When compiling the SPL for the Allwinner A64 in AArch64 mode, we can't use the more compact Thumb2 encoding, which only exists for AArch32 code. This makes the SPL rather big, up to a point where any code additions or even a different compiler may easily exceed the 32KB limit that the Allwinner BROM imposes. Introduce a separate, mostly generic sun50i-a64 configuration, which defines the CPU_V7 symbol and thus will create a 32-bit binary using the memory-saving Thumb2 encoding. This should only be used for the SPL, the U-Boot proper should still be using the existing 64-bit configuration. The SPL code can switch to AArch64 if needed, so a 32-bit SPL can be combined with a 64-bit U-Boot proper to eventually launch arm64 kernels.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- board/sunxi/Kconfig | 14 ++++++++++++-- configs/pine64_plus_defconfig | 2 +- configs/sun50i_spl32_defconfig | 10 ++++++++++ 3 files changed, 23 insertions(+), 3 deletions(-) create mode 100644 configs/sun50i_spl32_defconfig
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 0001133..0d77c3a 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -43,6 +43,10 @@ config SUNXI_GEN_SUN6I watchdog, etc.
+config MACH_SUN50I + bool + select SUNXI_GEN_SUN6I + choice prompt "Sunxi SoC Variant" optional @@ -121,10 +125,16 @@ config MACH_SUN9I select SUNXI_GEN_SUN6I select SUPPORT_SPL
-config MACH_SUN50I +config MACH_SUN50I_64 bool "sun50i (Allwinner A64)" + select MACH_SUN50I select ARM64 - select SUNXI_GEN_SUN6I + select SUPPORT_SPL + +config MACH_SUN50I_32 + bool "sun50i (Allwinner A64) SPL-32bit" + select MACH_SUN50I + select CPU_V7 select SUPPORT_SPL
endchoice diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index 2374170..a76f66a 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN50I=y +CONFIG_MACH_SUN50I_64=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y diff --git a/configs/sun50i_spl32_defconfig b/configs/sun50i_spl32_defconfig new file mode 100644 index 0000000..29c6a47 --- /dev/null +++ b/configs/sun50i_spl32_defconfig @@ -0,0 +1,10 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN50I_32=y +CONFIG_SPL=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_MMC_SUNXI_SLOT_EXTRA=2