data); -} - -static void binary (char *label, uint value, int nbits) -{ - uint mask = 1 << (nbits - 1); - int i, second = (counter++ % 2); - - if (second) - putc (' '); - puts (label); - for (i = 32 + 1; i != nbits; i--) - putc (' '); - - while (mask != 0) { - if (value & mask) - putc ('1'); - else - putc ('0'); - mask >>= 1; - } - - if (second) - putc ('\n'); -} - -#if defined(CONFIG_MPC8260) -#define PA_NBITS 32 -#define PA_NB_ODR 32 -#define PB_NBITS 28 -#define PB_NB_ODR 28 -#define PC_NBITS 32 -#define PD_NBITS 28 -#endif - -int -do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - -#if defined(CONFIG_MPC8260) - volatile iop8260_t *iop = &immap->im_ioport; - volatile uint *l, *r; -#endif - volatile uint *R; - - counter = 0; - header (); - - /* - * Ports A & B - */ - -#if defined(CONFIG_MPC8260) - l = &iop->iop_pdira; - R = &iop->iop_pdirb; -#endif - binary ("PA_DIR", *l++, PA_NBITS); - binary ("PB_DIR", *R++, PB_NBITS); - binary ("PA_PAR", *l++, PA_NBITS); - binary ("PB_PAR", *R++, PB_NBITS); -#if defined(CONFIG_MPC8260) - binary ("PA_SOR", *l++, PA_NBITS); - binary ("PB_SOR", *R++, PB_NBITS); -#endif - binary ("PA_ODR", *l++, PA_NB_ODR); - binary ("PB_ODR", *R++, PB_NB_ODR); - binary ("PA_DAT", *l++, PA_NBITS); - binary ("PB_DAT", *R++, PB_NBITS); - - header (); - - /* - * Ports C & D - */ - -#if defined(CONFIG_MPC8260) - l = &iop->iop_pdirc; - r = &iop->iop_pdird; -#endif - binary ("PC_DIR", *l++, PC_NBITS); - binary ("PD_DIR", *r++, PD_NBITS); - binary ("PC_PAR", *l++, PC_NBITS); - binary ("PD_PAR", *r++, PD_NBITS); -#if defined(CONFIG_MPC8260) - binary ("PC_SOR", *l++, PC_NBITS); - binary ("PD_SOR", *r++, PD_NBITS); - binary ("PC_ODR", *l++, PC_NBITS); - binary ("PD_ODR", *r++, PD_NBITS); -#endif - binary ("PC_DAT", *l++, PC_NBITS); - binary ("PD_DAT", *r++, PD_NBITS); - - header (); - return 0; -} - -/* - * set the io pins - * this needs a clean up for smaller tighter code - * use *uint and set the address based on cmd + port - */ -int -do_iopset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - uint rcode = 0; - iopin_t iopin; - static uint port = 0; - static uint pin = 0; - static uint value = 0; - static enum { - DIR, - PAR, - SOR, - ODR, - DAT, - } cmd = DAT; - - if (argc != 5) { - puts ("iopset PORT PIN CMD VALUE\n"); - return 1; - } - port = argv[1][0] - 'A'; - if (port > 3) - port -= 0x20; - if (port > 3) - rcode = 1; - pin = simple_strtol (argv[2], NULL, 10); - if (pin > 31) - rcode = 1; - - - switch (argv[3][0]) { - case 'd': - if (argv[3][1] == 'a') - cmd = DAT; - else if (argv[3][1] == 'i') - cmd = DIR; - else - rcode = 1; - break; - case 'p': - cmd = PAR; - break; - case 'o': - cmd = ODR; - break; - case 's': - cmd = SOR; - break; - default: - printf ("iopset: unknown command %s\n", argv[3]); - rcode = 1; - } - if (argv[4][0] == '1') - value = 1; - else if (argv[4][0] == '0') - value = 0; - else - rcode = 1; - if (rcode == 0) { - iopin.port = port; - iopin.pin = pin; - iopin.flag = 0; - switch (cmd) { - case DIR: - if (value) - iopin_set_out (&iopin); - else - iopin_set_in (&iopin); - break; - case PAR: - if (value) - iopin_set_ded (&iopin); - else - iopin_set_gen (&iopin); - break; - case SOR: - if (value) - iopin_set_opt2 (&iopin); - else - iopin_set_opt1 (&iopin); - break; - case ODR: - if (value) - iopin_set_odr (&iopin); - else - iopin_set_act (&iopin); - break; - case DAT: - if (value) - iopin_set_high (&iopin); - else - iopin_set_low (&iopin); - break; - } - - } - return rcode; -} - -int -do_dmainfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} - -int -do_fccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} - -static void prbrg (int n, uint val) -{ - uint extc = (val >> 14) & 3; - uint cd = (val & CPM_BRG_CD_MASK) >> 1; - uint div16 = (val & CPM_BRG_DIV16) != 0; - -#if defined(CONFIG_MPC8260) - ulong clock = gd->arch.brg_clk; -#endif - - printf ("BRG%d:", n); - - if (val & CPM_BRG_RST) - puts (" RESET"); - else - puts (" "); - - if (val & CPM_BRG_EN) - puts (" ENABLED"); - else - puts (" DISABLED"); - - printf (" EXTC=%d", extc); - - if (val & CPM_BRG_ATB) - puts (" ATB"); - else - puts (" "); - - printf (" DIVIDER=%4d", cd); - if (extc == 0 && cd != 0) { - uint baudrate; - - if (div16) - baudrate = (clock / 16) / (cd + 1); - else - baudrate = clock / (cd + 1); - - printf ("=%6d bps", baudrate); - } else { - puts (" "); - } - - if (val & CPM_BRG_DIV16) - puts (" DIV16"); - else - puts (" "); - - putc ('\n'); -} - -int -do_brginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - -#if defined(CONFIG_MPC8260) - volatile uint *p = &immap->im_brgc1; -#endif - int i = 1; - - while (i <= 4) - prbrg (i++, *p++); - -#if defined(CONFIG_MPC8260) - p = &immap->im_brgc5; - while (i <= 8) - prbrg (i++, *p++); -#endif - return 0; -} - -int -do_i2cinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - -#if defined(CONFIG_MPC8260) - volatile i2c8260_t *i2c = &immap->im_i2c; - volatile iic_t *iip; - uint dpaddr; - - dpaddr = immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)]; - if (dpaddr == 0) - iip = NULL; - else - iip = (iic_t *) & immap->im_dprambase[dpaddr]; -#endif - - printf ("I2MOD = %02x I2ADD = %02x\n", i2c->i2c_i2mod, i2c->i2c_i2add); - printf ("I2BRG = %02x I2COM = %02x\n", i2c->i2c_i2brg, i2c->i2c_i2com); - printf ("I2CER = %02x I2CMR = %02x\n", i2c->i2c_i2cer, i2c->i2c_i2cmr); - - if (iip == NULL) - puts ("i2c parameter ram not allocated\n"); - else { - printf ("RBASE = %08x TBASE = %08x\n", - iip->iic_rbase, iip->iic_tbase); - printf ("RFCR = %02x TFCR = %02x\n", - iip->iic_rfcr, iip->iic_tfcr); - printf ("MRBLR = %04x\n", iip->iic_mrblr); - printf ("RSTATE= %08x RDP = %08x\n", - iip->iic_rstate, iip->iic_rdp); - printf ("RBPTR = %04x RBC = %04x\n", - iip->iic_rbptr, iip->iic_rbc); - printf ("RXTMP = %08x\n", iip->iic_rxtmp); - printf ("TSTATE= %08x TDP = %08x\n", - iip->iic_tstate, iip->iic_tdp); - printf ("TBPTR = %04x TBC = %04x\n", - iip->iic_tbptr, iip->iic_tbc); - printf ("TXTMP = %08x\n", iip->iic_txtmp); - } - return 0; -} - -int -do_sccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} - -int -do_smcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} - -int -do_spiinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} - -int -do_muxinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} - -int -do_siinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} - -int -do_mccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unimplemented (cmdtp, flag, argc, argv); - return 0; -} - -/***************************************************/ - -U_BOOT_CMD( - siuinfo, 1, 1, do_siuinfo, - "print System Interface Unit (SIU) registers", - "" -); - -U_BOOT_CMD( - memcinfo, 1, 1, do_memcinfo, - "print Memory Controller registers", - "" -); - -U_BOOT_CMD( - sitinfo, 1, 1, do_sitinfo, - "print System Integration Timers (SIT) registers", - "" -); - -#ifdef CONFIG_MPC8260 -U_BOOT_CMD( - icinfo, 1, 1, do_icinfo, - "print Interrupt Controller registers", - "" -); -#endif - -U_BOOT_CMD( - carinfo, 1, 1, do_carinfo, - "print Clocks and Reset registers", - "" -); - -U_BOOT_CMD( - iopinfo, 1, 1, do_iopinfo, - "print I/O Port registers", - "" -); - -U_BOOT_CMD( - iopset, 5, 0, do_iopset, - "set I/O Port registers", - "PORT PIN CMD VALUE\nPORT: A-D, PIN: 0-31, CMD: [dat|dir|odr|sor], VALUE: 0|1" -); - -U_BOOT_CMD( - dmainfo, 1, 1, do_dmainfo, - "print SDMA/IDMA registers", - "" -); - -U_BOOT_CMD( - fccinfo, 1, 1, do_fccinfo, - "print FCC registers", - "" -); - -U_BOOT_CMD( - brginfo, 1, 1, do_brginfo, - "print Baud Rate Generator (BRG) registers", - "" -); - -U_BOOT_CMD( - i2cinfo, 1, 1, do_i2cinfo, - "print I2C registers", - "" -); - -U_BOOT_CMD( - sccinfo, 1, 1, do_sccinfo, - "print SCC registers", - "" -); - -U_BOOT_CMD( - smcinfo, 1, 1, do_smcinfo, - "print SMC registers", - "" -); - -U_BOOT_CMD( - spiinfo, 1, 1, do_spiinfo, - "print Serial Peripheral Interface (SPI) registers", - "" -); - -U_BOOT_CMD( - muxinfo, 1, 1, do_muxinfo, - "print CPM Multiplexing registers", - "" -); - -U_BOOT_CMD( - siinfo, 1, 1, do_siinfo, - "print Serial Interface (SI) registers", - "" -); - -U_BOOT_CMD( - mccinfo, 1, 1, do_mccinfo, - "print MCC registers", - "" -); - -#endif diff --git a/arch/powerpc/lib/kgdb.c b/arch/powerpc/lib/kgdb.c index 01a7708..88c2af2 100644 --- a/arch/powerpc/lib/kgdb.c +++ b/arch/powerpc/lib/kgdb.c @@ -159,20 +159,6 @@ kgdb_trap(struct pt_regs *regs)
#define SPACE_REQUIRED ((32*4)+(32*8)+(6*4))
-#ifdef CONFIG_MPC8260 -/* store floating double indexed */ -#define STFDI(n,p) __asm__ __volatile__ ("stfd " #n ",%0" : "=o"(p[2*n])) -/* store floating double multiple */ -#define STFDM(p) { STFDI( 0,p); STFDI( 1,p); STFDI( 2,p); STFDI( 3,p); \ - STFDI( 4,p); STFDI( 5,p); STFDI( 6,p); STFDI( 7,p); \ - STFDI( 8,p); STFDI( 9,p); STFDI(10,p); STFDI(11,p); \ - STFDI(12,p); STFDI(13,p); STFDI(14,p); STFDI(15,p); \ - STFDI(16,p); STFDI(17,p); STFDI(18,p); STFDI(19,p); \ - STFDI(20,p); STFDI(21,p); STFDI(22,p); STFDI(23,p); \ - STFDI(24,p); STFDI(25,p); STFDI(26,p); STFDI(27,p); \ - STFDI(28,p); STFDI(29,p); STFDI(30,p); STFDI(31,p); } -#endif - int kgdb_getregs(struct pt_regs *regs, char *buf, int max) { @@ -190,15 +176,10 @@ kgdb_getregs(struct pt_regs *regs, char *buf, int max) *ptr++ = regs->gpr[i];
/* Floating Point Regs */ -#ifdef CONFIG_MPC8260 - STFDM(ptr); - ptr += 32*2; -#else for (i = 0; i < 32; i++) { *ptr++ = 0; *ptr++ = 0; } -#endif
/* pc, msr, cr, lr, ctr, xer, (mq is unused) */ *ptr++ = regs->nip; @@ -212,23 +193,6 @@ kgdb_getregs(struct pt_regs *regs, char *buf, int max) }
/* set the value of the CPU registers */ - -#ifdef CONFIG_MPC8260 -/* load floating double */ -#define LFD(n,v) __asm__ __volatile__ ("lfd " #n ",%0" :: "o"(v)) -/* load floating double indexed */ -#define LFDI(n,p) __asm__ __volatile__ ("lfd " #n ",%0" :: "o"((p)[2*n])) -/* load floating double multiple */ -#define LFDM(p) { LFDI( 0,p); LFDI( 1,p); LFDI( 2,p); LFDI( 3,p); \ - LFDI( 4,p); LFDI( 5,p); LFDI( 6,p); LFDI( 7,p); \ - LFDI( 8,p); LFDI( 9,p); LFDI(10,p); LFDI(11,p); \ - LFDI(12,p); LFDI(13,p); LFDI(14,p); LFDI(15,p); \ - LFDI(16,p); LFDI(17,p); LFDI(18,p); LFDI(19,p); \ - LFDI(20,p); LFDI(21,p); LFDI(22,p); LFDI(23,p); \ - LFDI(24,p); LFDI(25,p); LFDI(26,p); LFDI(27,p); \ - LFDI(28,p); LFDI(29,p); LFDI(30,p); LFDI(31,p); } -#endif - void kgdb_putreg(struct pt_regs *regs, int regno, char *buf, int length) { @@ -251,19 +215,6 @@ kgdb_putreg(struct pt_regs *regs, int regno, char *buf, int length) if (regno >= 0 && regno < 32) regs->gpr[regno] = *ptr; else switch (regno) { - -#ifdef CONFIG_MPC8260 -#define caseF(n) \ - case (n) + 32: LFD(n, *ptr); break; - -caseF( 0) caseF( 1) caseF( 2) caseF( 3) caseF( 4) caseF( 5) caseF( 6) caseF( 7) -caseF( 8) caseF( 9) caseF(10) caseF(11) caseF(12) caseF(13) caseF(14) caseF(15) -caseF(16) caseF(17) caseF(18) caseF(19) caseF(20) caseF(21) caseF(22) caseF(23) -caseF(24) caseF(25) caseF(26) caseF(27) caseF(28) caseF(29) caseF(30) caseF(31) - -#undef caseF -#endif - case 64: regs->nip = *ptr; break; case 65: regs->msr = *ptr; break; case 66: regs->ccr = *ptr; break; @@ -298,9 +249,6 @@ kgdb_putregs(struct pt_regs *regs, char *buf, int length) regs->gpr[i] = *ptr++;
/* Floating Point Regs */ -#ifdef CONFIG_MPC8260 - LFDM(ptr); -#endif ptr += 32*2;
/* pc, msr, cr, lr, ctr, xer, (mq is unused) */ diff --git a/board/keymile/km82xx/Kconfig b/board/keymile/km82xx/Kconfig deleted file mode 100644 index c9a093c..0000000 --- a/board/keymile/km82xx/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_KM82XX - -config SYS_BOARD - default "km82xx" - -config SYS_VENDOR - default "keymile" - -config SYS_CONFIG_NAME - default "km82xx" - -endif diff --git a/board/keymile/km82xx/MAINTAINERS b/board/keymile/km82xx/MAINTAINERS deleted file mode 100644 index 50e06b2..0000000 --- a/board/keymile/km82xx/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -KM82XX BOARD -M: Holger Brunck holger.brunck@keymile.com -S: Maintained -F: board/keymile/km82xx/ -F: include/configs/km82xx.h -F: configs/mgcoge_defconfig -F: configs/mgcoge3ne_defconfig diff --git a/board/keymile/km82xx/Makefile b/board/keymile/km82xx/Makefile deleted file mode 100644 index 20f193a..0000000 --- a/board/keymile/km82xx/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := km82xx.o ../common/common.o ../common/ivm.o diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c deleted file mode 100644 index f5a98b3..0000000 --- a/board/keymile/km82xx/km82xx.c +++ /dev/null @@ -1,463 +0,0 @@ -/* - * (C) Copyright 2007 - 2008 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8260.h> -#include <ioports.h> -#include <malloc.h> -#include <asm/io.h> - -#include <libfdt.h> -#include <i2c.h> -#include "../common/common.h" - -DECLARE_GLOBAL_DATA_PTR; - -static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A */ - { /* conf ppar psor pdir podr pdat */ - { 0, 0, 0, 0, 0, 0 }, /* PA31 */ - { 0, 0, 0, 0, 0, 0 }, /* PA30 */ - { 0, 0, 0, 0, 0, 0 }, /* PA29 */ - { 0, 0, 0, 0, 0, 0 }, /* PA28 */ - { 0, 0, 0, 0, 0, 0 }, /* PA27 */ - { 0, 0, 0, 0, 0, 0 }, /* PA26 */ - { 0, 0, 0, 0, 0, 0 }, /* PA25 */ - { 0, 0, 0, 0, 0, 0 }, /* PA24 */ - { 0, 0, 0, 0, 0, 0 }, /* PA23 */ - { 0, 0, 0, 0, 0, 0 }, /* PA22 */ - { 0, 0, 0, 0, 0, 0 }, /* PA21 */ - { 0, 0, 0, 0, 0, 0 }, /* PA20 */ - { 0, 0, 0, 0, 0, 0 }, /* PA19 */ - { 0, 0, 0, 0, 0, 0 }, /* PA18 */ - { 0, 0, 0, 0, 0, 0 }, /* PA17 */ - { 0, 0, 0, 0, 0, 0 }, /* PA16 */ - { 0, 0, 0, 0, 0, 0 }, /* PA15 */ - { 0, 0, 0, 0, 0, 0 }, /* PA14 */ - { 0, 0, 0, 0, 0, 0 }, /* PA13 */ - { 0, 0, 0, 0, 0, 0 }, /* PA12 */ - { 0, 0, 0, 0, 0, 0 }, /* PA11 */ - { 0, 0, 0, 0, 0, 0 }, /* PA10 */ - { 1, 1, 0, 1, 0, 0 }, /* PA9 SMC2 TxD */ - { 1, 1, 0, 0, 0, 0 }, /* PA8 SMC2 RxD */ - { 0, 0, 0, 0, 0, 0 }, /* PA7 */ - { 0, 0, 0, 0, 0, 0 }, /* PA6 */ - { 0, 0, 0, 0, 0, 0 }, /* PA5 */ - { 0, 0, 0, 0, 0, 0 }, /* PA4 */ - { 0, 0, 0, 0, 0, 0 }, /* PA3 */ - { 0, 0, 0, 0, 0, 0 }, /* PA2 */ - { 0, 0, 0, 0, 0, 0 }, /* PA1 */ - { 0, 0, 0, 0, 0, 0 } /* PA0 */ - }, - - /* Port B */ - { /* conf ppar psor pdir podr pdat */ - { 0, 0, 0, 0, 0, 0 }, /* PB31 */ - { 0, 0, 0, 0, 0, 0 }, /* PB30 */ - { 0, 0, 0, 0, 0, 0 }, /* PB29 */ - { 0, 0, 0, 0, 0, 0 }, /* PB28 */ - { 0, 0, 0, 0, 0, 0 }, /* PB27 */ - { 0, 0, 0, 0, 0, 0 }, /* PB26 */ - { 0, 0, 0, 0, 0, 0 }, /* PB25 */ - { 0, 0, 0, 0, 0, 0 }, /* PB24 */ - { 0, 0, 0, 0, 0, 0 }, /* PB23 */ - { 0, 0, 0, 0, 0, 0 }, /* PB22 */ - { 0, 0, 0, 0, 0, 0 }, /* PB21 */ - { 0, 0, 0, 0, 0, 0 }, /* PB20 */ - { 0, 0, 0, 0, 0, 0 }, /* PB19 */ - { 0, 0, 0, 0, 0, 0 }, /* PB18 */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 } /* non-existent */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - { 0, 0, 0, 0, 0, 0 }, /* PC31 */ - { 0, 0, 0, 0, 0, 0 }, /* PC30 */ - { 0, 0, 0, 0, 0, 0 }, /* PC29 */ - { 0, 0, 0, 0, 0, 0 }, /* PC28 */ - { 0, 0, 0, 0, 0, 0 }, /* PC27 */ - { 0, 0, 0, 0, 0, 0 }, /* PC26 */ - { 1, 1, 0, 0, 0, 0 }, /* PC25 RxClk */ - { 1, 1, 0, 0, 0, 0 }, /* PC24 TxClk */ - { 0, 0, 0, 0, 0, 0 }, /* PC23 */ - { 0, 0, 0, 0, 0, 0 }, /* PC22 */ - { 0, 0, 0, 0, 0, 0 }, /* PC21 */ - { 0, 0, 0, 0, 0, 0 }, /* PC20 */ - { 0, 0, 0, 0, 0, 0 }, /* PC19 */ - { 0, 0, 0, 0, 0, 0 }, /* PC18 */ - { 0, 0, 0, 0, 0, 0 }, /* PC17 */ - { 0, 0, 0, 0, 0, 0 }, /* PC16 */ - { 0, 0, 0, 0, 0, 0 }, /* PC15 */ - { 0, 0, 0, 0, 0, 0 }, /* PC14 */ - { 0, 0, 0, 0, 0, 0 }, /* PC13 */ - { 0, 0, 0, 0, 0, 0 }, /* PC12 */ - { 0, 0, 0, 0, 0, 0 }, /* PC11 */ - { 0, 0, 0, 0, 0, 0 }, /* PC10 */ - { 1, 1, 0, 0, 0, 0 }, /* PC9 SCC4: CTS */ - { 1, 1, 0, 0, 0, 0 }, /* PC8 SCC4: CD */ - { 0, 0, 0, 0, 0, 0 }, /* PC7 */ - { 0, 0, 0, 0, 0, 0 }, /* PC6 */ - { 0, 0, 0, 0, 0, 0 }, /* PC5 */ - { 0, 0, 0, 0, 0, 0 }, /* PC4 */ - { 0, 0, 0, 0, 0, 0 }, /* PC3 */ - { 0, 0, 0, 0, 0, 0 }, /* PC2 */ - { 0, 0, 0, 0, 0, 0 }, /* PC1 */ - { 0, 0, 0, 0, 0, 0 }, /* PC0 */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - { 0, 0, 0, 0, 0, 0 }, /* PD31 */ - { 0, 0, 0, 0, 0, 0 }, /* PD30 */ - { 0, 0, 0, 0, 0, 0 }, /* PD29 */ - { 0, 0, 0, 0, 0, 0 }, /* PD28 */ - { 0, 0, 0, 0, 0, 0 }, /* PD27 */ - { 0, 0, 0, 0, 0, 0 }, /* PD26 */ - { 0, 0, 0, 0, 0, 0 }, /* PD25 */ - { 0, 0, 0, 0, 0, 0 }, /* PD24 */ - { 0, 0, 0, 0, 0, 0 }, /* PD23 */ - { 1, 1, 0, 0, 0, 0 }, /* PD22 SCC4: RXD */ - { 1, 1, 0, 1, 0, 0 }, /* PD21 SCC4: TXD */ - { 1, 1, 0, 1, 0, 0 }, /* PD20 SCC4: RTS */ - { 0, 0, 0, 0, 0, 0 }, /* PD19 */ - { 0, 0, 0, 0, 0, 0 }, /* PD18 */ - { 0, 0, 0, 0, 0, 0 }, /* PD17 */ - { 0, 0, 0, 0, 0, 0 }, /* PD16 */ - { 1, 0, 0, 0, 1, 1 }, /* PD15 */ - { 1, 0, 0, 1, 1, 1 }, /* PD14 */ - { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - { 0, 0, 0, 0, 0, 0 }, /* PD9 */ - { 0, 0, 0, 0, 0, 0 }, /* PD8 */ - { 0, 0, 0, 0, 0, 0 }, /* PD7 */ - { 0, 0, 0, 0, 0, 0 }, /* PD6 */ - { 0, 0, 0, 0, 0, 0 }, /* PD5 */ - { 0, 0, 0, 0, 0, 0 }, /* PD4 */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 }, /* non-existent */ - { 0, 0, 0, 0, 0, 0 } /* non-existent */ - } -}; - -/* - * Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx - * - * This routine performs standard 8260 initialization sequence - * and calculates the available memory size. It may be called - * several times to try different SDRAM configurations on both - * 60x and local buses. - */ -static long int try_init(memctl8260_t *memctl, ulong sdmr, - ulong orx, uchar *base) -{ - uchar c = 0xff; - ulong maxsize, size; - int i; - - /* - * We must be able to test a location outsize the maximum legal size - * to find out THAT we are outside; but this address still has to be - * mapped by the controller. That means, that the initial mapping has - * to be (at least) twice as large as the maximum expected size. - */ - maxsize = (1 + (~orx | 0x7fff))/* / 2*/; - - out_be32(&memctl->memc_or1, orx); - - /* - * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): - * - * "At system reset, initialization software must set up the - * programmable parameters in the memory controller banks registers - * (ORx, BRx, P/LSDMR). After all memory parameters are configured, - * system software should execute the following initialization sequence - * for each SDRAM device. - * - * 1. Issue a PRECHARGE-ALL-BANKS command - * 2. Issue eight CBR REFRESH commands - * 3. Issue a MODE-SET command to initialize the mode register - * - * The initial commands are executed by setting P/LSDMR[OP] and - * accessing the SDRAM with a single-byte transaction." - * - * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address - * CONFIG_SYS_SDRAM_BASE. - */ - - out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_PREA); - out_8(base, c); - - out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_CBRR); - for (i = 0; i < 8; i++) - out_8(base, c); - - out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_MRW); - /* setting MR on address lines */ - out_8((uchar *)(base + CONFIG_SYS_MRS_OFFS), c); - - out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_NORM | PSDMR_RFEN); - out_8(base, c); - - size = get_ram_size((long *)base, maxsize); - out_be32(&memctl->memc_or1, orx | ~(size - 1)); - - return size; -} - -#ifdef CONFIG_SYS_SDRAM_LIST - -/* - * If CONFIG_SYS_SDRAM_LIST is defined, we cycle through all SDRAM - * configurations therein (should be from high to lower) to find the - * one actually matching the current configuration. - * CONFIG_SYS_PSDMR and CONFIG_SYS_OR1 will contain the base values which are - * common among all possible configurations; values in CONFIG_SYS_SDRAM_LIST - * (defined as the initialization value for the array of struct sdram_conf_s) - * will then be ORed with such base values. - */ - -struct sdram_conf_s { - ulong size; - int or1; - int psdmr; -}; - -static struct sdram_conf_s sdram_conf[] = CONFIG_SYS_SDRAM_LIST; - -static long probe_sdram(memctl8260_t *memctl) -{ - int n = 0; - long psize = 0; - - for (n = 0; n < ARRAY_SIZE(sdram_conf); psize = 0, n++) { - psize = try_init(memctl, - CONFIG_SYS_PSDMR | sdram_conf[n].psdmr, - CONFIG_SYS_OR1 | sdram_conf[n].or1, - (uchar *) CONFIG_SYS_SDRAM_BASE); - debug("Probing %ld bytes returned %ld\n", - sdram_conf[n].size, psize); - if (psize == sdram_conf[n].size) - break; - } - return psize; -} - -#else /* CONFIG_SYS_SDRAM_LIST */ - -static long probe_sdram(memctl8260_t *memctl) -{ - return try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1, - (uchar *) CONFIG_SYS_SDRAM_BASE); -} -#endif /* CONFIG_SYS_SDRAM_LIST */ - - -int dram_init(void) -{ - immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - memctl8260_t *memctl = &immap->im_memctl; - - long psize; - - out_8(&memctl->memc_psrt, CONFIG_SYS_PSRT); - out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR); - - /* 60x SDRAM setup: - */ - psize = probe_sdram(memctl); - - icache_enable(); - - gd->ram_size = psize; - - return 0; -} - -int checkboard(void) -{ -#if defined(CONFIG_MGCOGE) - puts("Board: Keymile mgcoge"); -#else - puts("Board: Keymile mgcoge3ne"); -#endif - if (ethernet_present()) - puts(" with PIGGY."); - puts("\n"); - return 0; -} - -int last_stage_init(void) -{ - struct bfticu_iomap *base = - (struct bfticu_iomap *)CONFIG_SYS_FPGA_BASE; - u8 dip_switch; - - dip_switch = in_8(&base->mswitch); - dip_switch &= BFTICU_DIPSWITCH_MASK; - /* dip switch 'full reset' or 'db erase' or 'Local mgmt IP' or any */ - if (dip_switch != 0) { - /* start bootloader */ - puts("DIP: Enabled\n"); - setenv("actual_bank", "0"); - } - set_km_env(); - return 0; -} - -#ifdef CONFIG_MGCOGE3NE -static void set_pin(int state, unsigned long mask, int port); - -/* - * For mgcoge3ne boards, the mgcoge3un control is controlled from - * a GPIO line on the PPC CPU. If bobcatreset is set the line - * will toggle once what forces the mgocge3un part to restart - * immediately. - */ -static void handle_mgcoge3un_reset(void) -{ - char *bobcatreset = getenv("bobcatreset"); - if (bobcatreset) { - if (strcmp(bobcatreset, "true") == 0) { - puts("Forcing bobcat reset\n"); - set_pin(0, 0x00000004, 3); /* clear PD29 (reset arm) */ - udelay(1000); - set_pin(1, 0x00000004, 3); - } else - set_pin(1, 0x00000004, 3); /* don't reset arm */ - } -} -#endif - -int ethernet_present(void) -{ - struct km_bec_fpga *base = - (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; - - return in_8(&base->bprth) & PIGGY_PRESENT; -} - -/* - * Early board initalization. - */ -int board_early_init_r(void) -{ - struct km_bec_fpga *base = - (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; - - /* setup the UPIOx */ - /* General Unit Reset disabled, Flash Bank enabled, UnitLed on */ - out_8(&base->oprth, (WRG_RESET | H_OPORTS_14 | WRG_LED)); - /* SCC4 enable, halfduplex, FCC1 powerdown */ - out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA | - H_OPORTS_FCC1_PW_DWN)); - -#ifdef CONFIG_MGCOGE3NE - handle_mgcoge3un_reset(); -#endif - return 0; -} - -int misc_init_r(void) -{ - ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN); - return 0; -} - -int hush_init_var(void) -{ - ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN); - return 0; -} - -#define SDA_MASK 0x00010000 -#define SCL_MASK 0x00020000 - -static void set_pin(int state, unsigned long mask, int port) -{ - ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, port); - - if (state) - setbits_be32(&iop->pdat, mask); - else - clrbits_be32(&iop->pdat, mask); - - setbits_be32(&iop->pdir, mask); -} - -static int get_pin(unsigned long mask, int port) -{ - ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, port); - - clrbits_be32(&iop->pdir, mask); - return 0 != (in_be32(&iop->pdat) & mask); -} - -void set_sda(int state) -{ - set_pin(state, SDA_MASK, 3); -} - -void set_scl(int state) -{ - set_pin(state, SCL_MASK, 3); -} - -int get_sda(void) -{ - return get_pin(SDA_MASK, 3); -} - -int get_scl(void) -{ - return get_pin(SCL_MASK, 3); -} - -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} - -#if defined(CONFIG_MGCOGE3NE) -int get_testpin(void) -{ - /* Testpin is Port C pin 29 - enable = low */ - int testpin = !get_pin(0x00000004, 2); - return testpin; -} -#endif diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index 484a853..81967ff 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -184,7 +184,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num("sramstart", bd->bi_sramstart); print_num("sramsize", bd->bi_sramsize); #if defined(CONFIG_5xx) || \ - defined(CONFIG_MPC8260) || defined(CONFIG_E500) + defined(CONFIG_E500) print_num("immr_base", bd->bi_immr_base); #endif print_num("bootflags", bd->bi_bootflags); diff --git a/cmd/bedbug.c b/cmd/bedbug.c index 14663dc..3206757 100644 --- a/cmd/bedbug.c +++ b/cmd/bedbug.c @@ -54,13 +54,6 @@ void bedbug_init (void) bedbug405_init (); #endif
-#if defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260) - /* Processors that are 603e core based */ - void bedbug603e_init (void); - - bedbug603e_init (); -#endif - return; } /* bedbug_init */
diff --git a/common/board_f.c b/common/board_f.c index a3f8704..b02ca37 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -547,7 +547,7 @@ static int setup_board_part1(void) bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */ #endif
-#if defined(CONFIG_MPC8260) || defined(CONFIG_5xx) || \ +#if defined(CONFIG_5xx) || \ defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif diff --git a/common/lynxkdi.c b/common/lynxkdi.c index 22ad384..9856015 100644 --- a/common/lynxkdi.c +++ b/common/lynxkdi.c @@ -22,7 +22,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_MPC8260) || defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) void lynxkdi_boot(image_header_t *hdr) { void (*lynxkdi)(void) = (void(*)(void))image_get_ep(hdr); diff --git a/configs/mgcoge3ne_defconfig b/configs/mgcoge3ne_defconfig deleted file mode 100644 index 58d6656..0000000 --- a/configs/mgcoge3ne_defconfig +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_CMD_IMMAP=y -CONFIG_TARGET_KM82XX=y -CONFIG_FIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="MGCOGE3NE" -CONFIG_VERSION_VARIABLE=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_UBI=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/mgcoge_defconfig b/configs/mgcoge_defconfig deleted file mode 100644 index c4f39b3..0000000 --- a/configs/mgcoge_defconfig +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_CMD_IMMAP=y -CONFIG_TARGET_KM82XX=y -CONFIG_FIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="MGCOGE" -CONFIG_VERSION_VARIABLE=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_UBI=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/doc/README.idma2intr b/doc/README.idma2intr deleted file mode 100644 index 1828b51..0000000 --- a/doc/README.idma2intr +++ /dev/null @@ -1,10 +0,0 @@ -(C) 2003 Arun Dharankar ADharankar@ATTBI.Com - -Attached is an IDMA example code for MPC8260/PPCBoot. I had tried to -search around and could not find any for implementing IDMA, so -implemented one. Its not coded in the best way, but works. - -Also, I was able to test the IDMA specific code under Linux also -(with modifications). My requirement was to implement it for -CompactFlash implemented in memory mode, and it works for it under -PPCBoot and Linux. diff --git a/drivers/bootcount/bootcount.c b/drivers/bootcount/bootcount.c index f922cfb..f1425cb 100644 --- a/drivers/bootcount/bootcount.c +++ b/drivers/bootcount/bootcount.c @@ -24,11 +24,6 @@ #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD #endif /* defined(CONFIG_MPC512X) */
-#if defined(CONFIG_MPC8260) -#include <asm/cpm_8260.h> -#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR) -#endif /* defined(CONFIG_MPC8260) */ - #if defined(CONFIG_QE) #include <linux/immap_qe.h> #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_IMMR + 0x110000 + \ diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 9380a04..de3758d 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -17,10 +17,6 @@ */
#include <common.h> -#ifdef CONFIG_MPC8260 /* only valid for MPC8260 */ -#include <ioports.h> -#include <asm/io.h> -#endif #if defined(CONFIG_AVR32) #include <asm/arch/portmux.h> #endif @@ -94,12 +90,7 @@ DECLARE_GLOBAL_DATA_PTR;
#ifndef I2C_SOFT_DECLARATIONS -# if defined(CONFIG_MPC8260) -# define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = \ - ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT); -# else # define I2C_SOFT_DECLARATIONS -# endif #endif
#if !defined(CONFIG_SYS_I2C_SOFT_SPEED) diff --git a/drivers/pci/pci_indirect.c b/drivers/pci/pci_indirect.c index aee0bd6..efa13a2 100644 --- a/drivers/pci/pci_indirect.c +++ b/drivers/pci/pci_indirect.c @@ -17,22 +17,7 @@ #define cfg_read(val, addr, type, op) *val = op((type)(addr)) #define cfg_write(val, addr, type, op) op((type *)(addr), (val))
-#if defined(CONFIG_MPC8260) -#define INDIRECT_PCI_OP(rw, size, type, op, mask) \ -static int \ -indirect_##rw##_config_##size(struct pci_controller *hose, \ - pci_dev_t dev, int offset, type val) \ -{ \ - u32 b, d,f; \ - b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \ - b = b - hose->first_busno; \ - dev = PCI_BDF(b, d, f); \ - out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \ - sync(); \ - cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ - return 0; \ -} -#elif defined(CONFIG_E500) || defined(CONFIG_MPC86xx) +#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx) #define INDIRECT_PCI_OP(rw, size, type, op, mask) \ static int \ indirect_##rw##_config_##size(struct pci_controller *hose, \ diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index 0e3ba94..f320708 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -125,13 +125,6 @@ #define gadget_is_musbhdrc(g) 0 #endif
-/* from Montavista kernel (?) */ -#ifdef CONFIG_USB_GADGET_MPC8272 -#define gadget_is_mpc8272(g) (!strcmp("mpc8272_udc", (g)->name)) -#else -#define gadget_is_mpc8272(g) 0 -#endif - #ifdef CONFIG_USB_GADGET_M66592 #define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name)) #else @@ -209,8 +202,6 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x14; else if (gadget_is_musbhdrc(gadget)) return 0x15; - else if (gadget_is_mpc8272(gadget)) - return 0x16; else if (gadget_is_atmel_usba(gadget)) return 0x17; else if (gadget_is_fsl_usb2(gadget)) diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile index 4c25f6f..810d285 100644 --- a/examples/standalone/Makefile +++ b/examples/standalone/Makefile @@ -10,7 +10,6 @@ extra-$(CONFIG_SMC91111) += smc91111_eeprom extra-$(CONFIG_SMC911X) += smc911x_eeprom extra-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2 extra-$(CONFIG_MPC5xxx) += interrupt -extra-$(CONFIG_MPC8260) += mem_to_mem_idma2intr extra-$(CONFIG_PPC) += sched
# diff --git a/examples/standalone/mem_to_mem_idma2intr.c b/examples/standalone/mem_to_mem_idma2intr.c deleted file mode 100644 index ce6e6c4..0000000 --- a/examples/standalone/mem_to_mem_idma2intr.c +++ /dev/null @@ -1,379 +0,0 @@ -/* The dpalloc function used and implemented in this file was derieved - * from PPCBoot/U-Boot file "arch/powerpc/cpu/mpc8260/commproc.c". - */ - -/* Author: Arun Dharankar ADharankar@ATTBI.Com - * This example is meant to only demonstrate how the IDMA could be used. - */ - -/* - * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's - * copyright notice: - * - * General Purpose functions for the global management of the - * 8260 Communication Processor Module. - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com) - * 2.3.99 Updates - * - * In addition to the individual control of the communication - * channels, there are a few functions that globally affect the - * communication processor. - * - * Buffer descriptors must be allocated from the dual ported memory - * space. The allocator for that is here. When the communication - * process is reset, we reclaim the memory available. There is - * currently no deallocator for this memory. - */ - - -#include <common.h> -#include <console.h> -#include <exports.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define STANDALONE - -#ifndef STANDALONE /* Linked into/Part of PPCBoot */ -#include <command.h> -#include <watchdog.h> -#else /* Standalone app of PPCBoot */ -#define WATCHDOG_RESET() { \ - *(ushort *)(CONFIG_SYS_IMMR + 0x1000E) = 0x556c; \ - *(ushort *)(CONFIG_SYS_IMMR + 0x1000E) = 0xaa39; \ - } -#endif /* STANDALONE */ - -static int debug = 1; - -#define DEBUG(fmt, args...) { \ - if(debug != 0) { \ - printf("[%s %d %s]: ",__FILE__,__LINE__,__FUNCTION__); \ - printf(fmt, ##args); \ - } \ -} - -#define CPM_CR_IDMA1_SBLOCK (0x14) -#define CPM_CR_IDMA2_SBLOCK (0x15) -#define CPM_CR_IDMA3_SBLOCK (0x16) -#define CPM_CR_IDMA4_SBLOCK (0x17) -#define CPM_CR_IDMA1_PAGE (0x07) -#define CPM_CR_IDMA2_PAGE (0x08) -#define CPM_CR_IDMA3_PAGE (0x09) -#define CPM_CR_IDMA4_PAGE (0x0a) -#define PROFF_IDMA1_BASE ((uint)0x87fe) -#define PROFF_IDMA2_BASE ((uint)0x88fe) -#define PROFF_IDMA3_BASE ((uint)0x89fe) -#define PROFF_IDMA4_BASE ((uint)0x8afe) - -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_FLG ((ushort)0x0001) - -#define mk_cr_cmd(PG, SBC, MCN, OP) \ - ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) - - -#pragma pack(1) -typedef struct ibdbits { - unsigned b_valid:1; - unsigned b_resv1:1; - unsigned b_wrap:1; - unsigned b_interrupt:1; - unsigned b_last:1; - unsigned b_resv2:1; - unsigned b_cm:1; - unsigned b_resv3:2; - unsigned b_sdn:1; - unsigned b_ddn:1; - unsigned b_dgbl:1; - unsigned b_dbo:2; - unsigned b_resv4:1; - unsigned b_ddtb:1; - unsigned b_resv5:2; - unsigned b_sgbl:1; - unsigned b_sbo:2; - unsigned b_resv6:1; - unsigned b_sdtb:1; - unsigned b_resv7:9; -} ibdbits_t; - -#pragma pack(1) -typedef union ibdbitsu { - ibdbits_t b; - uint i; -} ibdbitsu_t; - -#pragma pack(1) -typedef struct idma_buf_desc { - ibdbitsu_t ibd_bits; /* Status and Control */ - uint ibd_datlen; /* Data length in buffer */ - uint ibd_sbuf; /* Source buffer addr in host mem */ - uint ibd_dbuf; /* Destination buffer addr in host mem */ -} ibd_t; - - -#pragma pack(1) -typedef struct dcmbits { - unsigned b_fb:1; - unsigned b_lp:1; - unsigned b_resv1:3; - unsigned b_tc2:1; - unsigned b_resv2:1; - unsigned b_wrap:3; - unsigned b_sinc:1; - unsigned b_dinc:1; - unsigned b_erm:1; - unsigned b_dt:1; - unsigned b_sd:2; -} dcmbits_t; - -#pragma pack(1) -typedef union dcmbitsu { - dcmbits_t b; - ushort i; -} dcmbitsu_t; - -#pragma pack(1) -typedef struct pram_idma { - ushort pi_ibase; - dcmbitsu_t pi_dcmbits; - ushort pi_ibdptr; - ushort pi_dprbuf; - ushort pi_bufinv; /* internal to CPM */ - ushort pi_ssmax; - ushort pi_dprinptr; /* internal to CPM */ - ushort pi_sts; - ushort pi_dproutptr; /* internal to CPM */ - ushort pi_seob; - ushort pi_deob; - ushort pi_dts; - ushort pi_retadd; - ushort pi_resv1; /* internal to CPM */ - uint pi_bdcnt; - uint pi_sptr; - uint pi_dptr; - uint pi_istate; -} pram_idma_t; - - -volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -volatile ibd_t *bdf; -volatile pram_idma_t *piptr; - -volatile int dmadone; -volatile int *dmadonep = &dmadone; -void dmadone_handler (void *); - -int idma_init (void); -void idma_start (int, int, int, uint, uint, int); -uint dpalloc (uint, uint); - - -uint dpinit_done = 0; - - -#ifdef STANDALONE -int ctrlc (void) -{ - if (tstc()) { - switch (getc ()) { - case 0x03: /* ^C - Control C */ - return 1; - default: - break; - } - } - return 0; -} -int memcmp(const void * cs,const void * ct,size_t count) -{ - const unsigned char *su1, *su2; - int res = 0; - for( su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--) - if ((res = *su1 - *su2) != 0) - break; - return res; -} -#endif /* STANDALONE */ - -#ifdef STANDALONE -int mem_to_mem_idma2intr (int argc, char * const argv[]) -#else -int do_idma (bd_t * bd, int argc, char * const argv[]) -#endif /* STANDALONE */ -{ - int i; - - app_startup(argv); - dpinit_done = 0; - - idma_init (); - - DEBUG ("Installing dma handler\n"); - install_hdlr (7, dmadone_handler, (void *) bdf); - - memset ((void *) 0x100000, 'a', 512); - memset ((void *) 0x200000, 'b', 512); - - for (i = 0; i < 32; i++) { - printf ("Startin IDMA, iteration=%d\n", i); - idma_start (1, 1, 512, 0x100000, 0x200000, 3); - } - - DEBUG ("Uninstalling dma handler\n"); - free_hdlr (7); - - return 0; -} - -void -idma_start (int sinc, int dinc, int sz, uint sbuf, uint dbuf, int ttype) -{ - /* ttype is for M-M, M-P, P-M or P-P: not used for now */ - - piptr->pi_istate = 0; /* manual says: clear it before every START_IDMA */ - piptr->pi_dcmbits.b.b_resv1 = 0; - - if (sinc == 1) - piptr->pi_dcmbits.b.b_sinc = 1; - else - piptr->pi_dcmbits.b.b_sinc = 0; - - if (dinc == 1) - piptr->pi_dcmbits.b.b_dinc = 1; - else - piptr->pi_dcmbits.b.b_dinc = 0; - - piptr->pi_dcmbits.b.b_erm = 0; - piptr->pi_dcmbits.b.b_sd = 0x00; /* M-M */ - - bdf->ibd_sbuf = sbuf; - bdf->ibd_dbuf = dbuf; - bdf->ibd_bits.b.b_cm = 0; - bdf->ibd_bits.b.b_interrupt = 1; - bdf->ibd_bits.b.b_wrap = 1; - bdf->ibd_bits.b.b_last = 1; - bdf->ibd_bits.b.b_sdn = 0; - bdf->ibd_bits.b.b_ddn = 0; - bdf->ibd_bits.b.b_dgbl = 0; - bdf->ibd_bits.b.b_ddtb = 0; - bdf->ibd_bits.b.b_sgbl = 0; - bdf->ibd_bits.b.b_sdtb = 0; - bdf->ibd_bits.b.b_dbo = 1; - bdf->ibd_bits.b.b_sbo = 1; - bdf->ibd_bits.b.b_valid = 1; - bdf->ibd_datlen = 512; - - *dmadonep = 0; - - immap->im_sdma.sdma_idmr2 = (uchar) 0xf; - - immap->im_cpm.cp_cpcr = mk_cr_cmd (CPM_CR_IDMA2_PAGE, - CPM_CR_IDMA2_SBLOCK, 0x0, - 0x9) | 0x00010000; - - while (*dmadonep != 1) { - if (ctrlc ()) { - DEBUG ("\nInterrupted waiting for DMA interrupt.\n"); - goto done; - } - printf ("Waiting for DMA interrupt (dmadone=%d b_valid = %d)...\n", - dmadone, bdf->ibd_bits.b.b_valid); - udelay (1000000); - } - printf ("DMA complete notification received!\n"); - - done: - DEBUG ("memcmp(0x%08x, 0x%08x, 512) = %d\n", - sbuf, dbuf, memcmp ((void *) sbuf, (void *) dbuf, 512)); - - return; -} - -#define MAX_INT_BUFSZ 64 -#define DCM_WRAP 0 /* MUST be consistant with MAX_INT_BUFSZ */ - -int idma_init (void) -{ - uint memaddr; - - immap->im_cpm.cp_rccr &= ~0x00F3FFFF; - immap->im_cpm.cp_rccr |= 0x00A00A00; - - memaddr = dpalloc (sizeof (pram_idma_t), 64); - - *(volatile u16 *)&immap->im_dprambase16 - [PROFF_IDMA2_BASE / sizeof(u16)] = memaddr; - piptr = (volatile pram_idma_t *) ((uint) (immap) + memaddr); - - piptr->pi_resv1 = 0; /* manual says: clear it */ - piptr->pi_dcmbits.b.b_fb = 0; - piptr->pi_dcmbits.b.b_lp = 1; - piptr->pi_dcmbits.b.b_erm = 0; - piptr->pi_dcmbits.b.b_dt = 0; - - memaddr = (uint) dpalloc (sizeof (ibd_t), 64); - piptr->pi_ibase = piptr->pi_ibdptr = (volatile short) memaddr; - bdf = (volatile ibd_t *) ((uint) (immap) + memaddr); - bdf->ibd_bits.b.b_valid = 0; - - memaddr = (uint) dpalloc (64, 64); - piptr->pi_dprbuf = (volatile ushort) memaddr; - piptr->pi_dcmbits.b.b_wrap = 4; - piptr->pi_ssmax = 32; - - piptr->pi_sts = piptr->pi_ssmax; - piptr->pi_dts = piptr->pi_ssmax; - - return 1; -} - -void dmadone_handler (void *arg) -{ - immap->im_sdma.sdma_idmr2 = (uchar) 0x0; - - *dmadonep = 1; - - return; -} - - -static uint dpbase = 0; - -uint dpalloc (uint size, uint align) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - uint retloc; - uint align_mask, off; - uint savebase; - - /* Pointer to initial global data area */ - - if (dpinit_done == 0) { - dpbase = gd->arch.dp_alloc_base; - dpinit_done = 1; - } - - align_mask = align - 1; - savebase = dpbase; - - if ((off = (dpbase & align_mask)) != 0) - dpbase += (align - off); - - if ((off = size & align_mask) != 0) - size += align - off; - - if ((dpbase + size) >= gd->arch.dp_alloc_top) { - dpbase = savebase; - printf ("dpalloc: ran out of dual port ram!"); - return 0; - } - - retloc = dpbase; - dpbase += size; - - memset ((void *) &immr->im_dprambase[retloc], 0, size); - - return (retloc); -} diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index 4374c2e..a779713 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -41,7 +41,7 @@ typedef struct bd_info { unsigned long bi_dsp_freq; /* dsp core frequency */ unsigned long bi_ddr_freq; /* ddr frequency */ #endif -#if defined(CONFIG_5xx) || defined(CONFIG_MPC8260) \ +#if defined(CONFIG_5xx) \ || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) unsigned long bi_immr_base; /* base of IMMR register */ #endif diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h deleted file mode 100644 index 09c3aa9..0000000 --- a/include/configs/km82xx.h +++ /dev/null @@ -1,427 +0,0 @@ -/* - * (C) Copyright 2007-2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8247 -/* MGCOGE */ -#if defined(CONFIG_MGCOGE) -#define CONFIG_HOSTNAME mgcoge -#define CONFIG_KM_BOARD_EXTRA_ENV "" - -/* MGCOGE3NE */ -#elif defined(CONFIG_MGCOGE3NE) -#define CONFIG_HOSTNAME mgcoge3ne -#define CONFIG_KM_82XX -#define CONFIG_KM_BOARD_EXTRA_ENV "bobcatreset=true\0" - -#else -#error ("Board unsupported") -#endif - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_MISC_INIT_R - -/* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_SIZE 32 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER - -/* MGCOGE */ -#if defined(CONFIG_MGCOGE) -#define CONFIG_SYS_MAX_FLASH_BANKS 3 -/* max num of sects on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#define CONFIG_SYS_FLASH_BASE_1 0x50000000 -#define CONFIG_SYS_FLASH_SIZE_1 32 -#define CONFIG_SYS_FLASH_BASE_2 0x52000000 -#define CONFIG_SYS_FLASH_SIZE_2 32 - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE_1, \ - CONFIG_SYS_FLASH_BASE_2 } -#define MTDIDS_DEFAULT "nor3=app" - -/* - * Bank 1 - 60x bus SDRAM - */ -#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ -#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */ - -/* SDRAM initialization values -*/ - -#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \ - ORxS_SDAM_MSK) |\ - ORxS_BPD_8 |\ - ORxS_ROWST_PBI0_A7 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_PSDMR ( \ - PSDMR_SDAM_A14_IS_A5 |\ - PSDMR_BSMA_A14_A16 |\ - PSDMR_SDA10_PBI0_A9 |\ - PSDMR_RFRC_5_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - -/* MGCOGE3NE */ -#elif defined(CONFIG_MGCOGE3NE) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* - * max num of sects on one - * chip - */ - -#define CONFIG_SYS_FLASH_BASE_1 0x50000000 -#define CONFIG_SYS_FLASH_SIZE_1 128 - -#define CONFIG_SYS_FLASH_SIZE_2 0 /* dummy value to calc SYS_OR5 */ - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE_1 } - -#define MTDIDS_DEFAULT "nor2=app" - -/* - * Bank 1 - 60x bus SDRAM - * mgcoge3ne has 256MB - * mgcoge2ne has 128MB - */ -#define SDRAM_MAX_SIZE 0x10000000 /* max. 256 MB */ -#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512 << 20) /* less than 512 MB */ - -#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \ - ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_NUMR_13 |\ - ORxS_IBID) - -#define CONFIG_SYS_PSDMR ( \ - PSDMR_PBI |\ - PSDMR_RFEN |\ - PSDMR_BSMA_A13_A15 |\ - PSDMR_RFRC_5_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - -#define CONFIG_SYS_SDRAM_LIST { \ - { .size = 256 << 20, \ - .or1 = ORxS_ROWST_PBI1_A4, \ - .psdmr = PSDMR_SDAM_A17_IS_A5 | PSDMR_SDA10_PBI1_A6, \ - }, \ - { .size = 128 << 20, \ - .or1 = ORxS_ROWST_PBI1_A5, \ - .psdmr = PSDMR_SDAM_A16_IS_A5 | PSDMR_SDA10_PBI1_A7, \ - }, \ -} -#endif /* defined(CONFIG_MGCOGE3NE) */ - -/* include further common stuff for all keymile 82xx boards */ -/* - * Select serial console configuration - * - * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - */ -#define CONFIG_CONS_ON_SMC /* Console is on SMC */ -#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ -#undef CONFIG_CONS_NONE /* It's not on external UART */ -#define CONFIG_CONS_INDEX 2 /* SMC2 is used for console */ -#define CONFIG_SYS_SMC_RXBUFLEN 128 -#define CONFIG_SYS_MAXIDLE 10 - -/* - * Select ethernet configuration - * - * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, - * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for - * SCC, 1-3 for FCC) - * - * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CONFIG_CMD_NET - * must be unset. - */ -#define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */ -#undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */ -#undef CONFIG_ETHER_NONE /* No external Ethernet */ - -#define CONFIG_ETHER_INDEX 4 -#define CONFIG_HAS_ETH0 -#define CONFIG_SYS_SCC_TOUT_LOOP 10000000 - -#define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8) - -#ifndef CONFIG_8260_CLKIN -#define CONFIG_8260_CLKIN 66000000 /* in Hz */ -#endif - -#define BOOTFLASH_START 0xFE000000 - -#define CONFIG_KM_CONSOLE_TTY "ttyCPM0" - -#define MTDPARTS_DEFAULT "mtdparts=" \ - "app:" \ - "768k(u-boot)," \ - "128k(env)," \ - "128k(envred)," \ - "3072k(free)," \ - "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ")" - -/* - * Default environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_BOARD_EXTRA_ENV \ - CONFIG_KM_DEF_ENV \ - "unlock=yes\0" \ - "newenv=" \ - "prot off 0xFE0C0000 +0x40000 && " \ - "era 0xFE0C0000 +0x40000\0" \ - "arch=ppc_82xx\0" \ - "" - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (768 << 10) - -#define CONFIG_ENV_IS_IN_FLASH - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/* enable I2C and select the hardware/software driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_SYS_NUM_I2C_BUSES 3 -#define CONFIG_SYS_I2C_MAX_HOPS 1 -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SOFT_SPEED -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F -#define CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \ - {0, {{I2C_MUX_PCA9542, 0x70, 0} } }, \ - {0, {{I2C_MUX_PCA9542, 0x70, 1} } } } - -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ -#define CONFIG_KM_I2C_ABORT - -/* - * Software (bit-bang) I2C driver configuration - */ - -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) do { \ - if (bit) \ - iop->pdat |= 0x00010000; \ - else \ - iop->pdat &= ~0x00010000; \ - } while (0) -#define I2C_SCL(bit) do { \ - if (bit) \ - iop->pdat |= 0x00020000; \ - else \ - iop->pdat &= ~0x00020000; \ - } while (0) -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#ifndef __ASSEMBLY__ -void set_sda(int state); -void set_scl(int state); -int get_sda(void); -int get_scl(void); -#endif - -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 - -#define CONFIG_SYS_IMMR 0xF0000000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* used size in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* Hard reset configuration word */ -#define CONFIG_SYS_HRCW_MASTER 0x0604b211 - -/* No slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -/* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) - -#define CONFIG_SYS_HID2 0 - -#define CONFIG_SYS_SIUMCR 0x4020c200 -#define CONFIG_SYS_SYPCR 0xFFFFFF83 -#define CONFIG_SYS_BCR 0x10000000 -#define CONFIG_SYS_SCCR (SCCR_PCI_MODE | SCCR_PCI_MODCK) - -/* - *----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#define CONFIG_SYS_RMR 0 - -/* - *----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/* - *----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/* - *----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -/* - * Init Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 8 bit FLASH - * 1 60x SDRAM 32 bit SDRAM - * 3 60x GPCM 8 bit GPIO/PIGGY - * 5 60x GPCM 16 bit CFG-Flash - * - */ -/* Bank 0 - FLASH - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV2 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX) - -#define CONFIG_SYS_MPTPR 0x1800 - -/* - *----------------------------------------------------------------------------- - * Address for Mode Register Set (MRS) command - *----------------------------------------------------------------------------- - */ -#define CONFIG_SYS_MRS_OFFS 0x00000110 -#define CONFIG_SYS_PSRT 0x0e - -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_SDRAM_P |\ - BRx_V) - -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1 - -/* - * UPIO FPGA (GPIO/PIGGY) on CS3 initialization values - */ -#define CONFIG_SYS_KMBEC_FPGA_BASE 0x30000000 -#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 - -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_KMBEC_FPGA_BASE & BRx_BA_MSK) |\ - BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) - -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) |\ - ORxG_CSNT | ORxG_ACS_DIV2 |\ - ORxG_SCY_3_CLK | ORxG_TRLX) - -/* - * BFTICU board FPGA on CS4 initialization values - */ -#define CONFIG_SYS_FPGA_BASE 0x40000000 -#define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/ - -#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_FPGA_BASE & BRx_BA_MSK) |\ - BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) - -#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FPGA_SIZE << 10) |\ - ORxG_CSNT | ORxG_ACS_DIV2 |\ - ORxG_SCY_3_CLK | ORxG_TRLX) - -/* - * CFG-Flash on CS5 initialization values - */ -#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\ - BRx_PS_16 | BRx_MS_GPCM_P | BRx_V) - -#define CONFIG_SYS_OR5_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE_1 + \ - CONFIG_SYS_FLASH_SIZE_2) |\ - ORxG_CSNT | ORxG_ACS_DIV2 |\ - ORxG_SCY_5_CLK | ORxG_TRLX) - -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ - -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc/cpm/serial@11a90" - -#endif /* __CONFIG_H */ diff --git a/include/i2c.h b/include/i2c.h index fe3dca0..695cb76 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -660,9 +660,7 @@ extern struct i2c_bus_hose i2c_bus[]; #endif
#ifndef I2C_SOFT_DECLARATIONS -# if defined(CONFIG_MPC8260) -# define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT); -# elif (defined(CONFIG_AT91RM9200) || \ +# if (defined(CONFIG_AT91RM9200) || \ defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) || \ defined(CONFIG_AT91SAM9263)) # define I2C_SOFT_DECLARATIONS at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; diff --git a/include/mpc8260.h b/include/mpc8260.h deleted file mode 100644 index 75f1b0c..0000000 --- a/include/mpc8260.h +++ /dev/null @@ -1,903 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * mpc8260.h - * - * MPC8255 / MPC8260 specific definitions - */ - -#ifndef __MPC8260_H__ -#define __MPC8260_H__ - -#ifdef CONFIG_MPC8255 -#define CPU_ID_STR "MPC8255" -#endif -#ifndef CPU_ID_STR -#if defined(CONFIG_MPC8272_FAMILY) -#ifdef CONFIG_MPC8247 -#define CPU_ID_STR "MPC8247" -#else -#define CPU_ID_STR "MPC8272" -#endif -#else -#define CPU_ID_STR "MPC8260" -#endif -#endif /* !CPU_ID_STR */ - -/*----------------------------------------------------------------------- - * Exception offsets (PowerPC standard) - */ -#define EXC_OFF_SYS_RESET 0x0100 /* System reset */ -#define _START_OFFSET EXC_OFF_SYS_RESET - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration Register 4-25 - */ -#define BCR_EBM 0x80000000 /* External Bus Mode */ -#define BCR_APD_MSK 0x70000000 /* Address Phase Delay Mask */ -#define BCR_L2C 0x08000000 /* Secondary Cache Controller */ -#define BCR_L2D_MSK 0x07000000 /* L2 Cache Hit Delay Mask */ -#define BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */ -#define BCR_EAV 0x00400000 /* Enable Address Visibility */ -#define BCR_ETM 0x00080000 /* Compatibility Mode Enable */ -#define BCR_LETM 0x00040000 /* LocalBus Compatibility Mode Enable*/ -#define BCR_EPAR 0x00020000 /* Even Parity */ -#define BCR_LEPAR 0x00010000 /* Local Bus Even Parity */ -#define BCR_NPQM0 0x00008000 /* Non PowerQUICC-II Master 0 */ -#define BCR_NPQM1 0x00004000 /* Non PowerQUICC-II Master 1 */ -#define BCR_NPQM2 0x00002000 /* Non PowerQUICC-II Master 2 */ -#define BCR_EXDD 0x00000400 /* External Master Delay Disable*/ -#define BCR_ISPS 0x00000010 /* Internal Space Port Size */ - - -/*----------------------------------------------------------------------- - * PPC_ACR - 60x Bus Arbiter Configuration Register 4-28 - */ -#define PPC_ACR_DBGD 0x20 /* Data Bus Grant Delay */ -#define PPC_ACR_EARB 0x10 /* External Arbitration */ -#define PPC_ACR_PRKM_MSK 0x0f /* Parking Master */ - -#define PPC_ACR_PRKM_CPMH 0x00 /* CPM high request level */ -#define PPC_ACR_PRKM_CPMM 0x01 /* CPM middle request level */ -#define PPC_ACR_PRKM_CPML 0x02 /* CPM low request level */ -#define PPC_ACR_PRKM_CORE 0x06 /* Internal Core */ -#define PPC_ACR_PRKM_EXT1 0x07 /* External Master 1 */ -#define PPC_ACR_PRKM_EXT2 0x08 /* External Master 2 */ -#define PPC_ACR_PRKM_EXT3 0x09 /* External Master 3 */ - -/*----------------------------------------------------------------------- - * PPC_ALRH/PPC_ALRL - 60x Bus Arbitration-Level Registers 4-28 - */ -#define PPC_ALRH_PF0_MSK 0xf0000000 /* Priority Field 0 Mask */ -#define PPC_ALRH_PF1_MSK 0x0f000000 /* Priority Field 1 Mask */ -#define PPC_ALRH_PF2_MSK 0x00f00000 /* Priority Field 2 Mask */ -#define PPC_ALRH_PF3_MSK 0x000f0000 /* Priority Field 3 Mask */ -#define PPC_ALRH_PF4_MSK 0x0000f000 /* Priority Field 4 Mask */ -#define PPC_ALRH_PF5_MSK 0x00000f00 /* Priority Field 5 Mask */ -#define PPC_ALRH_PF6_MSK 0x000000f0 /* Priority Field 6 Mask */ -#define PPC_ALRH_PF7_MSK 0x0000000f /* Priority Field 7 Mask */ -#define PPC_ALRL_PF8_MSK 0xf0000000 /* Priority Field 8 Mask */ -#define PPC_ALRL_PF9_MSK 0x0f000000 /* Priority Field 9 Mask */ -#define PPC_ALRL_PF10_MSK 0x00f00000 /* Priority Field 10 Mask */ -#define PPC_ALRL_PF11_MSK 0x000f0000 /* Priority Field 11 Mask */ -#define PPC_ALRL_PF12_MSK 0x0000f000 /* Priority Field 12 Mask */ -#define PPC_ALRL_PF13_MSK 0x00000f00 /* Priority Field 13 Mask */ -#define PPC_ALRL_PF14_MSK 0x000000f0 /* Priority Field 14 Mask */ -#define PPC_ALRL_PF15_MSK 0x0000000f /* Priority Field 15 Mask */ - -/*----------------------------------------------------------------------- - * LCL_ACR - Local Bus Arbiter Configuration Register 4-29 - */ -#define LCL_ACR_DBGD 0x20 /* Data Bus Grant Delay */ -#define LCL_ACR_PRKM_MSK 0x0f /* Parking Master */ - -#define LCL_ACR_PRKM_CPMH 0x00 /* CPM high request level */ -#define LCL_ACR_PRKM_CPMM 0x01 /* CPM middle request level */ -#define LCL_ACR_PRKM_CPML 0x02 /* CPM low request level */ -#define LCL_ACR_PRKM_HOST 0x03 /* Host Bridge */ - -/*----------------------------------------------------------------------- - * LCL_ALRH/LCL_ALRL - Local Bus Arbitration Level Registers 4-30 - */ -#define LCL_ALRH_PF0_MSK 0xf0000000 /* Priority Field 0 Mask */ -#define LCL_ALRH_PF1_MSK 0x0f000000 /* Priority Field 1 Mask */ -#define LCL_ALRH_PF2_MSK 0x00f00000 /* Priority Field 2 Mask */ -#define LCL_ALRH_PF3_MSK 0x000f0000 /* Priority Field 3 Mask */ -#define LCL_ALRH_PF4_MSK 0x0000f000 /* Priority Field 4 Mask */ -#define LCL_ALRH_PF5_MSK 0x00000f00 /* Priority Field 5 Mask */ -#define LCL_ALRH_PF6_MSK 0x000000f0 /* Priority Field 6 Mask */ -#define LCL_ALRH_PF7_MSK 0x0000000f /* Priority Field 7 Mask */ -#define LCL_ALRL_PF8_MSK 0xf0000000 /* Priority Field 8 Mask */ -#define LCL_ALRL_PF9_MSK 0x0f000000 /* Priority Field 9 Mask */ -#define LCL_ALRL_PF10_MSK 0x00f00000 /* Priority Field 10 Mask */ -#define LCL_ALRL_PF11_MSK 0x000f0000 /* Priority Field 11 Mask */ -#define LCL_ALRL_PF12_MSK 0x0000f000 /* Priority Field 12 Mask */ -#define LCL_ALRL_PF13_MSK 0x00000f00 /* Priority Field 13 Mask */ -#define LCL_ALRL_PF14_MSK 0x000000f0 /* Priority Field 14 Mask */ -#define LCL_ALRL_PF15_MSK 0x0000000f /* Priority Field 15 Mask */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration Register 4-31 - */ -#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ -#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ -#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ -#define SIUMCR_CDIS 0x10000000 /* Core Disable */ -#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ -#define SIUMCR_DPPC01 0x04000000 /* - " - */ -#define SIUMCR_DPPC10 0x08000000 /* - " - */ -#define SIUMCR_DPPC11 0x0c000000 /* - " - */ -#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ -#define SIUMCR_L2CPC01 0x01000000 /* - " - */ -#define SIUMCR_L2CPC10 0x02000000 /* - " - */ -#define SIUMCR_L2CPC11 0x03000000 /* - " - */ -#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ -#define SIUMCR_LBPC01 0x00400000 /* - " - */ -#define SIUMCR_LBPC10 0x00800000 /* - " - */ -#define SIUMCR_LBPC11 0x00c00000 /* - " - */ -#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ -#define SIUMCR_APPC01 0x00100000 /* - " - */ -#define SIUMCR_APPC10 0x00200000 /* - " - */ -#define SIUMCR_APPC11 0x00300000 /* - " - */ -#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ -#define SIUMCR_CS10PC01 0x00040000 /* - " - */ -#define SIUMCR_CS10PC10 0x00080000 /* - " - */ -#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ -#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ -#define SIUMCR_BCTLC01 0x00010000 /* - " - */ -#define SIUMCR_BCTLC10 0x00020000 /* - " - */ -#define SIUMCR_BCTLC11 0x00030000 /* - " - */ -#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ -#define SIUMCR_MMR01 0x00004000 /* - " - */ -#define SIUMCR_MMR10 0x00008000 /* - " - */ -#define SIUMCR_MMR11 0x0000c000 /* - " - */ -#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ -#define SIUMCR_ABE 0x00000400 /* Address output buffer impedance*/ - -/*----------------------------------------------------------------------- - * IMMR - Internal Memory Map Register 4-34 - */ -#define IMMR_ISB_MSK 0xfffe0000 /* Internal Space base */ -#define IMMR_PARTNUM_MSK 0x0000ff00 /* Part number */ -#define IMMR_MASKNUM_MSK 0x000000ff /* Mask number */ - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control Register 4-35 - */ -#define SYPCR_SWTC 0xffff0000 /* Software Watchdog Timer Count*/ -#define SYPCR_BMT 0x0000ff00 /* Bus Monitor Timing */ -#define SYPCR_PBME 0x00000080 /* 60x Bus Monitor Enable */ -#define SYPCR_LBME 0x00000040 /* Local Bus Monitor Enable */ -#define SYPCR_SWE 0x00000004 /* Software Watchdog Enable */ -#define SYPCR_SWRI 0x00000002 /* Software Watchdog Reset/Int Select*/ -#define SYPCR_SWP 0x00000001 /* Software Watchdog Prescale */ - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control Register 4-40 - */ -#define TMCNTSC_SEC 0x0080 /* Once Per Second Interrupt */ -#define TMCNTSC_ALR 0x0040 /* Alarm Interrupt */ -#define TMCNTSC_SIE 0x0008 /* Second Interrupt Enable */ -#define TMCNTSC_ALE 0x0004 /* Alarm Interrupt Enable */ -#define TMCNTSC_TCF 0x0002 /* Time Counter Frequency */ -#define TMCNTSC_TCE 0x0001 /* Time Counter Enable */ - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control Register 4-42 - */ -#if 0 /* already defined in asm/immap_8260.h */ -#define PISCR_PS 0x0080 /* Periodic Interrupt Status */ -#define PISCR_PIE 0x0004 /* Periodic Interrupt Enable */ -#define PISCR_PTF 0x0002 /* Periodic Timer Frequency */ -#define PISCR_PTE 0x0001 /* Periodic Timer Enable */ -#endif - -/*----------------------------------------------------------------------- - * RSR - Reset Status Register 5-4 - */ -#define RSR_JTRS 0x00000020 /* JTAG Reset Status */ -#define RSR_CSRS 0x00000010 /* Check Stop Reset Status */ -#define RSR_SWRS 0x00000008 /* Software Watchdog Reset Status*/ -#define RSR_BMRS 0x00000004 /* Bus Monitor Reset Status */ -#define RSR_ESRS 0x00000002 /* External Soft Reset Status */ -#define RSR_EHRS 0x00000001 /* External Hard Reset Status */ - -#define RSR_ALLBITS (RSR_JTRS|RSR_CSRS|RSR_SWRS|RSR_BMRS|RSR_ESRS|RSR_EHRS) - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - */ -#define RMR_CSRE 0x00000001 /* Checkstop Reset Enable */ - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Word 5-8 - */ -#define HRCW_EARB 0x80000000 /* External Arbitration */ -#define HRCW_EXMC 0x40000000 /* External Memory Controller */ -#define HRCW_CDIS 0x20000000 /* Core Disable */ -#define HRCW_EBM 0x10000000 /* External Bus Mode */ -#define HRCW_BPS00 0x00000000 /* Boot Port Size */ -#define HRCW_BPS01 0x04000000 /* - " - */ -#define HRCW_BPS10 0x08000000 /* - " - */ -#define HRCW_BPS11 0x0c000000 /* - " - */ -#define HRCW_CIP 0x02000000 /* Core Initial Prefix */ -#define HRCW_ISPS 0x01000000 /* Internal Space Port Size */ -#define HRCW_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ -#define HRCW_L2CPC01 0x00400000 /* - " - */ -#define HRCW_L2CPC10 0x00800000 /* - " - */ -#define HRCW_L2CPC11 0x00c00000 /* - " - */ -#define HRCW_DPPC00 0x00000000 /* Data Parity Pin Configuration*/ -#define HRCW_DPPC01 0x00100000 /* - " - */ -#define HRCW_DPPC10 0x00200000 /* - " - */ -#define HRCW_DPPC11 0x00300000 /* - " - */ -#define HRCW_reserved1 0x00080000 /* reserved */ -#define HRCW_ISB000 0x00000000 /* Initial Internal Space Base */ -#define HRCW_ISB001 0x00010000 /* - " - */ -#define HRCW_ISB010 0x00020000 /* - " - */ -#define HRCW_ISB011 0x00030000 /* - " - */ -#define HRCW_ISB100 0x00040000 /* - " - */ -#define HRCW_ISB101 0x00050000 /* - " - */ -#define HRCW_ISB110 0x00060000 /* - " - */ -#define HRCW_ISB111 0x00070000 /* - " - */ -#define HRCW_BMS 0x00008000 /* Boot Memory Space */ -#define HRCW_BBD 0x00004000 /* Bus Busy Disable */ -#define HRCW_MMR00 0x00000000 /* Mask Masters Requests */ -#define HRCW_MMR01 0x00001000 /* - " - */ -#define HRCW_MMR10 0x00002000 /* - " - */ -#define HRCW_MMR11 0x00003000 /* - " - */ -#define HRCW_LBPC00 0x00000000 /* Local Bus Pin Configuration */ -#define HRCW_LBPC01 0x00000400 /* - " - */ -#define HRCW_LBPC10 0x00000800 /* - " - */ -#define HRCW_LBPC11 0x00000c00 /* - " - */ -#define HRCW_APPC00 0x00000000 /* Address Parity Pin Configuration*/ -#define HRCW_APPC01 0x00000100 /* - " - */ -#define HRCW_APPC10 0x00000200 /* - " - */ -#define HRCW_APPC11 0x00000300 /* - " - */ -#define HRCW_CS10PC00 0x00000000 /* CS10 Pin Configuration */ -#define HRCW_CS10PC01 0x00000040 /* - " - */ -#define HRCW_CS10PC10 0x00000080 /* - " - */ -#define HRCW_CS10PC11 0x000000c0 /* - " - */ -#define HRCW_MODCK_H0000 0x00000000 /* High-order bits of MODCK Bus */ -#define HRCW_MODCK_H0001 0x00000001 /* - " - */ -#define HRCW_MODCK_H0010 0x00000002 /* - " - */ -#define HRCW_MODCK_H0011 0x00000003 /* - " - */ -#define HRCW_MODCK_H0100 0x00000004 /* - " - */ -#define HRCW_MODCK_H0101 0x00000005 /* - " - */ -#define HRCW_MODCK_H0110 0x00000006 /* - " - */ -#define HRCW_MODCK_H0111 0x00000007 /* - " - */ -#define HRCW_MODCK_H1000 0x00000008 /* - " - */ -#define HRCW_MODCK_H1001 0x00000009 /* - " - */ -#define HRCW_MODCK_H1010 0x0000000a /* - " - */ -#define HRCW_MODCK_H1011 0x0000000b /* - " - */ -#define HRCW_MODCK_H1100 0x0000000c /* - " - */ -#define HRCW_MODCK_H1101 0x0000000d /* - " - */ -#define HRCW_MODCK_H1110 0x0000000e /* - " - */ -#define HRCW_MODCK_H1111 0x0000000f /* - " - */ - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control Register 9-8 - */ -#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ -#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ -#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ -#define SCCR_PCIDF_SHIFT 3 -#define SCCR_CLPD 0x00000004 /* CPM Low Power Disable */ -#define SCCR_DFBRG_MSK 0x00000003 /* Division factor of BRGCLK Mask */ -#define SCCR_DFBRG_SHIFT 0 - -#define SCCR_DFBRG00 0x00000000 /* BRGCLK division by 4 */ -#define SCCR_DFBRG01 0x00000001 /* BRGCLK division by 16 (normal op.)*/ -#define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */ -#define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 128 */ - -/*----------------------------------------------------------------------- - * SCMR - System Clock Mode Register 9-9 - */ -#define SCMR_CORECNF_MSK 0x1f000000 /* Core Configuration Mask */ -#define SCMR_CORECNF_SHIFT 24 -#define SCMR_BUSDF_MSK 0x00f00000 /* 60x Bus Division Factor Mask */ -#define SCMR_BUSDF_SHIFT 20 -#define SCMR_CPMDF_MSK 0x000f0000 /* CPM Division Factor Mask */ -#define SCMR_CPMDF_SHIFT 16 -#define SCMR_PLLDF 0x00001000 /* PLL Pre-divider Value */ -#define SCMR_PLLMF_MSK 0x00000fff /* PLL Multiplication Factor Mask*/ -#define SCMR_PLLMF_MSKH7 0x0000000f /* for HiP7 processors */ -#define SCMR_PLLMF_SHIFT 0 - - -/*----------------------------------------------------------------------- - * MxMR - Machine A/B/C Mode Registers 10-13 - */ -#define MxMR_BSEL 0x80000000 /* Bus Select */ -#define MxMR_RFEN 0x40000000 /* Refresh Enable */ -#define MxMR_OP_MSK 0x30000000 /* Command Opcode Mask */ -#define MxMR_AMx_MSK 0x07000000 /* Addess Multiplex Size Mask */ -#define MxMR_DSx_MSK 0x00c00000 /* Disable Timer Period Mask */ -#define MxMR_G0CLx_MSK 0x00380000 /* General Line 0 Control Mask */ -#define MxMR_GPL_x4DIS 0x00040000 /* GPL_A4 Ouput Line Disable */ -#define MxMR_RLFx_MSK 0x0003c000 /* Read Loop Field Mask */ -#define MxMR_WLFx_MSK 0x00003c00 /* Write Loop Field Mask */ -#define MxMR_TLFx_MSK 0x000003c0 /* Refresh Loop Field Mask */ -#define MxMR_MAD_MSK 0x0000003f /* Machine Address Mask */ - -#define MxMR_OP_NORM 0x00000000 /* Normal Operation */ -#define MxMR_OP_WARR 0x10000000 /* Write to Array */ -#define MxMR_OP_RARR 0x20000000 /* Read from Array */ -#define MxMR_OP_RUNP 0x30000000 /* Run Pattern */ - -#define MxMR_AMx_TYPE_0 0x00000000 /* Addess Multiplexing Type 0 */ -#define MxMR_AMx_TYPE_1 0x01000000 /* Addess Multiplexing Type 1 */ -#define MxMR_AMx_TYPE_2 0x02000000 /* Addess Multiplexing Type 2 */ -#define MxMR_AMx_TYPE_3 0x03000000 /* Addess Multiplexing Type 3 */ -#define MxMR_AMx_TYPE_4 0x04000000 /* Addess Multiplexing Type 4 */ -#define MxMR_AMx_TYPE_5 0x05000000 /* Addess Multiplexing Type 5 */ - -#define MxMR_DSx_1_CYCL 0x00000000 /* 1 cycle Disable Period */ -#define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */ -#define MxMR_DSx_3_CYCL 0x00800000 /* 3 cycle Disable Period */ -#define MxMR_DSx_4_CYCL 0x00c00000 /* 4 cycle Disable Period */ - -#define MxMR_G0CLx_A12 0x00000000 /* General Line 0 : A12 */ -#define MxMR_G0CLx_A11 0x00080000 /* General Line 0 : A11 */ -#define MxMR_G0CLx_A10 0x00100000 /* General Line 0 : A10 */ -#define MxMR_G0CLx_A9 0x00180000 /* General Line 0 : A9 */ -#define MxMR_G0CLx_A8 0x00200000 /* General Line 0 : A8 */ -#define MxMR_G0CLx_A7 0x00280000 /* General Line 0 : A7 */ -#define MxMR_G0CLx_A6 0x00300000 /* General Line 0 : A6 */ -#define MxMR_G0CLx_A5 0x00380000 /* General Line 0 : A5 */ - -#define MxMR_RLFx_1X 0x00004000 /* Read Loop is executed 1 time */ -#define MxMR_RLFx_2X 0x00008000 /* Read Loop is executed 2 times*/ -#define MxMR_RLFx_3X 0x0000c000 /* Read Loop is executed 3 times*/ -#define MxMR_RLFx_4X 0x00010000 /* Read Loop is executed 4 times*/ -#define MxMR_RLFx_5X 0x00014000 /* Read Loop is executed 5 times*/ -#define MxMR_RLFx_6X 0x00018000 /* Read Loop is executed 6 times*/ -#define MxMR_RLFx_7X 0x0001c000 /* Read Loop is executed 7 times*/ -#define MxMR_RLFx_8X 0x00020000 /* Read Loop is executed 8 times*/ -#define MxMR_RLFx_9X 0x00024000 /* Read Loop is executed 9 times*/ -#define MxMR_RLFx_10X 0x00028000 /* Read Loop is executed 10 times*/ -#define MxMR_RLFx_11X 0x0002c000 /* Read Loop is executed 11 times*/ -#define MxMR_RLFx_12X 0x00030000 /* Read Loop is executed 12 times*/ -#define MxMR_RLFx_13X 0x00034000 /* Read Loop is executed 13 times*/ -#define MxMR_RLFx_14X 0x00038000 /* Read Loop is executed 14 times*/ -#define MxMR_RLFx_15X 0x0003c000 /* Read Loop is executed 15 times*/ -#define MxMR_RLFx_16X 0x00000000 /* Read Loop is executed 16 times*/ - -#define MxMR_WLFx_1X 0x00000400 /* Write Loop is executed 1 time*/ -#define MxMR_WLFx_2X 0x00000800 /* Write Loop is executed 2 times*/ -#define MxMR_WLFx_3X 0x00000c00 /* Write Loop is executed 3 times*/ -#define MxMR_WLFx_4X 0x00001000 /* Write Loop is executed 4 times*/ -#define MxMR_WLFx_5X 0x00001400 /* Write Loop is executed 5 times*/ -#define MxMR_WLFx_6X 0x00001800 /* Write Loop is executed 6 times*/ -#define MxMR_WLFx_7X 0x00001c00 /* Write Loop is executed 7 times*/ -#define MxMR_WLFx_8X 0x00002000 /* Write Loop is executed 8 times*/ -#define MxMR_WLFx_9X 0x00002400 /* Write Loop is executed 9 times*/ -#define MxMR_WLFx_10X 0x00002800 /* Write Loop is executed 10 times*/ -#define MxMR_WLFx_11X 0x00002c00 /* Write Loop is executed 11 times*/ -#define MxMR_WLFx_12X 0x00003000 /* Write Loop is executed 12 times*/ -#define MxMR_WLFx_13X 0x00003400 /* Write Loop is executed 13 times*/ -#define MxMR_WLFx_14X 0x00003800 /* Write Loop is executed 14 times*/ -#define MxMR_WLFx_15X 0x00003c00 /* Write Loop is executed 15 times*/ -#define MxMR_WLFx_16X 0x00000000 /* Write Loop is executed 16 times*/ - -#define MxMR_TLFx_1X 0x00000040 /* Timer Loop is executed 1 time*/ -#define MxMR_TLFx_2X 0x00000080 /* Timer Loop is executed 2 times*/ -#define MxMR_TLFx_3X 0x000000c0 /* Timer Loop is executed 3 times*/ -#define MxMR_TLFx_4X 0x00000100 /* Timer Loop is executed 4 times*/ -#define MxMR_TLFx_5X 0x00000140 /* Timer Loop is executed 5 times*/ -#define MxMR_TLFx_6X 0x00000180 /* Timer Loop is executed 6 times*/ -#define MxMR_TLFx_7X 0x000001c0 /* Timer Loop is executed 7 times*/ -#define MxMR_TLFx_8X 0x00000200 /* Timer Loop is executed 8 times*/ -#define MxMR_TLFx_9X 0x00000240 /* Timer Loop is executed 9 times*/ -#define MxMR_TLFx_10X 0x00000280 /* Timer Loop is executed 10 times*/ -#define MxMR_TLFx_11X 0x000002c0 /* Timer Loop is executed 11 times*/ -#define MxMR_TLFx_12X 0x00000300 /* Timer Loop is executed 12 times*/ -#define MxMR_TLFx_13X 0x00000340 /* Timer Loop is executed 13 times*/ -#define MxMR_TLFx_14X 0x00000380 /* Timer Loop is executed 14 times*/ -#define MxMR_TLFx_15X 0x000003c0 /* Timer Loop is executed 15 times*/ -#define MxMR_TLFx_16X 0x00000000 /* Timer Loop is executed 16 times*/ - - -/*----------------------------------------------------------------------- - * BRx - Memory Controller: Base Register 10-14 - */ -#define BRx_BA_MSK 0xffff8000 /* Base Address Mask */ -#define BRx_PS_MSK 0x00001800 /* Port Size Mask */ -#define BRx_DECC_MSK 0x00000600 /* Data Error Correct+Check Mask*/ -#define BRx_WP 0x00000100 /* Write Protect */ -#define BRx_MS_MSK 0x000000e0 /* Machine Select Mask */ -#define BRx_EMEMC 0x00000010 /* External MEMC Enable */ -#define BRx_ATOM_MSK 0x0000000c /* Atomic Operation Mask */ -#define BRx_DR 0x00000002 /* Data Pipelining */ -#define BRx_V 0x00000001 /* Bank Valid */ - -#define BRx_PS_64 0x00000000 /* 64 bit port size (60x bus only)*/ -#define BRx_PS_8 0x00000800 /* 8 bit port size */ -#define BRx_PS_16 0x00001000 /* 16 bit port size */ -#define BRx_PS_32 0x00001800 /* 32 bit port size */ - -#define BRx_DECC_NONE 0x00000000 /* Data Errors Checking Disabled*/ -#define BRx_DECC_NORMAL 0x00000200 /* Normal Parity Checking */ -#define BRx_DECC_RMWPC 0x00000400 /* Read-Modify-Write Parity Checking*/ -#define BRx_DECC_ECC 0x00000600 /* ECC Correction and Checking */ - -#define BRx_MS_GPCM_P 0x00000000 /* G.P.C.M. 60x Bus Machine Select*/ -#define BRx_MS_GPCM_L 0x00000020 /* G.P.C.M. Local Bus Machine Select*/ -#define BRx_MS_SDRAM_P 0x00000040 /* SDRAM 60x Bus Machine Select */ -#define BRx_MS_SDRAM_L 0x00000060 /* SDRAM Local Bus Machine Select*/ -#define BRx_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ -#define BRx_MS_UPMB 0x000000a0 /* U.P.M.B Machine Select */ -#define BRx_MS_UPMC 0x000000c0 /* U.P.M.C Machine Select */ - -#define BRx_ATOM_RAWA 0x00000004 /* Read-After-Write-Atomic */ -#define BRx_ATOM_WARA 0x00000008 /* Write-After-Read-Atomic */ - -/*----------------------------------------------------------------------- - * ORx - Memory Controller: Option Register - SDRAM Mode 10-16 - */ -#define ORxS_SDAM_MSK 0xfff00000 /* SDRAM Address Mask Mask */ -#define ORxS_LSDAM_MSK 0x000f8000 /* Lower SDRAM Address Mask Mask*/ -#define ORxS_BPD_MSK 0x00006000 /* Banks Per Device Mask */ -#define ORxS_ROWST_MSK 0x00001e00 /* Row Start Address Bit Mask */ -#define ORxS_NUMR_MSK 0x000001c0 /* Number of Row Addr Lines Mask*/ -#define ORxS_PMSEL 0x00000020 /* Page Mode Select */ -#define ORxS_IBID 0x00000010 /* Internal Bank Interleaving Disable*/ - -#define ORxS_BPD_2 0x00000000 /* 2 Banks Per Device */ -#define ORxS_BPD_4 0x00002000 /* 4 Banks Per Device */ -#define ORxS_BPD_8 0x00004000 /* 8 Banks Per Device */ - -/* ROWST values for xSDMR[PBI] = 0 */ -#define ORxS_ROWST_PBI0_A7 0x00000400 /* Row Start Address Bit is A7 */ -#define ORxS_ROWST_PBI0_A8 0x00000800 /* Row Start Address Bit is A8 */ -#define ORxS_ROWST_PBI0_A9 0x00000c00 /* Row Start Address Bit is A9 */ -#define ORxS_ROWST_PBI0_A10 0x00001000 /* Row Start Address Bit is A10 */ -#define ORxS_ROWST_PBI0_A11 0x00001400 /* Row Start Address Bit is A11 */ -#define ORxS_ROWST_PBI0_A12 0x00001800 /* Row Start Address Bit is A12 */ -#define ORxS_ROWST_PBI0_A13 0x00001c00 /* Row Start Address Bit is A13 */ - -/* ROWST values for xSDMR[PBI] = 1 */ -#define ORxS_ROWST_PBI1_A0 0x00000000 /* Row Start Address Bit is A0 */ -#define ORxS_ROWST_PBI1_A1 0x00000200 /* Row Start Address Bit is A1 */ -#define ORxS_ROWST_PBI1_A2 0x00000400 /* Row Start Address Bit is A2 */ -#define ORxS_ROWST_PBI1_A3 0x00000600 /* Row Start Address Bit is A3 */ -#define ORxS_ROWST_PBI1_A4 0x00000800 /* Row Start Address Bit is A4 */ -#define ORxS_ROWST_PBI1_A5 0x00000a00 /* Row Start Address Bit is A5 */ -#define ORxS_ROWST_PBI1_A6 0x00000c00 /* Row Start Address Bit is A6 */ -#define ORxS_ROWST_PBI1_A7 0x00000e00 /* Row Start Address Bit is A7 */ -#define ORxS_ROWST_PBI1_A8 0x00001000 /* Row Start Address Bit is A8 */ -#define ORxS_ROWST_PBI1_A9 0x00001200 /* Row Start Address Bit is A9 */ -#define ORxS_ROWST_PBI1_A10 0x00001400 /* Row Start Address Bit is A10 */ -#define ORxS_ROWST_PBI1_A11 0x00001600 /* Row Start Address Bit is A11 */ -#define ORxS_ROWST_PBI1_A12 0x00001800 /* Row Start Address Bit is A12 */ - -#define ORxS_NUMR_9 0x00000000 /* 9 Row Address Lines */ -#define ORxS_NUMR_10 0x00000040 /* 10 Row Address Lines */ -#define ORxS_NUMR_11 0x00000080 /* 11 Row Address Lines */ -#define ORxS_NUMR_12 0x000000c0 /* 12 Row Address Lines */ -#define ORxS_NUMR_13 0x00000100 /* 13 Row Address Lines */ -#define ORxS_NUMR_14 0x00000140 /* 14 Row Address Lines */ -#define ORxS_NUMR_15 0x00000180 /* 15 Row Address Lines */ -#define ORxS_NUMR_16 0x000001c0 /* 16 Row Address Lines */ - -/* helper to determine the AM for a given size (SDRAM mode) */ -#define ORxS_SIZE_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */ - -/*----------------------------------------------------------------------- - * ORx - Memory Controller: Option Register - GPCM Mode 10-18 - */ -#define ORxG_AM_MSK 0xffff8000 /* Address Mask Mask */ -#define ORxG_BCTLD 0x00001000 /* Data Buffer Control Disable */ -#define ORxG_CSNT 0x00000800 /* Chip Select Negation Time */ -#define ORxG_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask*/ -#define ORxG_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */ -#define ORxG_SETA 0x00000008 /* External Access Termination */ -#define ORxG_TRLX 0x00000004 /* Timing Relaxed */ -#define ORxG_EHTR 0x00000002 /* Extended Hold Time on Read */ - -#define ORxG_ACS_DIV1 0x00000000 /* CS is output at the same time*/ -#define ORxG_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later*/ -#define ORxG_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later*/ - -#define ORxG_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ -#define ORxG_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ -#define ORxG_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ -#define ORxG_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ -#define ORxG_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ -#define ORxG_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ -#define ORxG_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ -#define ORxG_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ -#define ORxG_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ -#define ORxG_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ -#define ORxG_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ -#define ORxG_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ -#define ORxG_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ -#define ORxG_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ -#define ORxG_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ -#define ORxG_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ - -/*----------------------------------------------------------------------- - * ORx - Memory Controller: Option Register - UPM Mode 10-20 - */ -#define ORxU_AM_MSK 0xffff8000 /* Address Mask Mask */ -#define ORxU_BCTLD 0x00001000 /* Data Buffer Control Disable */ -#define ORxU_BI 0x00000100 /* Burst Inhibit */ -#define ORxU_EHTR_MSK 0x00000006 /* Extended Hold Time on Read Mask*/ - -#define ORxU_EHTR_NORM 0x00000000 /* Normal Timing */ -#define ORxU_EHTR_1IDLE 0x00000002 /* One Idle Clock Cycle Inserted*/ -#define ORxU_EHTR_4IDLE 0x00000004 /* Four Idle Clock Cycles Inserted*/ -#define ORxU_EHTR_8IDLE 0x00000006 /* Eight Idle Clock Cycles Inserted*/ - - -/* helpers to convert values into an OR address mask (GPCM mode) */ -#define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */ -#define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20) - - -/*----------------------------------------------------------------------- - * PSDMR - 60x SDRAM Mode Register 10-21 - */ -#define PSDMR_PBI 0x80000000 /* Page-based Interleaving */ -#define PSDMR_RFEN 0x40000000 /* Refresh Enable */ -#define PSDMR_OP_MSK 0x38000000 /* SDRAM Operation Mask */ -#define PSDMR_SDAM_MSK 0x07000000 /* SDRAM Address Multiplex Mask */ -#define PSDMR_BSMA_MSK 0x00e00000 /* Bank Select Muxd Addr Line Mask*/ -#define PSDMR_SDA10_MSK 0x001c0000 /* A10 Control Mask */ -#define PSDMR_RFRC_MSK 0x00038000 /* Refresh Recovery Mask */ -#define PSDMR_PRETOACT_MSK 0x00007000 /* Precharge to Activate Intvl Mask*/ -#define PSDMR_ACTTORW_MSK 0x00000e00 /* Activate to Read/Write Intvl Mask*/ -#define PSDMR_BL 0x00000100 /* Burst Length */ -#define PSDMR_LDOTOPRE_MSK 0x000000c0 /* Last Data Out to Precharge Mask*/ -#define PSDMR_WRC_MSK 0x00000030 /* Write Recovery Time Mask */ -#define PSDMR_EAMUX 0x00000008 /* External Address Multiplexing*/ -#define PSDMR_BUFCMD 0x00000004 /* SDRAM ctl lines asrtd for 2 cycles*/ -#define PSDMR_CL_MSK 0x00000003 /* CAS Latency Mask */ - -#define PSDMR_OP_NORM 0x00000000 /* Normal Operation */ -#define PSDMR_OP_CBRR 0x08000000 /* CBR Refresh */ -#define PSDMR_OP_SELFR 0x10000000 /* Self Refresh */ -#define PSDMR_OP_MRW 0x18000000 /* Mode Register Write */ -#define PSDMR_OP_PREB 0x20000000 /* Precharge Bank */ -#define PSDMR_OP_PREA 0x28000000 /* Precharge All Banks */ -#define PSDMR_OP_ACTB 0x30000000 /* Activate Bank */ -#define PSDMR_OP_RW 0x38000000 /* Read/Write */ - -#define PSDMR_SDAM_A13_IS_A5 0x00000000 /* SDRAM Address Multiplex A13 is A5 */ -#define PSDMR_SDAM_A14_IS_A5 0x01000000 /* SDRAM Address Multiplex A14 is A5 */ -#define PSDMR_SDAM_A15_IS_A5 0x02000000 /* SDRAM Address Multiplex A15 is A5 */ -#define PSDMR_SDAM_A16_IS_A5 0x03000000 /* SDRAM Address Multiplex A16 is A5 */ -#define PSDMR_SDAM_A17_IS_A5 0x04000000 /* SDRAM Address Multiplex A17 is A5 */ -#define PSDMR_SDAM_A18_IS_A5 0x05000000 /* SDRAM Address Multiplex A18 is A5 */ - -#define PSDMR_BSMA_A12_A14 0x00000000 /* A12 - A14 */ -#define PSDMR_BSMA_A13_A15 0x00200000 /* A13 - A15 */ -#define PSDMR_BSMA_A14_A16 0x00400000 /* A14 - A16 */ -#define PSDMR_BSMA_A15_A17 0x00600000 /* A15 - A17 */ -#define PSDMR_BSMA_A16_A18 0x00800000 /* A16 - A18 */ -#define PSDMR_BSMA_A17_A19 0x00a00000 /* A17 - A19 */ -#define PSDMR_BSMA_A18_A20 0x00c00000 /* A18 - A20 */ -#define PSDMR_BSMA_A19_A21 0x00e00000 /* A19 - A21 */ - -/* SDA10 values for xSDMR[PBI] = 0 */ -#define PSDMR_SDA10_PBI0_A12 0x00000000 /* "A10" Control is A12 */ -#define PSDMR_SDA10_PBI0_A11 0x00040000 /* "A10" Control is A11 */ -#define PSDMR_SDA10_PBI0_A10 0x00080000 /* "A10" Control is A10 */ -#define PSDMR_SDA10_PBI0_A9 0x000c0000 /* "A10" Control is A9 */ -#define PSDMR_SDA10_PBI0_A8 0x00100000 /* "A10" Control is A8 */ -#define PSDMR_SDA10_PBI0_A7 0x00140000 /* "A10" Control is A7 */ -#define PSDMR_SDA10_PBI0_A6 0x00180000 /* "A10" Control is A6 */ -#define PSDMR_SDA10_PBI0_A5 0x001c0000 /* "A10" Control is A5 */ - -/* SDA10 values for xSDMR[PBI] = 1 */ -#define PSDMR_SDA10_PBI1_A10 0x00000000 /* "A10" Control is A10 */ -#define PSDMR_SDA10_PBI1_A9 0x00040000 /* "A10" Control is A9 */ -#define PSDMR_SDA10_PBI1_A8 0x00080000 /* "A10" Control is A8 */ -#define PSDMR_SDA10_PBI1_A7 0x000c0000 /* "A10" Control is A7 */ -#define PSDMR_SDA10_PBI1_A6 0x00100000 /* "A10" Control is A6 */ -#define PSDMR_SDA10_PBI1_A5 0x00140000 /* "A10" Control is A5 */ -#define PSDMR_SDA10_PBI1_A4 0x00180000 /* "A10" Control is A4 */ -#define PSDMR_SDA10_PBI1_A3 0x001c0000 /* "A10" Control is A3 */ - -#define PSDMR_RFRC_3_CLK 0x00008000 /* 3 Clocks */ -#define PSDMR_RFRC_4_CLK 0x00010000 /* 4 Clocks */ -#define PSDMR_RFRC_5_CLK 0x00018000 /* 5 Clocks */ -#define PSDMR_RFRC_6_CLK 0x00020000 /* 6 Clocks */ -#define PSDMR_RFRC_7_CLK 0x00028000 /* 7 Clocks */ -#define PSDMR_RFRC_8_CLK 0x00030000 /* 8 Clocks */ -#define PSDMR_RFRC_16_CLK 0x00038000 /* 16 Clocks */ - -#define PSDMR_PRETOACT_8W 0x00000000 /* 8 Clock-cycle Wait States */ -#define PSDMR_PRETOACT_1W 0x00001000 /* 1 Clock-cycle Wait States */ -#define PSDMR_PRETOACT_2W 0x00002000 /* 2 Clock-cycle Wait States */ -#define PSDMR_PRETOACT_3W 0x00003000 /* 3 Clock-cycle Wait States */ -#define PSDMR_PRETOACT_4W 0x00004000 /* 4 Clock-cycle Wait States */ -#define PSDMR_PRETOACT_5W 0x00005000 /* 5 Clock-cycle Wait States */ -#define PSDMR_PRETOACT_6W 0x00006000 /* 6 Clock-cycle Wait States */ -#define PSDMR_PRETOACT_7W 0x00007000 /* 7 Clock-cycle Wait States */ - -#define PSDMR_ACTTORW_8W 0x00000000 /* 8 Clock-cycle Wait States */ -#define PSDMR_ACTTORW_1W 0x00000200 /* 1 Clock-cycle Wait States */ -#define PSDMR_ACTTORW_2W 0x00000400 /* 2 Clock-cycle Wait States */ -#define PSDMR_ACTTORW_3W 0x00000600 /* 3 Clock-cycle Wait States */ -#define PSDMR_ACTTORW_4W 0x00000800 /* 4 Clock-cycle Wait States */ -#define PSDMR_ACTTORW_5W 0x00000a00 /* 5 Clock-cycle Wait States */ -#define PSDMR_ACTTORW_6W 0x00000c00 /* 6 Clock-cycle Wait States */ -#define PSDMR_ACTTORW_7W 0x00000e00 /* 7 Clock-cycle Wait States */ - -#define PSDMR_LDOTOPRE_0C 0x00000000 /* 0 Clock Cycles */ -#define PSDMR_LDOTOPRE_1C 0x00000040 /* 1 Clock Cycles */ -#define PSDMR_LDOTOPRE_2C 0x00000080 /* 2 Clock Cycles */ - -#define PSDMR_WRC_4C 0x00000000 /* 4 Clock Cycles */ -#define PSDMR_WRC_1C 0x00000010 /* 1 Clock Cycles */ -#define PSDMR_WRC_2C 0x00000020 /* 2 Clock Cycles */ -#define PSDMR_WRC_3C 0x00000030 /* 3 Clock Cycles */ - -#define PSDMR_CL_1 0x00000001 /* CAS Latency = 1 */ -#define PSDMR_CL_2 0x00000002 /* CAS Latency = 2 */ -#define PSDMR_CL_3 0x00000003 /* CAS Latency = 3 */ - -/*----------------------------------------------------------------------- - * LSDMR - Local Bus SDRAM Mode Register 10-24 - */ - -/* - * No definitions here - the LSDMR has the same fields as the PSDMR. - */ - -/*----------------------------------------------------------------------- - * MPTPR - Memory Refresh Timer Prescaler Register 10-32 - * See User's Manual Errata for the changed definition (matches the - * 8xx now). The wrong prescaler definition causes excessive refreshes - * (typically "divide by 2" when "divide by 32" is intended) which will - * cause unnecessary memory subsystem slowdown. - */ -#define MPTPR_PTP_MSK 0xff00 /* Periodic Timers Prescaler Mask */ -#define MPTPR_PTP_DIV2 0x2000 /* BRGCLK divided by 2 */ -#define MPTPR_PTP_DIV4 0x1000 /* BRGCLK divided by 4 */ -#define MPTPR_PTP_DIV8 0x0800 /* BRGCLK divided by 8 */ -#define MPTPR_PTP_DIV16 0x0400 /* BRGCLK divided by 16 */ -#define MPTPR_PTP_DIV32 0x0200 /* BRGCLK divided by 32 */ -#define MPTPR_PTP_DIV64 0x0100 /* BRGCLK divided by 64 */ - - -/*----------------------------------------------------------------------- - * TGCR1/TGCR2 - Timer Global Configuration Registers 17-4 - */ -#define TGCR1_CAS2 0x80 /* Cascade Timer 1 and 2 */ -#define TGCR1_STP2 0x20 /* Stop timer 2 */ -#define TGCR1_RST2 0x10 /* Reset timer 2 */ -#define TGCR1_GM1 0x08 /* Gate Mode for Pin 1 */ -#define TGCR1_STP1 0x02 /* Stop timer 1 */ -#define TGCR1_RST1 0x01 /* Reset timer 1 */ -#define TGCR2_CAS4 0x80 /* Cascade Timer 3 and 4 */ -#define TGCR2_STP4 0x20 /* Stop timer 4 */ -#define TGCR2_RST4 0x10 /* Reset timer 4 */ -#define TGCR2_GM2 0x08 /* Gate Mode for Pin 2 */ -#define TGCR2_STP3 0x02 /* Stop timer 3 */ -#define TGCR2_RST3 0x01 /* Reset timer 3 */ - - -/*----------------------------------------------------------------------- - * TMR1-TMR4 - Timer Mode Registers 17-6 - */ -#define TMRx_PS_MSK 0xff00 /* Prescaler Value */ -#define TMRx_CE_MSK 0x00c0 /* Capture Edge and Enable Interrupt*/ -#define TMRx_OM 0x0020 /* Output Mode */ -#define TMRx_ORI 0x0010 /* Output Reference Interrupt Enable*/ -#define TMRx_FRR 0x0008 /* Free Run/Restart */ -#define TMRx_ICLK_MSK 0x0006 /* Timer Input Clock Source mask */ -#define TMRx_GE 0x0001 /* Gate Enable */ - -#define TMRx_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event*/ -#define TMRx_CE_RISING 0x0040 /* Capture on Rising TINx edge only */ -#define TMRx_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */ -#define TMRx_CE_ANY 0x00c0 /* Capture on any TINx edge */ - -#define TMRx_ICLK_IN_CAS 0x0000 /* Internally cascaded input */ -#define TMRx_ICLK_IN_GEN 0x0002 /* Internal General system clock*/ -#define TMRx_ICLK_IN_GEN_DIV16 0x0004 /* Internal General system clk div 16*/ -#define TMRx_ICLK_TIN_PIN 0x0006 /* TINx pin */ - - -/*----------------------------------------------------------------------- - * CMXFCR - CMX FCC Clock Route Register 15-12 - */ -#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ -#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ -#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ -#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ -#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ -#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ -#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ -#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ -#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ - -#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ -#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ -#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ -#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ -#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ -#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ -#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ -#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ - -#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ -#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ -#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ -#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ -#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ -#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ -#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ -#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ - -#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ -#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ -#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ -#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ -#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ -#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ -#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ -#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ - -#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ -#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ -#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ -#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ -#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ -#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ -#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ -#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ - -#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ -#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ -#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ -#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ -#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ -#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ -#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ -#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ - -#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ -#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ -#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ -#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ -#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ -#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ -#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ -#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ - -/*----------------------------------------------------------------------- - * CMXSCR - CMX SCC Clock Route Register 15-14 - */ -#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ -#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ -#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ -#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ -#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ -#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ -#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ -#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ -#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ -#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ -#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ -#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ -#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ -#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ -#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ -#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ - -#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ -#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ -#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ -#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ -#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ -#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ -#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ -#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ -#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ -#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ -#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ -#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ -#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ -#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ -#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ -#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ -#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ -#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ -#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ -#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ -#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ -#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ -#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ -#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ -#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ -#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ -#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ -#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ -#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ -#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ -#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ -#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ -#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ -#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ -#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ -#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ -#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ -#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ -#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ -#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ -#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ -#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ -#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ - -#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ -#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ -#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ -#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ -#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ -#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ -#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ -#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ -#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ -#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ -#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ -#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ -#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ -#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ -#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ - -/*----------------------------------------------------------------------- - * CMXSMR - CMX SMC Clock Route Register 15-17 - */ -#define CMXSMR_SMC1 0x80 /* SMC1 Connection */ -#define CMXSMR_SMC1CS_MSK 0x30 /* SMC1 Clock Source */ -#define CMXSMR_SMC2 0x08 /* SMC2 Connection */ -#define CMXSMR_SMC2CS_MSK 0x03 /* SMC2 Clock Source */ - -#define CMXSMR_SMC1CS_BRG1 0x00 /* SMC1 Tx and Rx Clocks are BRG1 */ -#define CMXSMR_SMC1CS_BRG7 0x10 /* SMC1 Tx and Rx Clocks are BRG7 */ -#define CMXSMR_SMC1CS_CLK7 0x20 /* SMC1 Tx and Rx Clocks are CLK7 */ -#define CMXSMR_SMC1CS_CLK9 0x30 /* SMC1 Tx and Rx Clocks are CLK9 */ - -#define CMXSMR_SMC2CS_BRG2 0x00 /* SMC2 Tx and Rx Clocks are BRG2 */ -#define CMXSMR_SMC2CS_BRG8 0x01 /* SMC2 Tx and Rx Clocks are BRG8 */ -#define CMXSMR_SMC2CS_CLK19 0x02 /* SMC2 Tx and Rx Clocks are CLK19 */ -#define CMXSMR_SMC2CS_CLK20 0x03 /* SMC2 Tx and Rx Clocks are CLK20 */ - -/*----------------------------------------------------------------------- - * miscellaneous - */ - -#define UPMA 1 -#define UPMB 2 -#define UPMC 3 - -#if !defined(__ASSEMBLY__) && defined(CONFIG_WATCHDOG) -static __inline__ void -reset_8260_watchdog(volatile immap_t *immr) -{ - immr->im_siu_conf.sc_swsr = 0x556c; - immr->im_siu_conf.sc_swsr = 0xaa39; -} -#endif /* !__ASSEMBLY && CONFIG_WATCHDOG */ - -#endif /* __MPC8260_H__ */ diff --git a/include/mpc8260_irq.h b/include/mpc8260_irq.h deleted file mode 100644 index 9bee9a3..0000000 --- a/include/mpc8260_irq.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _MPC8260_IRQ_H -#define _MPC8260_IRQ_H - -/****************************************************************************/ -/* most of this was ripped out of include/asm-ppc/irq.h from the Linux/PPC */ -/* source. There was no copyright information in the file. */ - -/* - * this is the # irq's for all ppc arch's (pmac/chrp/prep) - * so it is the max of them all - * - * [let's just worry about 8260 for now - mjj] - */ -#define NR_IRQS 64 - -/* The 8260 has an internal interrupt controller with a maximum of - * 64 IRQs. We will use NR_IRQs from above since it is large enough. - * Don't be confused by the 8260 documentation where they list an - * "interrupt number" and "interrupt vector". We are only interested - * in the interrupt vector. There are "reserved" holes where the - * vector number increases, but the interrupt number in the table does not. - * (Document errata updates have fixed this...make sure you have up to - * date processor documentation -- Dan). - */ -#define NR_SIU_INTS 64 - -/* There are many more than these, we will add them as we need them. -*/ -#define SIU_INT_SMC1 ((uint)0x04) -#define SIU_INT_SMC2 ((uint)0x05) -#define SIU_INT_IRQ1 ((uint)0x13) -#define SIU_INT_IRQ2 ((uint)0x14) -#define SIU_INT_IRQ3 ((uint)0x15) -#define SIU_INT_IRQ4 ((uint)0x16) -#define SIU_INT_IRQ5 ((uint)0x17) -#define SIU_INT_IRQ6 ((uint)0x18) -#define SIU_INT_IRQ7 ((uint)0x19) -#define SIU_INT_FCC1 ((uint)0x20) -#define SIU_INT_FCC2 ((uint)0x21) -#define SIU_INT_FCC3 ((uint)0x22) -#define SIU_INT_SCC1 ((uint)0x28) -#define SIU_INT_SCC2 ((uint)0x29) -#define SIU_INT_SCC3 ((uint)0x2a) -#define SIU_INT_SCC4 ((uint)0x2b) - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) - -#endif /* _MPC8260_IRQ_H */ diff --git a/include/post.h b/include/post.h index d5b4062..8bee125 100644 --- a/include/post.h +++ b/include/post.h @@ -29,10 +29,6 @@ #define _POST_WORD_ADDR \ (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#elif defined(CONFIG_MPC8260) -#include <asm/cpm_8260.h> -#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) - #elif defined(CONFIG_MPC8360) #include <linux/immap_qe.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 8288433..53141b1 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -93,31 +93,7 @@ #define EID 81 #endif /* CONFIG_5xx */
-#if defined(CONFIG_MPC8260) - -#define HID2 1011 - -#define HID0_IFEM (1<<7) - -#define HID0_ICE_BITPOS 16 -#define HID0_DCE_BITPOS 17 - -#define IM_REGBASE 0x10000 -#define IM_SYPCR (IM_REGBASE+0x0004) -#define IM_SWSR (IM_REGBASE+0x000e) -#define IM_BR0 (IM_REGBASE+0x0100) -#define IM_OR0 (IM_REGBASE+0x0104) -#define IM_BR1 (IM_REGBASE+0x0108) -#define IM_OR1 (IM_REGBASE+0x010c) -#define IM_BR2 (IM_REGBASE+0x0110) -#define IM_OR2 (IM_REGBASE+0x0114) -#define IM_MPTPR (IM_REGBASE+0x0184) -#define IM_PSDMR (IM_REGBASE+0x0190) -#define IM_PSRT (IM_REGBASE+0x019c) -#define IM_IMMR (IM_REGBASE+0x01a8) -#define IM_SCCR (IM_REGBASE+0x0c80) - -#elif defined(CONFIG_MPC5xxx) +#if defined(CONFIG_MPC5xxx)
#define HID0_ICE_BITPOS 16 #define HID0_DCE_BITPOS 17 diff --git a/post/drivers/memory.c b/post/drivers/memory.c index 89725fa..b410502 100644 --- a/post/drivers/memory.c +++ b/post/drivers/memory.c @@ -170,14 +170,7 @@ DECLARE_GLOBAL_DATA_PTR; */ static void move64(const unsigned long long *src, unsigned long long *dest) { -#if defined(CONFIG_MPC8260) - asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ - "stfd 0, 0(4)" /* *dest = fpr0 */ - : : : "fr0" ); /* Clobbers fr0 */ - return; -#else *dest = *src; -#endif }
/* diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 9619ff4..abe464d 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -35,7 +35,6 @@ CONFIG_5xx_CONS_SCI2 CONFIG_5xx_GCLK_FREQ CONFIG_64BIT_PHYS_ADDR CONFIG_66 -CONFIG_8260_CLKIN CONFIG_8349_CLKIN CONFIG_83XX CONFIG_83XX_CLKIN @@ -435,7 +434,6 @@ CONFIG_CONS_EXTC_PINSEL CONFIG_CONS_EXTC_RATE CONFIG_CONS_NONE CONFIG_CONS_ON_SCC -CONFIG_CONS_ON_SMC CONFIG_CONS_SCIF0 CONFIG_CONS_SCIF1 CONFIG_CONS_SCIF2 @@ -795,13 +793,11 @@ CONFIG_ETH2ADDR CONFIG_ETHADDR CONFIG_ETHBASE CONFIG_ETHER_INDEX -CONFIG_ETHER_LOOPBACK_TEST CONFIG_ETHER_NONE CONFIG_ETHER_ON_FCC CONFIG_ETHER_ON_FCC1 CONFIG_ETHER_ON_FCC2 CONFIG_ETHER_ON_FCC3 -CONFIG_ETHER_ON_SCC CONFIG_ETHPRIME CONFIG_ETH_BUFSIZE CONFIG_ETH_RXSIZE @@ -1072,7 +1068,6 @@ CONFIG_HAS_FSL_MPH_USB CONFIG_HAS_FSL_XHCI_USB CONFIG_HAS_POST CONFIG_HAVE_ACPI_RESUME -CONFIG_HAVE_OWN_RESET CONFIG_HCLK_FREQ CONFIG_HDBOOT CONFIG_HDMI_ENCODER_I2C_ADDR @@ -1357,11 +1352,6 @@ CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_KEYSTONE_RBL_NAND CONFIG_KEY_REVOCATION CONFIG_KGDB_BAUDRATE -CONFIG_KGDB_EXTC_PINSEL -CONFIG_KGDB_EXTC_RATE -CONFIG_KGDB_INDEX -CONFIG_KGDB_ON_SCC -CONFIG_KGDB_ON_SMC CONFIG_KGDB_SER_INDEX CONFIG_KILAUEA CONFIG_KIRKWOOD_EGIGA_INIT @@ -1381,7 +1371,6 @@ CONFIG_KMSUPX5 CONFIG_KMTEGR1 CONFIG_KMTEPR2 CONFIG_KMVECT1 -CONFIG_KM_82XX CONFIG_KM_BOARD_EXTRA_ENV CONFIG_KM_BOARD_NAME CONFIG_KM_COGE5UN @@ -1672,9 +1661,6 @@ CONFIG_MPC555 CONFIG_MPC5xxx_FEC CONFIG_MPC5xxx_FEC_MII10 CONFIG_MPC5xxx_FEC_MII100 -CONFIG_MPC8247 -CONFIG_MPC8255 -CONFIG_MPC8272_FAMILY CONFIG_MPC8308 CONFIG_MPC8308RDB CONFIG_MPC8308_P1M @@ -2771,9 +2757,6 @@ CONFIG_SYS_AUXCORE_BOOTDATA CONFIG_SYS_BARGSIZE CONFIG_SYS_BASE_BAUD CONFIG_SYS_BAUDRATE_TABLE -CONFIG_SYS_BCR -CONFIG_SYS_BCR_60x -CONFIG_SYS_BCR_SINGLE CONFIG_SYS_BCSR CONFIG_SYS_BCSR3_PCIE CONFIG_SYS_BCSR5_PCI66EN @@ -2824,8 +2807,6 @@ CONFIG_SYS_BOOT_RAMDISK_HIGH CONFIG_SYS_BR0_64M CONFIG_SYS_BR0_8M CONFIG_SYS_BR0_PRELIM -CONFIG_SYS_BR10_PRELIM -CONFIG_SYS_BR11_PRELIM CONFIG_SYS_BR1_PRELIM CONFIG_SYS_BR2_PRELIM CONFIG_SYS_BR3_CAN @@ -2837,8 +2818,6 @@ CONFIG_SYS_BR6_64M CONFIG_SYS_BR6_8M CONFIG_SYS_BR6_PRELIM CONFIG_SYS_BR7_PRELIM -CONFIG_SYS_BR8_PRELIM -CONFIG_SYS_BR9_PRELIM CONFIG_SYS_BRIGHTNESS CONFIG_SYS_BUSCLK CONFIG_SYS_CACHELINE_SHIFT @@ -2898,7 +2877,6 @@ CONFIG_SYS_CMXFCR_MASK3 CONFIG_SYS_CMXFCR_VALUE1 CONFIG_SYS_CMXFCR_VALUE2 CONFIG_SYS_CMXFCR_VALUE3 -CONFIG_SYS_CMXSCR_VALUE CONFIG_SYS_CORE_SRAM CONFIG_SYS_CORE_SRAM_SIZE CONFIG_SYS_CORTEX_R4 @@ -2925,14 +2903,10 @@ CONFIG_SYS_CPLD_SIZE CONFIG_SYS_CPMFCR_RAMTYPE CONFIG_SYS_CPM_BOOTCOUNT_ADDR CONFIG_SYS_CPM_INTERRUPT -CONFIG_SYS_CPM_POST_WORD_ADDR CONFIG_SYS_CPRI CONFIG_SYS_CPRI_CLK CONFIG_SYS_CPUSPEED CONFIG_SYS_CPU_CLK -CONFIG_SYS_CPU_PCI_IO_START -CONFIG_SYS_CPU_PCI_MEMIO_START -CONFIG_SYS_CPU_PCI_MEM_START CONFIG_SYS_CS0_BASE CONFIG_SYS_CS0_CFG CONFIG_SYS_CS0_CTRL @@ -3294,7 +3268,6 @@ CONFIG_SYS_DEBUG CONFIG_SYS_DEBUG_SERVER_FW_ADDR CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR CONFIG_SYS_DECREMENT_PATTERNS -CONFIG_SYS_DEFAULT_IMMR CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS CONFIG_SYS_DEFAULT_MBAR CONFIG_SYS_DEFAULT_VIDEO_MODE @@ -4052,14 +4025,6 @@ CONFIG_SYS_HOSTNAME CONFIG_SYS_HRCW_HIGH CONFIG_SYS_HRCW_HIGH_BASE CONFIG_SYS_HRCW_LOW -CONFIG_SYS_HRCW_MASTER -CONFIG_SYS_HRCW_SLAVE1 -CONFIG_SYS_HRCW_SLAVE2 -CONFIG_SYS_HRCW_SLAVE3 -CONFIG_SYS_HRCW_SLAVE4 -CONFIG_SYS_HRCW_SLAVE5 -CONFIG_SYS_HRCW_SLAVE6 -CONFIG_SYS_HRCW_SLAVE7 CONFIG_SYS_HSDRAMC CONFIG_SYS_HWINFO_MAGIC CONFIG_SYS_HWINFO_OFFSET @@ -4501,7 +4466,6 @@ CONFIG_SYS_MATRIX_EBI0CSA_VAL CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_MCFG_REMAP CONFIG_SYS_MAXARGS -CONFIG_SYS_MAXIDLE CONFIG_SYS_MAX_DATAFLASH_BANKS CONFIG_SYS_MAX_DDR_BAT_SIZE CONFIG_SYS_MAX_DOC_DEVICE @@ -4716,13 +4680,6 @@ CONFIG_SYS_MPC8xxx_PIC_ADDR CONFIG_SYS_MPC92469AC CONFIG_SYS_MPEG_BASE CONFIG_SYS_MPEG_SIZE -CONFIG_SYS_MPTPR -CONFIG_SYS_MPTPR_1BK_2K -CONFIG_SYS_MPTPR_1BK_4K -CONFIG_SYS_MPTPR_1BK_8K -CONFIG_SYS_MPTPR_2BK_2K -CONFIG_SYS_MPTPR_2BK_4K -CONFIG_SYS_MPTPR_2BK_8K CONFIG_SYS_MRAM_BASE CONFIG_SYS_MRAM_SIZE CONFIG_SYS_MRS_OFFS @@ -4938,8 +4895,6 @@ CONFIG_SYS_OR0_8M CONFIG_SYS_OR0_PRELIM CONFIG_SYS_OR0_REMAP CONFIG_SYS_OR1 -CONFIG_SYS_OR10_PRELIM -CONFIG_SYS_OR11_PRELIM CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR2_PRELIM @@ -4953,8 +4908,6 @@ CONFIG_SYS_OR6_64M CONFIG_SYS_OR6_8M CONFIG_SYS_OR6_PRELIM CONFIG_SYS_OR7_PRELIM -CONFIG_SYS_OR8_PRELIM -CONFIG_SYS_OR9_PRELIM CONFIG_SYS_OR_TIMING_FLASH CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ CONFIG_SYS_OR_TIMING_MRAM @@ -5177,8 +5130,6 @@ CONFIG_SYS_PCIE_MMAP_SIZE CONFIG_SYS_PCIE_NR_PORTS CONFIG_SYS_PCIE_PHYS CONFIG_SYS_PCIE_VIRT -CONFIG_SYS_PCIMSK0_MASK -CONFIG_SYS_PCIMSK1_MASK CONFIG_SYS_PCISPEED_66 CONFIG_SYS_PCI_64BIT CONFIG_SYS_PCI_BAR0 @@ -5222,17 +5173,6 @@ CONFIG_SYS_PCI_MEM_SIZE CONFIG_SYS_PCI_MMIO_BASE CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_SIZE -CONFIG_SYS_PCI_MSTR0_LOCAL -CONFIG_SYS_PCI_MSTR1_LOCAL -CONFIG_SYS_PCI_MSTR_IO_BUS -CONFIG_SYS_PCI_MSTR_IO_LOCAL -CONFIG_SYS_PCI_MSTR_IO_SIZE -CONFIG_SYS_PCI_MSTR_MEMIO_BUS -CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL -CONFIG_SYS_PCI_MSTR_MEMIO_SIZE -CONFIG_SYS_PCI_MSTR_MEM_BUS -CONFIG_SYS_PCI_MSTR_MEM_LOCAL -CONFIG_SYS_PCI_MSTR_MEM_SIZE CONFIG_SYS_PCI_NR_INBOUND_WIN CONFIG_SYS_PCI_PHYS CONFIG_SYS_PCI_PTM1LA @@ -5305,7 +5245,6 @@ CONFIG_SYS_PHYS_ADDR_HIGH CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_PIB_BASE CONFIG_SYS_PIB_WINDOW_SIZE -CONFIG_SYS_PICMR0_MASK_ATTRIB CONFIG_SYS_PIOC_ASR_VAL CONFIG_SYS_PIOC_BSR_VAL CONFIG_SYS_PIOC_PDR_VAL @@ -5343,9 +5282,6 @@ CONFIG_SYS_PMAN CONFIG_SYS_PMC_BASE CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PME_CLK -CONFIG_SYS_POCMR0_MASK_ATTRIB -CONFIG_SYS_POCMR1_MASK_ATTRIB -CONFIG_SYS_POCMR2_MASK_ATTRIB CONFIG_SYS_PORTTC CONFIG_SYS_POST_BSPEC1 CONFIG_SYS_POST_BSPEC2 @@ -5395,9 +5331,7 @@ CONFIG_SYS_PSC1 CONFIG_SYS_PSC3 CONFIG_SYS_PSC4 CONFIG_SYS_PSC6 -CONFIG_SYS_PSDMR CONFIG_SYS_PSDPAR -CONFIG_SYS_PSRT CONFIG_SYS_PSSR_VAL CONFIG_SYS_PTCPAR CONFIG_SYS_PTDPAR @@ -5440,7 +5374,6 @@ CONFIG_SYS_RCAR_I2C2_BASE CONFIG_SYS_RCAR_I2C2_SPEED CONFIG_SYS_RCAR_I2C3_BASE CONFIG_SYS_RCAR_I2C3_SPEED -CONFIG_SYS_RCCR CONFIG_SYS_RCWH_PCIHOST CONFIG_SYS_READ_SPD CONFIG_SYS_REDUNDAND_ENVIRONMENT @@ -5457,7 +5390,6 @@ CONFIG_SYS_RIO_MEM_BUS CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_SIZE CONFIG_SYS_RIO_MEM_VIRT -CONFIG_SYS_RMR CONFIG_SYS_ROM_BASE CONFIG_SYS_ROOTPATH CONFIG_SYS_RSTC_RMR_VAL @@ -5497,7 +5429,6 @@ CONFIG_SYS_SCCR_TSEC2ON CONFIG_SYS_SCCR_TSECCM CONFIG_SYS_SCCR_USBDRCM CONFIG_SYS_SCCR_USBMPHCM -CONFIG_SYS_SCC_TOUT_LOOP CONFIG_SYS_SCR CONFIG_SYS_SCRATCH_VA CONFIG_SYS_SCSI_MAXDEVICE @@ -5663,8 +5594,6 @@ CONFIG_SYS_SICRL CONFIG_SYS_SIL1178_I2C CONFIG_SYS_SIMULATE_SPD_EEPROM CONFIG_SYS_SIUMCR -CONFIG_SYS_SIUMCR_HIGH -CONFIG_SYS_SIUMCR_LOW CONFIG_SYS_SJA1000_BASE CONFIG_SYS_SMALL_FLASH CONFIG_SYS_SMC0_CYCLE0_VAL @@ -5672,7 +5601,6 @@ CONFIG_SYS_SMC0_MODE0_VAL CONFIG_SYS_SMC0_PULSE0_VAL CONFIG_SYS_SMC0_SETUP0_VAL CONFIG_SYS_SMC_CSR0_VAL -CONFIG_SYS_SMC_RXBUFLEN CONFIG_SYS_SMI_BASE CONFIG_SYS_SPANSION_BASE CONFIG_SYS_SPANSION_BOOT @@ -5701,7 +5629,6 @@ CONFIG_SYS_SPI_FLASH_U_BOOT_DST CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE CONFIG_SYS_SPI_FLASH_U_BOOT_START -CONFIG_SYS_SPI_INIT_OFFSET CONFIG_SYS_SPI_KERNEL_OFFS CONFIG_SYS_SPI_MXC_WAIT CONFIG_SYS_SPI_RTC_DEVID @@ -5766,7 +5693,6 @@ CONFIG_SYS_TIMER_COUNTS_DOWN CONFIG_SYS_TIMER_PRESCALER CONFIG_SYS_TIMER_RATE CONFIG_SYS_TLB_FOR_BOOT_FLASH -CONFIG_SYS_TMCNTSC CONFIG_SYS_TMPVIRT CONFIG_SYS_TMRINTR_MASK CONFIG_SYS_TMRINTR_NO @@ -6175,7 +6101,6 @@ CONFIG_USB_GADGET_GOKU CONFIG_USB_GADGET_IMX CONFIG_USB_GADGET_M66592 CONFIG_USB_GADGET_MASS_STORAGE -CONFIG_USB_GADGET_MPC8272 CONFIG_USB_GADGET_MQ11XX CONFIG_USB_GADGET_MUSBHSFC CONFIG_USB_GADGET_N9604