Obviously the mask for the rx and tx select field cannot be right, as it would overlap in one and exceed the 32-bit register in the other case. From looking at the neighbouring bits it looks like the mask should be really 4 bits wide instead of 8.
Pointed out by a GCC 6.2 (default) warning.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- drivers/phy/marvell/comphy_a3700.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/marvell/comphy_a3700.h b/drivers/phy/marvell/comphy_a3700.h index eb2ed7b..dd60b88 100644 --- a/drivers/phy/marvell/comphy_a3700.h +++ b/drivers/phy/marvell/comphy_a3700.h @@ -33,9 +33,9 @@ #define rb_pin_pu_tx BIT(18) #define rb_pin_tx_idle BIT(19) #define rf_gen_rx_sel_shift 22 -#define rf_gen_rx_select (0xFF << rf_gen_rx_sel_shift) +#define rf_gen_rx_select (0x0F << rf_gen_rx_sel_shift) #define rf_gen_tx_sel_shift 26 -#define rf_gen_tx_select (0xFF << rf_gen_tx_sel_shift) +#define rf_gen_tx_select (0x0F << rf_gen_tx_sel_shift) #define rb_phy_rx_init BIT(30)
#define COMPHY_PHY_STAT1_ADDR(lane) MVEBU_REG(0x018318 + (lane) * 0x28)