Just a reminder to apply this patch.
Cheers, Vikas
-----Original Message----- From: Vikas MANOCHA Sent: Friday, February 05, 2016 10:43 AM To: albert.u.boot@aribaud.net; hs@denx.de Cc: Vikas MANOCHA; Simon Glass; Stefan Roese; Przemyslaw Marczak; rev13@wp.pl; open list Subject: [PATCH v3] arm: use common instructions applicable to armv7m & other arm archs
This patch cleans the code by using instructions allowed for armv7m as well as other Arm archs.
Signed-off-by: Vikas Manocha vikas.manocha@st.com Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Heiko Schocher hs@denx.de
Changes in v3: moved the comment to right location. Changes in v2: reword message commit. Removed info regarding BIC instruction on SP, was creating confusion.
arch/arm/lib/crt0.S | 25 +++++++------------------ 1 file changed, 7 insertions(+), 18 deletions(-)
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 2f4c14e..d9078aa 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -71,18 +71,12 @@ ENTRY(_main) */
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
- ldr sp, =(CONFIG_SPL_STACK)
- ldr r0, =(CONFIG_SPL_STACK)
#else
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- ldr r0, =(CONFIG_SYS_INIT_SP_ADDR)
#endif -#if defined(CONFIG_CPU_V7M) /* v7M forbids using SP as BIC destination */
- mov r3, sp
- bic r3, r3, #7
- mov sp, r3
-#else
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
-#endif
- mov r0, sp
- bic r0, r0, #7 /* 8-byte alignment for ABI compliance */
- mov sp, r0 bl board_init_f_alloc_reserve mov sp, r0 /* set up gd here, outside any C code */ @@ -100,14 +94,9 @@
ENTRY(_main)
- 'here' but relocated.
*/
- ldr sp, [r9, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
-#if defined(CONFIG_CPU_V7M) /* v7M forbids using SP as BIC destination */
- mov r3, sp
- bic r3, r3, #7
- mov sp, r3
-#else
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
-#endif
- ldr r0, [r9, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
- bic r0, r0, #7 /* 8-byte alignment for ABI compliance */
- mov sp, r0 ldr r9, [r9, #GD_BD] /* r9 = gd->bd */ sub r9, r9, #GD_SIZE /* new GD is below bd */
-- 1.9.1